High-performance CdS–ZnS Core–shell Nanorod Array Photoelectrode for Photoelectrochemical Hydrogen Generation

Jian Zhang,Lianhui Wang,Xiaoheng Liu,Xing'ao Li,Wei Huang

DOI: https://doi.org/10.1039/c4ta04951a

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:High-performance CdS–ZnS core–shell nanorod array photoelectrode for photoelectrochemical hydrogen generation from water.

What problem does this paper attempt to address?

(Invited) Si/NiCoSex Nanorods Photocathode for Enhanced Photoelectrochemical Hydrogen Production

Xingwang Zhang,Hongxiu Zhang,Denghong He

DOI: https://doi.org/10.1149/ma2016-02/34/2233

2016-01-01

ECS Meeting Abstracts

Abstract:Hydrogen is considered as the ideally sustainable alternative to fossil fuels. Photoelectrochemical (PEC) water splitting is attractive as it can store solar energy in the form of hydrogen. Silicon as an earth-abundant and efficient visible light absorption material has been widely used in PEC for hydrogen generation. However, achieving a high photocurrent density still faces a challenge when utilizing silicon as a photocathode owing to its sluggish hydrogen evolution reaction (HER) kinetics and low light harvesting capability. Here, we design a novel one-dimensional photocathodes - Si/NiCoSex nanorods using a facile photo-assistant electrodeposition method and demonstrate their enhanced PEC hydrogen production performance with high photocurrent density. Si nanorods were covered with NiCoSex electrocatalysts, where electrons efficiently diffuse across the electrode/electrolyte interface. The synergy effects of the high light harvesting of Si nanorod morphology and NiCoSex electrocatalyst enhanced the production and utilization of photogenerated electrons. The high quality junctions between one-dimensional semiconductor and electrocatalyst for charge collection and utilization is significant to enhance the efficiency of water splitting for hydrogen generation. The improved charge separation and hydrogen evolution reaction kinetics on the electrode-electrolyte interface were confirmed. Furthermore, we expect that inducting the buried junction of Si or optimizing the electrode/electrolyte interface might further boost the PEC-HER performance of the Si/NiCoSex nanorods, making it a more competitive candidate for PEC-HER photocathode. The reported new Si/NiCoSex nanorods photocathode offers a new strategy for preparing efficient solar energy conversion devices.
Direct Z-scheme CdS-CdS Nanorod Arrays Photoanode: Synthesis, Characterization and Photoelectrochemical Performance

Yi Fan,Zhi-min Song,Jing-jing Dong,Zhi-yu Wang,Yue Yang,Xiao-di Zhu,Song Sun,Chen Gao,Jun Bao

DOI: https://doi.org/10.1063/1674-0068/cjcp1905090

IF: 1.09

2019-01-01

Chinese Journal of Chemical Physics

Abstract:Direct Z-scheme CdO-CdS 1-dimensional nanorod arrays were constructed through a facile and simple hydrothermal process. The structure, morphology, photoelectrochemical properties and H2 evolution activity of this catalyst were investigated systematically. The morphology of the obtained nanorod is a regular hexagonal prism with 100-200 nm in diameter. The calcination temperature and time were optimized carefully to achieve the highest photoelectrochemical performance. The as-fabricated hybrid system achieved a photocurrent density up to 6.5 mA/cm2 and H2 evolution rate of 240 µmol·cm−2·h−1 at 0 V vs. Ag/AgCl, which is about 2-fold higher than that of the bare CdS nanorod arrays. The PEC performance exceeds those previously reported similar systems. A direct Z-scheme photocatalytic mechanism was proposed based on the structure and photoelectrochemical performance characterization results, which can well explain the high separation efficiency of photoinduced carriers and the excellent redox ability.
A Cocatalyst-Free CdS Nanorod/zns Nanoparticle Composite for High-Performance Visible-Light-driven Hydrogen Production from Water

Daochuan Jiang,Zijun Sun,Hongxing Jia,Dapeng Lu,Pingwu Du

DOI: https://doi.org/10.1039/c5ta07420g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Highly efficient, visible-light-induced hydrogen (H2) production via water splitting can be achieved without the help of a cocatalyst by using a noble-metal-free core–shell photocatalyst, in which zinc sulfide (ZnS) nanoparticles are anchored on cadmium sulfide nanorods (CdS NRs).
Hierarchical Cds Nanorod@Sno2 Nanobowl Arrays For Efficient And Stable Photoelectrochemical Hydrogen Generation

Wenhui Wang,Can Jin,Limin Qi

DOI: https://doi.org/10.1002/smll.201801352

IF: 13.3

2018-01-01

Small

Abstract:An efficient photoanode based on CdS nanorod@SnO2 nanobowl (CdS NR@SnO2 NB) arrays is designed and fabricated by the preparation of SnO2 nanobowl arrays via nanosphere lithography followed by hydrothermal growth of CdS nanorods on the inner surface of the SnO2 nanobowls. A photoelectrochemical (PEC) device constructed by using this hierarchical CdS NR@SnO2 NB photoanode presents significantly enhanced performance with a photocurrent density of 3.8 mA cm(-2) at 1.23 V versus a reversible hydrogen electrode (RHE) under AM1.5G solar light irradiation, which is about 2.5 times higher than that of CdS nanorod arrays. After coating with a thin layer of SiO2, the photostability of the CdS NR@SnO2 NB arrays is greatly enhanced, resulting in a stable photoanode with a photocurrent density of 3.0 mA cm(-2) retained at 1.23 V versus the RHE. The much improved performance of the CdS NR@SnO2 NB arrays toward PEC hydrogen generation can be ascribed to enlarged surface area arising from the hierarchical nanostructures, improved light harvesting owing to the NR@NB architecture containing multiple scattering centers, and enhanced charge separation/collection efficiency due to the favorable CdS-SnO2 heterojunction.
Controlled Growth of 3D CdS-Branched ZnO Nanorod Arrays for Efficient Solar Driven Photoelectrochemical Water Splitting

Rem Yann,Sreymean Ngok,Xianjie Liu,Magnus Willander,Chan Oeurn Chey,Omer Nur

DOI: https://doi.org/10.1016/j.solidstatesciences.2024.107600

IF: 3.752

2024-06-07

Solid State Sciences

Abstract:While world energy consumption is rising every year, the development of clean and renewable energy sources becomes very important for keeping the standard of living and preserving the environment. Solar driven photoelectrochemical (PEC) water splitting to produce hydrogen and oxygen is a promising method to contribute to the energy increasing demand. The development of the photoelectrode is a key factor for improving the PEC performance. A new morphology of 3D CdS-branched ZnO nanorod array nanocomposite has successfully been synthesized via solution routes as a photoanode. The present nanocomposite provides the highest photocurrent density of 2.5 mA/cm 2 at a potential 1.23 V vs. RHE, which is about 83.3 times compared to a photocurrent density of 0.03 mA/cm 2 of the bare ZnO nanorod array photoelectrode. The boost of the PEC performance is improved due to the improvement of light absorption capacity, the enhanced energy band alignment (type-II heterostructure) promoting the charge transfer and separation, and the improvement of the electrode-electrolyte interface kinetic reactions. The result will be useful for further research on energy conversion and energy storage devices.

chemistry, physical, inorganic & nuclear,physics, condensed matter
A P-Si/nicosex Core/shell Nanopillar Array Photocathode for Enhanced Photoelectrochemical Hydrogen Production

Hongxiu Zhang,Qi Ding,Denghong He,Hu Liu,Wei Liu,Zhongjian Li,Bin Yang,Xingwang Zhang,Lecheng Lei,Song Jin

DOI: https://doi.org/10.1039/c6ee02215d

IF: 32.5

2016-01-01

Energy & Environmental Science

Abstract:We report the rational design and successful preparation of p-Si/NiCoSex core/shell nanopillar array photocathodes for enhanced solar-driven photoelectrochemical hydrogen generation.
Surface Plasmon Resonance Enhanced Light Absorption of Au Decorated Composition-Tuned ZnO/ZnxCd1−xSeyTe1−y Core/shell Nanowires for Efficient H2 Production

Xueying Zhan,Yanjun Bao,Fengmei Wang,Qisheng Wang,Zhongzhou Cheng,Zhenxing Wang,Kai Xu,Zheyu Fang,Jun He

DOI: https://doi.org/10.1063/1.4916397

IF: 4

2015-01-01

Applied Physics Letters

Abstract:Efficient solar-to-hydrogen photoelectrodes need harvest sunlight to capacity and improve the separation efficiency of charge carriers for chemical reactions in water. Herein, we demonstrate the merits of type-II heterostructures with component controllable quaternary shells (ZnxCd1−xSeyTe1−y) and the surface plasmon resonance of Au nanoparticles to satisfy photocatalytic requirements. Our ZnO/ZnxCd1−xSeyTe1−y/Au nanostructures display a broad absorption edge from UV to NIR (Near Infrared) and high charge separation efficiency. The finite element method simulation and UV-vis-NIR diffuse reflectance spectroscopy confirm the enhanced absorption of visible light. Furthermore, these ZnO/ZnxCd1−xSeyTe1−y/Au heterostructures show remarkable hydrogen-production ability from water, suggesting a type of photocatalytic paradigm for H2 production.
Cobalt Phosphate-Modified (GaN) 1– x (ZnO) x /GaN Branched Nanowire Array Photoanodes for Enhanced Photoelectrochemical Performance

Lixin Chen,Xiaorui Yu,Zhe Hua,Qing Liu,Vladimir An,Lizhi Feng,Jiaming Guo,Xinglai Zhang,Jing Li,Baodan Liu

DOI: https://doi.org/10.1021/acsaem.2c03978

IF: 6.4

2023-03-23

ACS Applied Energy Materials

Abstract:Photoelectrochemical water splitting based on suitable catalysts has attracted wide attention as a promising strategy to utilize solar energy to produce clean and renewable hydrogen fuel. Herein, we reported cobalt phosphate-modified (GaN)1–x (ZnO) x /GaN nanowire arrays on a high-temperature conductive GaN substrate toward enhanced photoelectrochemical water splitting by a facile two-step Au-assisted chemical vapor deposition method. The highly conductive Si-doped GaN substrate is designed to serve as a current collector and epitaxial substrate to grow GaN nanowires at high temperature. Meanwhile, high density of branched (GaN)1–x (ZnO) x nanowires with a tunable band gap, strong visible-light absorption, and high catalytic activity is deposited on the surface of GaN nanowires to act as active components to harvest light toward the oxygen evolution reaction. Such multi-junction heterostructures effectively enhance wide spectral utilization and light absorption and simultaneously accelerate the separation of electrons and holes and the transfer of photogenerated electrons from (GaN)1–x (ZnO) x nanowires to the GaN substrate collector and Pt electrode. The photocurrent density of the (GaN)1–x (ZnO) x /GaN nanowire array photoanode can reach 37.5 μA cm–2 at 1.23 V vs reversible hydrogen electrode and could be further enhanced to 186 μA cm–2 by modifying the cobalt phosphate cocatalyst, showing promising potential in clean hydrogen production.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Cadmium sulfide/graphitic carbon nitride heterostructure nanowire loading with a nickel hydroxide cocatalyst for highly efficient photocatalytic hydrogen production in water under visible light

Zhiping Yan,Zijun Sun,Xiang Liu,Hongxing Jia,Pingwu Du

DOI: https://doi.org/10.1039/c6nr00160b

IF: 6.7

2016-01-01

Nanoscale

Abstract:Photocatalytic hydrogen production from water in a noble-metal-free system has attracted much attention in recent years. Herein we report on the use of core/shell cadmium sulfide/graphitic carbon nitride (CdS/g-C3N4) heterojunction nanorods modified by nickel hydroxide (Ni(OH)(2)) as a highly efficient photocatalyst for visible light-driven hydrogen production from water. Due to efficient separation of the photo-excited charge carriers in the CdS/g-C3N4 core/shell nanorods and the synergistic effect of Ni(OH)(2), the optimal hydrogen evolution rate over Ni(OH)(2)-CdS/g-C3N4 is 115.18 mu mol h(-1) mg(-1) under visible light irradiation (lambda > 420 nm), which is 26 times higher than the CdS/g-C3N4 nanorod composite without Ni(OH)(2) and similar to 7 times better than the 0.5 wt% Pt-CdS/g-C3N4 nanorod composite. The apparent quantum efficiency is similar to 16.7% at an excitation of 450 nm. During photocatalysis, no degradation of Ni(OH)(2) was observed based on the XPS data, indicating that it is a robust cocatalyst. Moreover, the present photocatalyst showed excellent photocatalytic stability for hydrogen production and the turnover number (TON) reached similar to 24 600 over 90 hours.
Construction of Al-ZnO/CdS Photoanodes Modified with Distinctive Alumina Passivation Layer for Improvement of Photoelectrochemical Efficiency and Stability.

Ruyi Wang,Xiaodong Li,Lu Wang,Xirui Zhao,Guangcheng Yang,Aidong Li,Congping Wu,Qing Shen,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1039/c8nr06880a

IF: 6.7

2018-01-01

Nanoscale

Abstract:ZnO/CdS-based nanorod arrays (NRs) are an excellent class of photoanode materials, which possess high photoelectric response for solar-driven water splitting. A highly efficient photoanode system consisting of Al-doped ZnO NRs as effective electron-transfer layers and CdS as a light harvesting layer was rationally designed. Al doping increased the conductivity of ZnO NRs and simultaneously coarsened the surface of ZnO due to expansion of ZnO lattice. The rough surface favoured the growth of a CdS coating layer on it through a successive ionic layer adsorption reaction. The integrated ZnO/CdS photoanode exhibited photocurrent of 10.4 mA cm-2 at 1.23 V versus RHE (reversible hydrogen potential) and conversion efficiency of 5.75% at 0.38 V versus RHE for 60 SILAR CdS cycles. The coating of a protective Al2O3 passivation layer through the direct current magnetron sputtering technique significantly improved the stability of the electrode, and it was better than that of the conventional atomic layer deposition method.
FeOOH decorated Sb2Se3@Cd Zn1-S core-shell nanorod heterostructure photocathode for enhancing photoelectrochemical performance

Ming Gong,Yufei Cheng,Chang Xin,Dekang Liu,Xinyang Liu,Enzhou Liu,Hui Miao,Zhenyi Jiang,Xiaoyun Hu

DOI: https://doi.org/10.1016/j.mtcomm.2023.106018

IF: 3.8

2023-06-01

Materials Today Communications

Abstract:In this work, a core-shell heterostructure Sb2Se3@Cd x Zn1-x S photocathode was constructed on the Fluorine-doped Tin Oxide (FTO) by Vapor Transport Deposition (VTD) and hydrothermal method, then β-FeOOH was deposited on the surface of Sb2Se3@Cd0.8Zn0.2S. The investigation indicates that Sb2Se3@Cd x Zn1-x S has a one-dimensional (1D) nanorod structure, which can provide a fast carrier transmission channel. The introduction of a Cd x Zn1-x S shell can accelerate the charge separation of Sb2Se3 and type-II heterojunction between them can enhance the electron migration efficiency of Sb2Se3. Using β-FeOOH as the protective layer can not only protect the ternary photocathode from photocorrosion, but also act as a cocatalyst to enhance surface reaction kinetics. Photoelectrochemical (PEC) tests found that the composite photocathode Sb2Se3@Cd0.8Zn0.2S/β-FeOOH achieves a higher photocurrent density (0.252 mA/cm2), which is about 21 times higher than that of pure Sb2Se3 nanorod photocathode (0.012 mA/cm2) under the same condition, besides, it also exhibited more excellent stability during 1 h hydrogen production. This work provides an effective way to design and fabrication of nanostructures for high-efficiency water splitting photoelectrodes.

materials science, multidisciplinary
Rapid and Efficient Self-Assembly of Au@ZnO Core-Shell Nanoparticle Arrays with an Enhanced and Tunable Plasmonic Absorption for Photoelectrochemical Hydrogen Generation

Yiqiang Sun,Bo Xu,Qi Shen,Lifeng Hang,Dandan Men,Tao Zhang,Huilin Li,Cuncheng Li,Yue Li

DOI: https://doi.org/10.1021/acsami.7b09325

2017-09-20

Abstract:High-quality Au@ZnO core-shell nanoparticle (NP) array films were easily and efficiently fabricated through an air/water interfacial self-assembly. These materials have remarkable visible light absorption capacity and fascinating performance in photoelectrochemical (PEC) water splitting with a photocurrent density of ∼3.08 mA/cm2 at 0.4 V, which is superior to most ZnO-based photoelectrodes in studies. Additionally, the interesting PEC performance could be effectively adjusted by altering the thickness of the ZnO shell and/or the layer number of the array films. Results indicated that the bilayer film based on Au@ZnO NPs with 25 nm shell thickness displayed optimal behavior. The remarkable PEC capability could be ascribed to the enhanced light-harvesting ability of the Au@ZnO structured NPs by the SPR effect and the optimum film thickness. This work demonstrates a desirable paradigm for preparing photoelectrodes based on the synergistic effect of plasmatic NPs as the core and a visible optical absorbent and semiconductor as the shell. Moreover, this work provides a new approach for fabricating optoelectronic anode thin film devices through a self-assembly method.
Enhanced charge separation of NiO/ZnO P-N heterojunction nanorod arrays for photoelectrochemical water splitting

Junhao Cai,Heng Tao,Yaru Peng,Xiang Zhao,Po Hu,Yuan Zhou,Hao Lyu,Youtang Gao,Shuiwang Guo

DOI: https://doi.org/10.1016/j.surfin.2024.105376

IF: 6.2

2024-11-03

Surfaces and Interfaces

Abstract:In pursuing efficient photoelectrochemical (PEC) water splitting, core-shell heterojunction nanowire arrays photoanode have emerged as a promising candidate. This study presents the successful design and construction of a NiO/ZnO p-n heterojunction nanowire array, which facilitates the separation and transmission of charge, effectively suppresses photo corrosion of the photoanode, and showcases remarkable PEC water splitting performance. Specifically, the optimized NiO/ZnO core-shell photoanode exhibited a remarkable 10.5-fold increase in photoelectric conversion efficiency and a 6.6-fold increase in photocurrent density at 1.23 V relative to pure ZnO. Furthermore, an in-depth analysis of the band structure and the PEC water splitting mechanism of the NiO/ZnO photoanode elucidated the advantages of the p-n heterojunction in effectively separating photo-induced carriers. This work introduces a novel concept for the design and optimization of the core-shell structure of efficient solar fuel production, contributing to the development of renewable energy technology.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
TiO2/Au Nanoring/p-Si Nanohole Photocathode for Hydrogen Generation

Liang Zhang,Xingyao Chen,Zongbin Hao,Xinyu Chen,Yang Li,Yushuang Cui,Changsheng Yuan,Haixiong Ge

DOI: https://doi.org/10.1021/acsanm.9b00590

IF: 6.14

2019-01-01

ACS Applied Nano Materials

Abstract:Nowadays, numerous electrochemical and photoelectrochemical (PEC) methods have been utilized for water-splitting hydrogen production. Herein, we designed a novel photocathode based on a TiO2/Au nanoring (AuNR)/Si nanohole (SiNH) hetero-nanostructure (HN), which can be fabricated in a programmable way. The SiNH arrays substrate was prepared by nanoimprint lithography, and then, embedded AuNRs were fabricated by sputtering deposition and subsequent ion beam etching to remove the Au layer covering the horizontal Si surface. Cylindrical AuNRs clinging to the sidewalls of SiNH arrays could maximize the horizontal exposure area of the Si substrate and have little adverse effect on its light absorption. The design is supported by theory simulation and could lead to expectable PEC performance by precisely controlling the geometry and size of the AuNR which will trigger localized surface plasmon resonance (LSPR), bringing about a prominent enhancement of the light harvesting ability and exciting vast hot electrons under light illumination. Generated electrons could transfer across the Schottky junction formed by AuNR and TiO2 to contribute to the hydrogen evolution reaction (HER). The excellent hydrogen production performance with an onset potential of 0.32 V-RHE of our prepared HN electrode could be attributed to the synergetic effect of an electrochemical and PEC process, and the maximum photon-to-energy conversion efficiency reaches 13.3%. The experimental results are in good accordance with the simulation analysis and demonstrate an enhancement of the catalytic performance by optimizing the sizes of those components. This work may provide a new path to boost hydrogen production performance by designing customized HNs with a positive effect for electrocatalysis or photoelectrocatalysis.
Core–shell Amorphous Cobalt Phosphide/cadmium Sulfide Semiconductor Nanorods for Exceptional Photocatalytic Hydrogen Production under Visible Light

Zijun Sun,Bihu Lv,Jingshi Li,Min Xiao,Xiaoyong Wang,Pingwu Du

DOI: https://doi.org/10.1039/c5ta07561k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:We report that a photocatalyst made of amorphous cobalt phosphide (CoPx) integrated with CdS NRs for H2 production under visible light. The CoPx/CdS NRs gave an apparent quantum yield at ∼35% (λ = 450 nm).
Enhanced renewable photoelectrochemical hydrogen production based on CdS nanospheres/NiO nanorods deposited on anodized commercial Zn-Fe mesh as a novel photoanode

Nima Mostafazadeh,Masoud Faraji

DOI: https://doi.org/10.1007/s10800-024-02185-x

IF: 2.925

2024-08-19

Journal of Applied Electrochemistry

Abstract:Economical, easy, and time-saving processes were employed to fabricate CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh for photoelectrochemical water-splitting reaction. The photoanode was fabricated through co-anodizing of commercial galvanized mesh in a solution containing Ni +2 precursor to decorate NiO–ZnO–Fe 2 O 3 nanorods onto the galvanized mesh and followed by dropwise chemical deposition of CdS nanospheres onto the previously modified mesh. The surface investigations showed that the obtained CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh possesses a unique morphology containing nanorods deposited with CdS nanospheres, obtaining a large active surface area for photoelectrochemical water-splitting. UV–VIS diffuse reflectance spectra (DRS) displayed CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh has a lower band gap energy of 2.34 eV compared to ~ 3.9 eV for anodized galvanized mesh, confirming excellent photocatalytic behavior of CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh. The photoelectrochemical water-splitting investigations under visible light irradiation displayed that the H 2 production rate of CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh was about 6455 μmol h −1 cm −2 , which was approximately 5.3, 1.76, and 1.51 times that of galvanized mesh, anodized galvanized mesh, NiO–ZnO–Fe 2 O 3 NRs mesh, respectively. Considering the easy and low-cost preparation of the final photo-anode, it seems that the CdSNSps/NiO–ZnO–Fe 2 O 3 NRs mesh can be used as an appropriate photoelectrode with high efficiency to produce renewable hydrogen gas on an industrial scale.

electrochemistry
Composition-Engineered Heavy-Metal-Free Cu–Ga–Zn–S Nanorods for Efficient Photocatalytic Water Splitting

Zheming Liu,Hao Fu,Yu Li,Jun Liu,Yanbin Huang,Dongxu Zhu,Haihang Ye,Chunhe Yang,Zhijie Wang,Aiwei Tang

DOI: https://doi.org/10.1021/acsanm.3c02430

IF: 6.14

2023-08-01

ACS Applied Nano Materials

Abstract:Semiconductor photocatalysts composed of copper-based chalcogenides have emerged as promising candidates for photocatalytic water splitting, enabling the production of hydrogen and oxygen. The incorporation of extra Zn cations into copper chalcogenides is found to significantly alter their optical and electronic properties, such as band gap, charge carrier transfer, and the separation of photo-generated electron and hole couples. In this work, we developed a colloidal approach to synthesizing one-dimensional (1D) quaternary Cu–Ga–Zn–S nanorods (NRs) with enhanced photocatalytic hydrogen evolution performance. The Cu–Ga–Zn–S NRs demonstrate a Zn-dependent growth mechanism, where Zn cations promote the morphological elongation along the [0001] direction. Through the control of the Ga/Zn feeding molar ratios in Cu–Ga–Zn–S NRs, we achieved the maximum photocatalytic hydrogen production rate of 2101 μmol·g–1·h–1, surpassing both of the Zn-free and Zn-rich counterparts. Such improvement can be attributed to the tailored lifetime of photo-generated charge carriers, charge transfer resistance, and separation efficiency of photo-generated electrons and holes, instead of a slight alteration of band gap. Notably, the optimal Cu–Ga–Zn–S NRs also show an anodic photocurrent and photocatalytic oxygen production activity under solar irradiation. Our study presents a facile method for preparing 1D Cu–Ga–Zn–S NRs via composition engineering and offers valuable insights to develop multifunctional photocatalysts for efficient water splitting.

materials science, multidisciplinary,nanoscience & nanotechnology
Noble-metal-free bimetallic nitride decorated CdS nanorods for photocatalytic hydrogen generation

Lu Chen,Yuzhou Xia,Jiale Shi,Xiaohui Huang,Xiyao Liu,Guiyang Yan,Renkun Huang

DOI: https://doi.org/10.1039/d4ce00216d

IF: 3.756

2024-01-01

CrystEngComm

Abstract:The Ni 3 FeN/CdS photocatalyst exhibits a remarkable photocatalytic hydrogen production rate of 4.6 mmol g −1 h −1 , which is 23.8 times higher than that of pristine CdS. Its apparent quantum efficiency is 13.5% at 420 nm.

chemistry, multidisciplinary,crystallography
Hot electron assisted photoelectrochemical water splitting from Au-decorated ZnO@TiO2 nanorods array

Hongdong Li,Hongyan Liu,Fei Wang,Guodong Li,Xiaoli Wang,Zhiyong Tang

DOI: https://doi.org/10.1007/s12274-022-4203-z

IF: 9.9

2022-04-18

Nano Research

Abstract:Engineering of semiconductor nanomaterials is critical to enhance the photoelectrochemical (PEC) performance for water splitting. However, semiconductors often show the low light absorption, slow charge transfer, and easy recombination of carriers, thus leading to the low catalytic efficiency. In this work, we show facile synthesis of ZnO@TiO2 core-shell nanorods (NRs) arrays modified with Au nanoparticles (NPs) as the photoelectrode for PEC water splitting. Impressively, the obtained ZnO@TiO2 (15 nm)/Au(8 nm) array shows the maximum photocurrent density of 3.14 mA/cm2 at 1.2 V vs. reversible hydrogen electrode (RHE), 2.6 times and 1.7 times higher than those obtained from ZnO NRs and ZnO@TiO2(15 nm) arrays. The electric-field simulation and transient absorption spectroscopy show that the Au-decorated core-shell nanostructures have an enhanced hot electron generation and prolonged decay time, indicating effective charge transfer and recombination inhibition of carriers. This work provides an efficient preparation strategy for photoelectrodes as well as great potential for the large-scale development of this technology.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Improved Photoelectrochemical Performance by Forming a ZnO/ZnS Core/shell Nanorod Array

Mei-rong Sui,Xiu-quan Gu,Mei-lin Shi,Yong Wang,Lin-lin Liu

DOI: https://doi.org/10.1007/s11801-019-8162-x

2019-01-01

Optoelectronics Letters

Abstract:ZnO nanorod arrays (NRAs) were prepared via a facile hydrothermal method for photoelectrochemical (PEC) applications. Then, ZnS thin shell layers were deposited onto them via a facile hydrothermal treatment process for constructing a ZnO/ZnS core/shell structure. It was demonstrated that the PEC activity of a ZnO NRA is enhanced significantly after the surface modification, although there weren’t any obvious changes in the visible-light harvesting efficiency. Both the Nyquist and Mott-Schottky (M-S) plots were employed to reveal the reason, which was attributed to higher electrocatalytic activity of ZnS than that of ZnO and the resulting higher charge transfer efficiency across the solid/liquid interfaces. Finally, a schematic band model was proposed for clarifying the charge carrier transfer mechanism occurred at the interfaces.

High-performance CdS–ZnS Core–shell Nanorod Array Photoelectrode for Photoelectrochemical Hydrogen Generation

(Invited) Si/NiCoSex Nanorods Photocathode for Enhanced Photoelectrochemical Hydrogen Production

Direct Z-scheme CdS-CdS Nanorod Arrays Photoanode: Synthesis, Characterization and Photoelectrochemical Performance

A Cocatalyst-Free CdS Nanorod/zns Nanoparticle Composite for High-Performance Visible-Light-driven Hydrogen Production from Water

Hierarchical Cds Nanorod@Sno2 Nanobowl Arrays For Efficient And Stable Photoelectrochemical Hydrogen Generation

Controlled Growth of 3D CdS-Branched ZnO Nanorod Arrays for Efficient Solar Driven Photoelectrochemical Water Splitting

A P-Si/nicosex Core/shell Nanopillar Array Photocathode for Enhanced Photoelectrochemical Hydrogen Production

Surface Plasmon Resonance Enhanced Light Absorption of Au Decorated Composition-Tuned ZnO/ZnxCd1−xSeyTe1−y Core/shell Nanowires for Efficient H2 Production

Cobalt Phosphate-Modified (GaN) 1– x (ZnO) x /GaN Branched Nanowire Array Photoanodes for Enhanced Photoelectrochemical Performance

Cadmium sulfide/graphitic carbon nitride heterostructure nanowire loading with a nickel hydroxide cocatalyst for highly efficient photocatalytic hydrogen production in water under visible light

Construction of Al-ZnO/CdS Photoanodes Modified with Distinctive Alumina Passivation Layer for Improvement of Photoelectrochemical Efficiency and Stability.

FeOOH decorated Sb2Se3@Cd Zn1-S core-shell nanorod heterostructure photocathode for enhancing photoelectrochemical performance

Rapid and Efficient Self-Assembly of Au@ZnO Core-Shell Nanoparticle Arrays with an Enhanced and Tunable Plasmonic Absorption for Photoelectrochemical Hydrogen Generation

Enhanced charge separation of NiO/ZnO P-N heterojunction nanorod arrays for photoelectrochemical water splitting

TiO2/Au Nanoring/p-Si Nanohole Photocathode for Hydrogen Generation

Core–shell Amorphous Cobalt Phosphide/cadmium Sulfide Semiconductor Nanorods for Exceptional Photocatalytic Hydrogen Production under Visible Light

Enhanced renewable photoelectrochemical hydrogen production based on CdS nanospheres/NiO nanorods deposited on anodized commercial Zn-Fe mesh as a novel photoanode

Composition-Engineered Heavy-Metal-Free Cu–Ga–Zn–S Nanorods for Efficient Photocatalytic Water Splitting

Noble-metal-free bimetallic nitride decorated CdS nanorods for photocatalytic hydrogen generation

Hot electron assisted photoelectrochemical water splitting from Au-decorated ZnO@TiO2 nanorods array

Improved Photoelectrochemical Performance by Forming a ZnO/ZnS Core/shell Nanorod Array