Abstract:To effectively avoid the shuttle effect of polysulfides between the cathode and anode, a boron nitride (BN)-Ketjenblack-x composite (x means 1, 2, and 3 M) cathode for lithium–sulfur batteries with enhanced performance is prepared. Before immobilizing sulfur, BN is in situ grown on pretreated Ketjenblack through chemical etching and high-temperature calcination. It is indicated that Ketjenblack plays an important role in forming BN nanofibers with a diameter and length of around 10–30 nm and 5 μm, respectively. As supported by various characterization results, sulfur is not only anchored onto the surface of BN nanofibers and Ketjenblack through S–O–B and S–O–C interactions but also infiltrated into the micro-/mesopores of BN-Ketjenblack-xKOH substrates. The BN nanofibers act as not only S and polysulfide adsorbents but also as catalysts of the lithiation/delithiation process. The lithium–sulfur batteries with the cathode deliver a first discharge capacity of 1822.5 mAh g–1 at 0.1 C, which is higher than the theoretical capacity (1675 mAh g–1) of sulfur caused by the adsorption and catalysis of BN, and an enlarged interlayer distance of graphene. Meanwhile, it also delivers an initial capacity of 1150.9 mAh g–1 and a high capacity retention of 51.6% after 1000 charge/discharge cycles at 2 C. This work provides a methodology for preparing a cathode material for multifunctional lithium–sulfur batteries with enhanced electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01888?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01888</a>.Additional figures containing SEM, EDS analysis, AFM images, PXRD data, TG curves, nitrogen adsorption/desorption measurement, CV curves, and galvanostatic charge–discharge and cycling performance for various samples (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01888/suppl_file/ae0c01888_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boron-doped Ketjenblack Based High Performances Cathode for Rechargeable Li–O2 Batteries

Enhanced electrocatalytic performance of Co 3 O 4 /Ketjen-black cathodes for Li–O 2 batteries

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Bi2S3/Ketjen Black As a Highly Efficient Bifunctional Catalyst for Long‐Cycle Lithium‐Oxygen Batteries

Highly Catalytic Boron Nitride Nanofiber In Situ Grown on Pretreated Ketjenblack as a Cathode for Enhanced Performance of Lithium–Sulfur Batteries

Boron-doped Carbon Microspheres As a New Catalyst for Rechargeable Li-CO2 Batteries

Preparation of NiO/multiwalled Carbon Nanotube Nanocomposite for Use As the Oxygen Cathode Catalyst in Rechargeable Li–O 2 Batteries

A Novel Boron-doping Approach for Long-term Cycling Life of Li-rich Layered Cathode

Size‐Controlled Boron‐Based Bifunctional Photocathodes for High‐Efficiency Photo‐Assisted Li–O2 Batteries

Carbon Cathodes in Rechargeable Lithium-Oxygen Batteries Based on Double-Lithium-Salt Electrolytes

Controllable Electrochemical Fabrication of KO2-Decorated Binder-Free Cathodes for Rechargeable Lithium Oxygen Batteries

Ketjenblack Carbon Supported Amorphous Manganese Oxides Nanowires As Highly Efficient Electrocatalyst for Oxygen Reduction Reaction in Alkaline Solutions

Boron-Doped Pine-Cone Carbon With 3D Interconnected Porosity for Use as an Anode for Potassium-Ion Batteries With Long Life Cycle

Ultrathin Porous NiCo2O4 Nanosheets for Lithium–Oxygen Batteries: an Excellent Performance Deriving from an Enhanced Solution Mechanism

Biomass Template Derived Boron/Oxygen Co‐Doped Carbon Particles as Advanced Anodes for Potassium‐Ion Batteries

A Novel Co(phen) 2 /C Catalyst for the Oxygen Electrode in Rechargeable Lithium Air Batteries

A High-Capacity Cathode for Rechargeable K-metal Battery Based on Reversible Superoxide-Peroxide Conversion

N-doped porous carbon nanofibers inlaid with hollow Co3O4 nanoparticles as an efficient bifunctional catalyst for rechargeable Li-O2 batteries

PEG-assisted hydrothermal synthesis and electrochemical performance of ZnO/Ketjenblack nanocomposite for lithium ion batteries

Facile synthesis, structure and electrochemical performance of RbV3O8/ketjenblack as cathode material for lithium-ion batteries

Flower-like Cu0.18V2O5⋅0.72H2O/Ketjen Black Composite As High Performance Cathode Material for Sodium-Ion Batteries