Abstract:High temperature titanium alloys are being urgently developed owing to the requirements of advanced aerospace industry. Performance of the alloys in service under high-temperature environments always attracts great attention. In this study, variations of microstructure and mechanical property in TC25 (Ti-6.5Al-2Mo-1Zr-1Sn-1 W-0.2Si) dual-phase high temperature titanium alloy subjected to thermal exposure have been systematically investigated by coupling microstructural characterization, compositional analyses and mechanical measurement. It is found that strength is significantly enhanced while ductility is sharply degraded when the alloy is thermally exposed at 550 degrees C for a long duration of 100 h. Microstructural observations manifest that ternary alpha-needles (alpha t) are drastically precipitated from beta-ligaments inside transformed beta-matrix (beta trans) whilst alpha 2 (Ti3Al)-phase is produced from primary alpha-phase (alpha p) through ordered transformation. The precipitation of alpha t-needles is promoted by beta-phase metastability resulting from insufficient element partitioning in the initial microstructure. The beta-phase stability also renders alpha t-precipitation encounter size effect of beta-ligaments, where the precipitation is suppressed when beta-ligaments are thin in size. Both precipitation of alpha t-needles and alpha 2-phase triggers precipitation-hardening effect, which results in strain localization and thereby regresses alloy ductility. However, further analysis indicates that compared with alpha 2-phase, alpha t-precipitation plays more adverse role in embrittlement in the current alloy. This is different from thermal-exposed behavior of most of high temperature titanium alloys reported in literatures. These findings enrich our fundamental understanding on thermal stability of high temperature titanium alloys, and provide plausible implication to improve high temperature performance via controlling phase precipitation.

On the Tensile Embrittlement of Lamellar Ti–5Al–5V–5Mo–3Cr Alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Study of tensile properties and fracture mechanisms of fully lamellar TiAl based alloy

In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition

Tuning the Morphology of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy: from Brittle to Ductile Fracture

Tensile Brittleness and Ductility Improvement in a Novel Metastable Β Titanium Alloy with Lamella Structure

An Investigation on Microstructure Evolution and Deformation Mechanism of Ti–5Al–5Mo–5V–1Cr–1Fe Alloy During In-Situ Tensile

Study of Tensile Fracture Mechanisms of Bi-Morphic Alloys Γ-Tial at Room Temperature

Microstructure Evolution and Mechanical Behavior of Laser Melting Deposited TA15 Alloy at 500 °C under In-Situ Tension in SEM

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Microstructural Evolution and Slip During Yielding in Ti‐5Al‐5V‐2Mo‐2Cr Alloy

Deformation Mechanisms in a Β-Quenched Ti-5321 Alloy: In-situ Investigation Related to Slip Activity, Orientation Evolution and Stress Induced Martensite

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Mechanical Properties and Deformation Mechanisms in Microscale Ti-55531 Alloy

Precipitation Behavior and Tensile Property of the Stress-Aged Ti–10Mo–8V–1Fe–3.5Al Alloy

Tensile performance and impact toughness of Ti-55531 alloy with multilevel lamellar microstructure

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure

Effect of Microstructure on Impact Fracture Mechanism of a High-Strength Ti-5Al-7.5V-0.5Si-0.25Fe-0.2O Alloy

In-Situ SEM Observation on Fracture Behavior of Titanium Alloys with Different Slow-Diffusing β Stabilizing Elements