Abstract:The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable will be segmented in 3 parts along the route, cable A, cable B and cable C, connected by a set of multi-fiber connectors. The company USCONEC produces the multi-fiber connector under study. The USCONEC 32F model can connect 32 optical fibers in a 4 x 8 matrix arrangement. The ferrules are made of a durable composite, Polyphenylene Sulfide (PPS) based thermoplastic. The connections are held in place by a push-on/pull-off latch, and the connector can also be distinguished by a pair of metal guide pins that protrude from the front of the connector. Two fibers per connector will be used for monitoring the connection procedure. It was found to be easy to polish and it is small enough to be mounted in groups. Highly multiplexed instruments like PFS require a fiber connector system that can deliver excellent optical performance and reliability. PFS requires two different types of structures to organize the connectors. The Tower Connector system, with 80 multi-fiber connectors, will be a group of connectors for connecting cable B (Telescope Structure) with cable C (Positioners Plate). The Gang Connector system is a group of 8 gang connectors, each one with 12 multi-fibers connectors, for connecting cable B (Telescope Structure) with cable A (Spectrograph). The bench tests with these connector systems and the chosen fibers should measure the throughput of light and the stability after many connections and disconnections. In this paper we describe tests and procedures to evaluate the throughput and FRD increment. The lifetime of the ferrules is also in evaluation.

One Controlling and Driving Module Based on Fpga in Optical Fiber Positioning Device

Digitalization optical open loop test system for fiber optic gyroscope

Embedded Design on Optical Coherence Tomography Control System

A Multiplexing Fiber Optic Gyro

Fiber loop controller and application in optical OFDM transmission system

Technology research and performance analysis of optical interconnection network based on FPGA

Single-mode Fiber Auto-Coupling System with Wedges

Design of Multi-serial Communication for Flight Controlling Computer Based on FPGA

A Back-End Electronics Based on Fiber Communication for Small to Medium-Scale Physics Experiments

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

FPGA-based CCD signal acquisition and transmission system design

Developing Micro DC-Brushless Motor Driver and Position Control for Fiber Positioners

Low-crosstalk Laser-Direct-writing FI/FO Device for 8×100-Gbps Optical Interconnection

Multifunctional switching unit for add/drop, wavelength conversion, format conversion, and WDM multicast based on bidirectional LCoS and SOA-loop architecture.

A multi-functional fiber positioning system for Extremely Large Telescopes

Multi-fibers connectors systems for FOCCoS-PFS-Subaru

Net 8×250 Gbit/s/λ PAM6/8 Optical Interconnect Over High-Density Eight-Core Fiber and Low-Crosstalk Laser Direct Writing FI/FO Devices

Adaptive beamforming for optical wireless communication via fiber modal control

Enabling a multifunctional telecommunications fiber optic network: Ultrastable optical frequency transfer and attosecond timing in deployed multicore fiber

DSP and FPGA -Based Multi-Channel Fiber-Optic Spectrometer

FOCCoS for Subaru PFS