A single CuO/Cu2O/Cu micro-wire covered by a nano-wire network as gas sensor for the detection of battery hazards.
F. Faupel,L. Chow,H. Krüger,N. Ababii,L. Kienle,O. Lupan,A. Mishra,U. Schürmann,A. Vahl,R. Adelung,N. D. de Leeuw,V. Duppel,O. Gronenberg,S. Hansen
DOI: https://doi.org/10.1021/acsami.0c09879
2020-08-19
Abstract:In this study, a strategy to prepare CuO/Cu2O/Cu microwires which is fully covered by a nanowire network using a simple thermal oxidation process is developed. The CuO/Cu2O/Cu-microwires are fixed on Au/Cr pads with Cu microparticles. After thermal annealing at 425 °C, these CuO/Cu2O/Cu microwires are used as room-temperature 2-propanol sensors. These sensors show different dominating gas responses with operating temperatures, for example, higher sensitivity to ethanol at 175 oC, higher sensitivity to 2-propanol at room temperature and 225 oC, and higher sensitivity to hydrogen gas at ~ 300 oC, respectively. In this context, we propose the sensing mechanism of this 3-in-1 sensor based on CuO/Cu2O/Cu. XRD studies reveal that the annealing time during oxidation affects the chemical appearance of the sensor, while the intensity of reflections proves that for samples oxidized at 425 ºC for 1 h the dominating phase is Cu2O, whereas upon further rising the annealing duration up to 5 h, the CuO phase becomes dominant. The crystal structure of the Cu2O-shell/Cu-core and the CuO-NWs networks on the surface were confirmed with TEM, HRTEM, and SAED, where (HR)TEM micrographs reveal the monoclinic CuO phase. DFT calculations brings valuable inputs to the interactions of the different gas molecules with the most stable topsurface of CuO, revealing strong binding, electronic band gap changes and charge transfer dueto the gas molecule interactions with the topsurface. This research shows the importance of the non-planar CuO/Cu2O layered hetero-structure as a bright nanomaterial for the detection of various gases, controlled by the working temperature, and the insight presented here will be of significant value in the fabrication of new p-type sensing devices through simple nanotechnology.
Medicine,Engineering,Materials Science,Chemistry