Temperature compensation high strain measure ment based on a Fabry-Perot interferometer with the virtual-assisted Vernier effect
Tongqun Zhang,Xiaozhong Tian,Kang Xie,Minghong Wang,Jintao Wu,Dianguo Ma,Yunqun Sun,Xueqin Wang,Junbao Wang,Yanbin Zheng,minghong wang,Yunquan Sun
DOI: https://doi.org/10.1364/ao.517225
IF: 1.9
2024-03-25
Applied Optics
Abstract:A highly sensitive optical fiber Fabry–Perot interferometer (FPI) for strain measurement with temperature compensation is proposed. Instead of using another actual reference interferometer, a virtual FPI is constructed to superpose with the sensing FPI to form the Vernier effect. The fundamental and the first-order harmonic Vernier effect are generated to increase the sensitivity by adjusting the parameter of the virtual FPI. In order to separate the strain from the environment temperature, an FBG is cascaded to distinguish the applied temperature. Experimental results demonstrate that, with the help of the fundamental Vernier effect, the sensitivity and temperature of the FPI increases from 1.05 pm/°C to 10.63 pm/°C in the temperature range of 40-120°C, and the sensitivity of strain increases from 2.635 pm/µε to 33.11 pm/µε in the strain range of 0-400 µε. In order to access the tracking points more easily and further enhance the sensitivities, the first-order harmonic Vernier effect is generated by modifying the virtual FPI. Results show that the temperature and strain sensitivities are 21.25 pm/°C and 62.25 pm/µε, respectively. In addition, with the help of the FBG, the strain can be separated from the temperature by solving the cross-sensitivity matrix.
optics