Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement
Bolin Hu,Qingguo Lin,Ting Li,Weifeng Li,Haifeng Liu,Fuchen Wang
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.126387
IF: 5.2
2024-11-05
International Journal of Heat and Mass Transfer
Abstract:In this study, the flow behavior and heat transfer characteristics of the liquid film on the hot wall by inclined jet impingement are experimentally studied in detail. The effects of jet parameters, such as jet inclination angle, impingement distance, jet Reynolds number ( Re j ), and nozzle diameter are explored. The liquid film flow is visualized using a high-speed camera, and the surface temperature and heat flux are obtained by solving the inverse heat conduction problem. The results indicate that the liquid film shape is strongly affected by jet inclination angle but is almost unaffected by other parameters. As the inclination angle increases, the liquid film shape changes from elliptical to fusiform. In addition, the onset, enhancement, and disappearance of boiling cause the expansion and contraction of liquid film. The splashing rate is barely affected by jet parameters and remains within the range of 80–95 % under all conditions. The propagation of wetting fronts exhibits anisotropy. Except for the impingement distance, the position of wetting fronts along y -axis direction displays a high dependence on all parameters. The Re j and nozzle diameter have a significant effect on the heat flux at the impingement point and parallel flow zone, while the jet inclination angle and impingement distance only effect the impingement point. The visualization image proves that the droplet impingement pattern is the main reason for the increase in heat flux at higher impingement distances. Optimizing jet parameters can promote the wall to enter the rapid cooling stage in advance and increase maximum heat flux, thereby improving the maximum cooling capacity of the jet. Finally, an empirical equation is proposed to predict the maximum Nusselt number.
engineering, mechanical,thermodynamics,mechanics