Abstract:As HDS catalysts, the supported catalysts including oxide state Mo, Co–Mo and sulfide state Mo on carbon nanotube (CNT) were prepared, while the corresponding supported catalysts on γ-Al2O3 were prepared as comparison. Firstly, the dispersion of the active phase and loading capacity of Mo species on CNT was studied by XRD and the reducibility properties of Co–Mo catalysts in oxide state over CNTs were investigated by TPR while the sulfide Co–Mo/CNT catalysts were characterized by XRD and LRS techniques. Secondly, the activity and selectivity of hydrodesulfurization (HDS) of dibenzothiophene with Co–Mo/CNT and Co–Mo/γ-Al2O3 were studied. It has been found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, rather than MoO3 as generally expected. The maximum loading before formation of the bulk phase was lower than 6%m (calculated in MoO3). The TPR studies revealed that that active species in oxide state Co–Mo/CNT catalysts were more easily reduced at relatively lower temperatures in comparison to those in Co–Mo/γ-Al2O3, indicating that the CNT support promoted the reduction of active species. Among 0–1.0 Co/Mo atomic ratio on Co–Mo/CNT, 0.7 has the highest reducibility. It shows that the Co/Mo atomic ratio has a great effect on the reducibility of active species on CNT and their HDS activities and that the incorporation of cobalt improved the dispersion of molybdenum species on CNT and mobilization. It was also found that re-dispersion could occur during the sulfiding process, resulting in low valence state Mo3S4 and Co–MoS2.17 active phases. The HDS of DBT showed that Co–Mo/CNT catalysts were more active than Co–Mo/γ-Al2O3 and the hydrogenolysis/hydrogenation selectivity of Co–Mo/CNT catalyst was also much higher than Co–Mo/γ-Al2O3. For the Co–Mo/CNT catalysis system, the catalyst with Co/Mo atomic ratio of 0.7 showed the highest activity, whereas, the catalyst with Co/Mo atomic ratio of 0.35 was of the highest selectivity.

Preparation and Characterization of CNT-supported Cobalt Catalysts for 1-Octene Hydroformylation

Pt3Co Octapods As Superior Catalysts of CO2 Hydrogenation

Theoretical insights into the catalytic mechanism of propylene hydroformylation over Co-N-C materials

Co-Co2c and Co-Co2c/Ac Catalysts for Hydroformylation of 1-Hexene under Low Pressure: Experimental and Theoretical Studies

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

Effect of Reaction Conditions on Hydroformylation of Mixed Octenes Catalyzed by Co Catalyst

Hydroformylation of 1-Hexene over Ultrafine Cobalt Nanoparticle Catalysts

Efficient Interfacial Sites between Metallic and Oxidized Cobalt for Propene Hydroformylation

Highly Efficient and Chemoselective Tandem Hydroformylation‐Hydrogenation of Alkenes to Alcohols over g‐CN Supported Bimetallic Rh and Co Nanoparticles Catalysts

Efficient and Stable Co/β-Mo 2 C Catalyst for Hydroformylation

Catalytic Performance Of Cobalt Catalyst And Effect Of Reaction Conditions In Hydroformylation Of Mixed C8 Olefins.

Selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with carbon nanotubes supported Pt-Co catalysts

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Combination-type MgO/CNTs Composites As Effective Supports for CO Hydrogenation to Light Olifin

States of Carbon Nanotube Supported Mo-Based HDS Catalysts

Nanopowder-Supported Ultra-Low Content Co–Rh Bimetallic Catalysts for Hydroformylation of Monoformyltricyclodecenes to Value-Added Fine Chemicals

Reduced graphene oxide supported cobalt catalysts for ethylene hydroformylation: Modified cobalt-support interaction by rhodium

Carbon nanofibers supported molybdenum carbide catalysts for hydrodeoxygenation of vegetable oils

Cobaltous Oxide Supported on MFI Zeolite As an Efficient Ethane Dehydrogenation Catalyst

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Effect of pH, Acid and Thermal Treatment Conditions on Co/CNT Catalyst Performance in Fischer-Tropsch Reaction