Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

Effect of Reaction Conditions on Hydroformylation of Mixed Octenes Catalyzed by Co Catalyst

Catalytic Performance Of Cobalt Catalyst And Effect Of Reaction Conditions In Hydroformylation Of Mixed C8 Olefins.

Catalytic Transfer Hydrogenation Of Oleic Acid To Octadecanol Over Magnetic Recoverable Cobalt Catalysts

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Hydroformylation of mixed octenes over immobilized Co-Ph<sub>3</sub>PO/PDMS/SiO<sub>2</sub> catalyst

Co-Co2c and Co-Co2c/Ac Catalysts for Hydroformylation of 1-Hexene under Low Pressure: Experimental and Theoretical Studies

Hydroformylation of mixed octenes over immobilized Co-Ph 3 PO/PDMS/SiO 2 catalyst

Mechanistic Insights into Hydroformylation Catalyzed by Cationic Cobalt(II) Complexes: in Silico Modification of the Catalyst System

Efficient Interfacial Sites between Metallic and Oxidized Cobalt for Propene Hydroformylation

Efficient and Stable Co/β-Mo 2 C Catalyst for Hydroformylation

K-promoted Cobalt-based Catalysts for Heterogeneous Hydroformylation

Studies on Hydroformylation of Mixed C8 Oiefins

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

CO2 Hydrogenation over Unsupported Fe-Co Nanoalloy Catalysts

Catalytic Behaviors of Amorphous Co-B Catalysts in Hydroformylation of 1-Octene

Insights into the Bimetallic Effects of a RhCo Catalyst for Ethene Hydroformylation: Experimental and DFT Investigations

Hydroformylation of 1-octene over Rh/P catalysts

Fabrication of Co/HMS catalyst by modulating the hydrothermal time for the oxidative dehydrogenation of C 2 H 6 with CO 2 to C 2 H 4

Theoretical insights into the catalytic mechanism of propylene hydroformylation over Co-N-C materials

In Situ FTIR Study of Low-Pressure Hydroformylation of 1-Hexene Catalyzed by Ultrafine Cobalt Nanoparticles

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation