Abstract:As resist films become thinner, so as to reduce problems of aspect ratio related pattern collapse at high-resolution, it is becoming increasingly difficult to transfer patterns with useful aspect ratio by directly etching the resist. It has become common to use the photoresist to pattern an intermediate hardmask, which then protects the silicon substrate during etching, allowing useful aspect ratios but adding process complexity. We have previously described a fullerene based electron beam lithography resist capable of 20 nm halfpitch and 12 nm sparse features, at a sensitivity of less than 10 μC/cm2 at 20 keV. The fullerene resist has high etch durability - comparable to that of commercial novolac resists - and has previously demonstrated an etch selectivity of 3:1 to silicon using electron cyclotron resonance microwave plasma etching with SF6. Here a study of the capabilities of this resist when using Inductively Coupled Plasma etching is presented. Line-space patterns with half-pitches in the range 25 nm to 100 nm, together with sparse features (~20 nm linewidth on a 200 nm pitch) were produced in ~30 nm thick resist films using electron beam lithography, and transferred to silicon using an inductively coupled plasma etcher. Several combinations of SF6, CF4, CHF3 and C4F8process gases were explored. Etch selectivity and anisotropy were studied as a range of etching parameters, such as ICP and RF power, gas flow rate, pressure and temperature were varied. Etch selectivities in excess of 9:1 were demonstrated. Techniques for minimizing aspect ratio dependent etching effects in dense features, including the use of ashing or high etching pressures were also examined.

Organic Hard Masks Utilizing Fullerene Derivatives

Spin-On-Carbon Hardmask Based on Fullerene Derivatives for High-Aspect Ratio Etching

Fullerene-based Spin-on-carbon Hardmask

Chemically Amplified Fullerene Resists, Spin-on Fullerene Hardmasks and High Aspect Ratio Etching

Fullerene Derivatives as Novel Resist Materials for Fabrication of MEMS Devices by Electron Beam Lithography

A Fullerene Derivative As an Electron Beam Resist for Nanolithography

Functionalization of Fullerene for Electron Beam Nanolithography Resist.

A High Resolution Water Soluble Fullerene Molecular Resist for Electron Beam Lithography

Spin-On Carbon Using Fullerene Derivatives

Systematic Studies of Fullerene Derivative Electron Beam Resists

Ultrathin Fullerene Films As High-Resolution Molecular Resists for Low-Voltage Electron-Beam Lithography.

Plasma Etching of High-Resolution Features in A Fullerene Molecular Resist

Fullerene Resist Materials for the 32 Nm Node and Beyond

Low Activation Energy Fullerene Molecular Resist

Narrow-gap, Semiconducting, Superhard Amorphous Carbon with High Toughness, Derived from C60 Fullerene

A Chemically Amplified Fullerene-Derivative Molecular Electron-Beam Resist

Hrem and Eels Analysis of Fullerene-Like Carbon Films

Exposure mechanism of fullerene derivative electron beam resists

Chemically Amplified Fullerene Resists for E-Beam Lithography

Hard Elastic Carbon Thin Films from Linking of Carbon Nanoparticles

Langmuir-Blodgett films of fullerene derivatives