Abstract:A series of polyethylene (PE) blends consisting of a linear high density polyethylene (HDPE) and a linear low density polyethylene (LLDPE) with an octane-chain branch density of 120/1000 carbon was prepared at different concentrations. The two components of this set of blends possessed isorefractive indices, thus, making it difficult to detect their liquid–liquid phase separation via scattering techniques. Above the experimentally observed melting temperature of HDPE, Tm = 133 °C, this series of blends can be considered to be in the liquid state. The LLDPE crystallization temperature was below 50 °C; therefore, above 80 °C and below the melting temperature of HDPE, a series of crystalline–amorphous PE blends could be created. A specifically designed two-step isothermal experimental procedure was utilized to monitor the liquid–liquid phase separation of this set of blends. The first step was to quench the system from temperatures of known miscibility and isothermally anneal them at a temperature higher than the equilibrium melting temperature of the HDPE for the purpose of allowing the phase morphology to develop from liquid–liquid phase separation. The second step was to quench the system to a temperature at which the HDPE could rapidly crystallize. The time for developing 50% of the total crystallinity (t1/2) was used to monitor the crystallization kinetics. Because phase separation results in HDPE-rich domains where the crystallization rates are increased, this technique provided an experimental measure to identify the binodal curve of the liquid–liquid phase separation for the system indicated by faster t1/2. The annealing temperature in the first step that exhibits an onset of the decrease in t1/2 is the temperature of the binodal point for that blend composition. In addition, the HDPE-rich domains crystallized to form spherulites which decorate the phase-separated morphology. Therefore, the crystal dispersion indicates whether the phase separation followed a nucleation-and-growth process or a spinodal decomposition process. These crystal-decorated morphologies enabled the spinodal curve to be experimentally determined for the first time in this set of blends.

Liquid–liquid phase separation and its effect on the crystallization in polylactic acid/poly(ethylene glycol) blends

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Study on Liquid-Liquid Phase-Separation and Its Effect on the Crystallization Kinetics of Blends Composed of Isotactic Polypropylene/Ethylene-Propylene Rubber

The effect of phase separation on crystallization of polyethylene/poly(ethylene-alt-propylene) blend

Interplay Between Two Phase Transitions: Crystallization and Liquid-Liquid Phase Separation in a Polyolefin Blend

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

Crystallization and phase separation kinetics in blends of linear low-density polyethylene copolymers

Significant Enhancement of Crystallization Kinetics of Polylactide in Its Immiscible Blends Through an Interfacial Effect from Comb-Like Grafted Side Chains

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Liquid–liquid Phase Separation in a Polyethylene Blend Monitored by Crystallization Kinetics and Crystal-Decorated Phase Morphologies

Effect of Miscibility on Spherulitic Growth Rate for Double-Layer Polymer Films

Acceleration or Retardation to Crystallization if Liquid–liquid Phase Separation Occurs: Studies on a Polyolefin Blend by SAXS/WAXD, DSC and TEM

Interplay of Crystallization and Liquid–liquid Phase Separation in Polyolefin Blends: A Thermal History Dependence Study

Relationship Between the Crystallization Behavior of Poly(ethylene Glycol) and Stereocomplex Crystallization of Poly(l‐lactic Acid)/poly(d‐lactic Acid)

Two-Stage Crystallization Kinetics and Morphological Evolution with Stereocomplex Crystallite-Induced Enhancement for Long-Chain Branched Polylactide/Poly(D-lactic Acid) Blends

Experimental evidence for immiscibility of enantiomeric polymers: Phase separation of high-molecular-weight poly(ʟ-lactide)/poly(ᴅ-lactide) blends and its impact on hindering stereocomplex crystallization

Polymorphic Crystallization and Crystalline Reorganization of Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Mixture Influenced by Blending with Poly(vinylidene fluoride)

Thermal properties and miscibility of semi‐crystalline and amorphous PLA blends

Molecular Self-Assembly Assisted Liquid-Liquid Phase Separation In Ultrahigh Molecular Weight Polyethylene/Liquid Paraffin/Dibenzylidene Sorbitol Ternary Blends