Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

Computing Critical Speeds for Multiple-stage Centrifugal Pumps with Dependent Support Properties

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Lubrication and stability analysis of nonlinear rotor-bearing system

Analysis on Modeling Rotor System with Sidling Bearing and Ring Seal by Using FEM

Computation of Stress Distribution in a Mixed Flow Pump Based on Fluid-Structure Interaction Analysis

Mechanics mode characteristics analysis and numerical analytical optimization study of a three-stage centrifugal pump

Dynamic Analysis of a Planar Multi-Stage Centrifugal Pump Rotor System Based on a Novel Coupled Model

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Rotor dynamics analysis on high-power high-pressure multi-stage centrifugal pump

Numerical Investigation and Experiment on Natural Circulation Resistance and Energy Characteristics in a Circulating Axial Pump

Stability Analysis on the Journal Bearing in High Pressure Centrifugal Pump

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Calculation on Dynamic Coefficients of Multistage Pump's Journal Bearings

Numerical Analysis of Rotor Dynamics of Dredge Pump Shafting

Study on the Flow Stability and Dynamic Characteristics of a Water Bearing

Influence of the Lateral Joint Stiffness Between the Shaft and Bearing on Centrifuge Stability

Numerical investigation of performance characteristics in a bearingless direct-drive centrifugal pump under extreme operating conditions

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

Vibration and Stability Analyses of Rotor–bearing-Casing System in an Axial Piston Pump Subjected to Bearing Faults

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing