Abstract:High brittleness is the prerequisite for the creation of a hydraulic fracture network, which is crucial for shale reservoir development. The test evaluation methods are restricted in the field by lack of continuous brittleness profiles. Mineralogical evaluation cannot incorporate the external factors like stress state. The most widely used method is mechanical evaluation method based on statistical results of Young's modulus and Poisson's ratio. This method cannot explain the brittle tensile failure mechanism of shale and contradiction between high brittleness and barriers of high strength rock. With these methods, brittle evaluation and interval selection errors will happen in the application. Starting from the mechanism of rock failure and considering the effect of rock mechanical properties on brittleness, a new method for rock brittleness evaluation has been established. Firstly, the failure surface features were analyzed and the dominant mechanisms in complex failure were identified with triaxial test and scanning electron microscopy test. Secondly, a stress model for shale reservoirs with thin sand and shale interbedded was set up based on elasticity and the factors affecting the stress distribution and failure modes have been analyzed. Eventually, based on experiments and theoretical recognition, the brittleness index for shale was proposed by integrating Young's modulus, Poisson's ratio and fracture toughness. Moreover, a method for acquiring brittleness index from well logs was developed from which brittleness profiles for shale formations in Sichuan basin were obtained. Failure features analysis demonstrates that tensile failure dominates during rock brittle failure. It was observed that compression stress on rock is only relevant to mechanical parameters and independent of space location under both internal and external stresses. Finally, comparison with the results from Rickman's method and microseismic monitoring demonstrates that the method developed in this work possesses more satisfactory results of brittleness evaluation and interval selection in field application.

Application of Hoek-Brown criterion in rock compressive strength logging interpretation

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Assessment of engineering properties for marine and lacustrine soft soil in Hangzhou

Estimating the geological strength index and disturbance factor in the Hoek–Brown criterion using the acoustic wave velocity in the rock mass

APPLICATION OF PROGRESSIVELY CHANGING ROCK MASS DEFORMATION PARAMETERS TO ROCK MASS ENGINEERING

A New Method for Predicting Residual Strength of Rock in Water Diversion Tunnel Using Drilling Process Monitoring

Modified minimum principal stress estimation formula based on Hoek-Brown criterion and equivalent Mohr-Coulomb strength parameters

Correlation Between the Constant mi of Hoek–Brown Criterion and Porosity of Intact Rock

Experimental study on mechanical properties of shale rock and its strength criterion

Calculation for 3D Rock Mechanics Parameters

Modelling igneous rock mechanics parameter based on logging data in Shunbei oil field

A Novel Numerical-Iterative-approach for Strain-Softening Surrounding Rock Incorporating Rockbolts Effectiveness and Hydraulic-Mechanical Coupling Based on Three-Dimensional Hoek-Brown Strength Criterion

A strength criterion for rocks

A new three-dimensional rock strength criterion based on shape function in deviatoric plane

Experimental study on predicting rock properties using sound level characteristics along the borehole during drilling

Correlation between the tensile to compressive strength ratio and mechanical parameters of rock based on a nonlinear M-C criterion

A New Version of the Generalized Zhang–Zhu Strength Criterion and a Discussion on Its Smoothness and Convexity

Study of slope stability analysis method based on equivalent Mohr‐Coulomb strength parameters of three‐dimensional stress state

Study on Mechanical Properties and Nonlinear Strength Model of Deep Water-Sensitive Rock in Xianglu Mountain Tunnel

A New Method for Shale Brittleness Evaluation

Comparison and analysis for prediction accuracy of true triaxial rock strength criterion