Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Model-Based Fault Diagnosis Approach for Rotor System with Unidentified Supporting Parameters

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Probabilistic Model-Based Fault Diagnosis Of The Rotor System

Fault Diagnosis for Rotor Based on Multi-Sensor Information and Progressive Strategies

Fault Identification of Rotor Machine Based on Optimized Method

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Bayesian model-based fault diagnosis for the rotor

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Application of Multiple-Model Estimation Method to Rotor Fault Diagnosis

Efficient fault identification method for dual rotor-supporting system using model-based method

Bayesian model‐based fault diagnosis for the rotor

Hybrid Model Based Identification of Local Rubbing Fault in Rotor Systems

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

A fault diagnosis method for rotating machinery based on improved variational mode decomposition and a hybrid artificial sheep algorithm

Increasing Interpretability and Feasibility of Data Driven-Based Unknown Fault Diagnosis in Permanent Magnet Synchronous Motors

A time-varying comprehensive dynamic model for the rotor system with multiple bearing faults

Multi-fault Diagnosis of Rotor System Based on Differential-Based Empirical Mode Decomposition

Fault Diagnosis of a Rotor-Bearing System Under Variable Rotating Speeds Using Two-Stage Parameter Transfer and Infrared Thermal Images

Research on the Rotor Fault Diagnosis Method Based on QPSO-VMD-PCA-SVM

Identification Of Multi-Concurrent Fault In A Steam Turbine Rotor System Using Model-Based Method

Modeling and simulation analysis of dual-rotor vibration system with multiple faults