Abstract:Developing high-performance materials from existing natural materials is highly desired because of their environmental friendliness and low cost; two-dimensional nanoclay exfoliated from layered silicate minerals is a good building block to construct multilayered macroscopic assemblies for achieving high mechanical and functional properties. Nevertheless, the efforts have been frustrated by insufficient inter-nanosheet stress transfer and nanosheet misalignment caused by capillary force during solution-based spontaneous assembly, degrading the mechanical strength of clay-based materials. Herein, a constrained assembly strategy that is implemented by in-plane stretching a robust water-containing nanoclay network with hydrogen and ionic bonding is developed to adjust the 2D topography of nanosheets within multilayered nanoclay film. In-plane stretching overcomes capillary force during water removal and thus restrains nanosheet conformation transition from nearly flat to wrinkled, leading to a highly aligned multilayered nanostructure with synergistic hydrogen and ionic bonding. It is proved that inter-nanosheet hydrogen and ionic bonding and nanosheet conformation extension generate profound mechanical reinforcement. The tensile strength and modulus of natural nanoclay film reach up to 429.0 MPa and 43.8 GPa and surpass the counterparts fabricated by normal spontaneous assembly. Additionally, improved heat insulation function and good nonflammability are shown for the natural nanoclay film and extend its potential for realistic uses.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c00023.Fabrication process of natural nanoclay film (Figure S1); exfoliation process and characterization of clay nanosheets (Figure S2); three-dimensional network of clay nanosheets bridged by SA-Ca2+ (Figure S3); tensile stress–strain curves of clay nanosheet network bridged by SA-Ca2+ (Figure S4); comparison of nanoclays with and without Ca2+ bridging (Figure S5); tensile stress–strain curves of plain nanoclay film with no bridging (Figure S6); comparison of fracture morphologies of nanoclay films with no bridging, SA bridging, and SA-Ca2+ bridging (Figure S7); tensile stress–strain curves of nanoclay films with SA bridging (Figure S8); tensile stress–strain curves of nanoclay films with SA-Ca2+ bridging (Figure S9); tensile stress–strain curves of nanoclay films with SA-metal cation bridging (Figure S10); surface SEM images and wrinkle length distributions for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S11); AFM images and height profiles for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S12); schematic for WAXS test (Figure S13); tensile stress–strain curves for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S14); isotropic tensile property of SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for 30% (Figure S15); TGA and EDX used for analyzing the content of SA and Ca2+ in SA30-Ca2+1.6-bridged nanoclay film (Figure S16); finite element simulated temperature evolution along film thickness direction (Figure S17); illustration of the setup for infrared thermal imaging of clay films (Figure S18); structure of nanoclay film after burning (Figure S19); nanosheet conformation, bridging agent, and mechanical property of multilayered nanoclay films fabricated by constrained assembly strategy via in-plane stretching(Table S1) (PDF)This article has not yet been cited by other publications.

Synthesis, Structural And Mechanical Characterization Of Artificial Nanocomposites

Nanoclay-reinforced Polyacrylamide Composite: Synthesis, Structural and Mechanical Characterization

Supramolecular Ionic Strength-Modulating Microstructures and Properties of Nacre-Like Biomimetic Nanocomposites Containing High Loading Clay

A Facile Approach to Prepare Self-Assembled, Nacre-Inspired Clay/Polymer Nano-Composites

Different-structured Nanoclays Incorporated Composites: Computational and Experimental Analysis on Mechanical Properties

Mechanical Properties and Fracture Performance of Nanoclay-reinforced Polypropylene Modified with Maleic Anhydride

Synthesis, Rheology, and Morphology of Nylon‐11/layered Silicate Nanocomposite

Nanoindentation and Morphological Studies of Epoxy Nanocomposites

Transparent and Flexible Nacre‐Like Hybrid Films of Aminoclays and Carboxylated Cellulose Nanofibrils

Polyacrylamide-clay Nacre-Like Nanocomposites Prepared by Electrophoretic Deposition

Microstructures Formed in Co-Cross-Linked Networks and Their Relationships to the Optical and Mechanical Properties of PNIPA/Clay Nanocomposite Gels

Characterization and modeling of mechanical behavior of polymer/clay nanocomposites

Preparation, Morphology and Thermal/mechanical Properties of Epoxy/nanoclay Composite

Insights into the thermomechanical and interfacial behaviors of polymer‐clay nanocomposites via coarse‐grained molecular dynamics simulations

Structural design of "straw and clay" based on cellulose nanofiber/polydopamine and its interfacial stress dissipation mechanisms

Probing Polymer Chain Constraint and Synergistic Effects in Nylon 6-Clay Nanocomposites and Nylon 6-Silica Flake Sub-Micro Composites with Nanomechanics

Hybrid Network Structure And Mechanical Properties Of Rodlike Silicate/Cyanate Ester Nanocomposites

A scalable hydrogel processing route to high-strength, foldable clay-based artificial nacre

A Constrained Assembly Strategy for High-Strength Natural Nanoclay Film

Highly Filled Bionanocomposites from Functionalized Polysaccharide Nanocrystals

Epoxy Nanocomposites with Highly Exfoliated Clay: Mechanical Properties and Fracture Mechanisms