Abstract:Developing high-performance materials from existing natural materials is highly desired because of their environmental friendliness and low cost; two-dimensional nanoclay exfoliated from layered silicate minerals is a good building block to construct multilayered macroscopic assemblies for achieving high mechanical and functional properties. Nevertheless, the efforts have been frustrated by insufficient inter-nanosheet stress transfer and nanosheet misalignment caused by capillary force during solution-based spontaneous assembly, degrading the mechanical strength of clay-based materials. Herein, a constrained assembly strategy that is implemented by in-plane stretching a robust water-containing nanoclay network with hydrogen and ionic bonding is developed to adjust the 2D topography of nanosheets within multilayered nanoclay film. In-plane stretching overcomes capillary force during water removal and thus restrains nanosheet conformation transition from nearly flat to wrinkled, leading to a highly aligned multilayered nanostructure with synergistic hydrogen and ionic bonding. It is proved that inter-nanosheet hydrogen and ionic bonding and nanosheet conformation extension generate profound mechanical reinforcement. The tensile strength and modulus of natural nanoclay film reach up to 429.0 MPa and 43.8 GPa and surpass the counterparts fabricated by normal spontaneous assembly. Additionally, improved heat insulation function and good nonflammability are shown for the natural nanoclay film and extend its potential for realistic uses.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c00023.Fabrication process of natural nanoclay film (Figure S1); exfoliation process and characterization of clay nanosheets (Figure S2); three-dimensional network of clay nanosheets bridged by SA-Ca2+ (Figure S3); tensile stress–strain curves of clay nanosheet network bridged by SA-Ca2+ (Figure S4); comparison of nanoclays with and without Ca2+ bridging (Figure S5); tensile stress–strain curves of plain nanoclay film with no bridging (Figure S6); comparison of fracture morphologies of nanoclay films with no bridging, SA bridging, and SA-Ca2+ bridging (Figure S7); tensile stress–strain curves of nanoclay films with SA bridging (Figure S8); tensile stress–strain curves of nanoclay films with SA-Ca2+ bridging (Figure S9); tensile stress–strain curves of nanoclay films with SA-metal cation bridging (Figure S10); surface SEM images and wrinkle length distributions for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S11); AFM images and height profiles for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S12); schematic for WAXS test (Figure S13); tensile stress–strain curves for SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for different ratios (Figure S14); isotropic tensile property of SA30-Ca2+1.6-bridged nanoclay film assembled by in-plane stretching for 30% (Figure S15); TGA and EDX used for analyzing the content of SA and Ca2+ in SA30-Ca2+1.6-bridged nanoclay film (Figure S16); finite element simulated temperature evolution along film thickness direction (Figure S17); illustration of the setup for infrared thermal imaging of clay films (Figure S18); structure of nanoclay film after burning (Figure S19); nanosheet conformation, bridging agent, and mechanical property of multilayered nanoclay films fabricated by constrained assembly strategy via in-plane stretching(Table S1) (PDF)This article has not yet been cited by other publications.

A Constrained Assembly Strategy for High-Strength Natural Nanoclay Film

Crystallization Behavior and Water Vapor Permeability of Poly(Lactic Acid) Nanocomposite under Oscillatory Shear

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

A Facile Approach to Prepare Self-Assembled, Nacre-Inspired Clay/Polymer Nano-Composites

From Cellulose Nanospheres, Nanorods to Nanofibers: Various Aspect Ratio Induced Nucleation/Reinforcing Effects on Polylactic Acid for Robust-Barrier Food Packaging

Micromechanical Properties of Nanostructured Clay-Oxide Multilayers Synthesized by Layer-By-Layer Self-Assembly

An asymmetric clay film for smart moisture actuators: Film actuation and characterization

Ionically Interacting Nanoclay and Nanofibrillated Cellulose Lead to Tough Bulk Nanocomposites in Compression by Forced Self-Assembly.

Multifunctional nanoclay hybrids of high toughness, thermal, and barrier performances

A Designed Multiscale Hierarchical Assembly Process to Produce Artificial Nacre-Like Freestanding Hybrid Films with Tunable Optical Properties

Synthesis of Nanostructured Nanoclay-Zirconia Multilayers: A Feasibility Study

Transparent, Heat-Resistant, Ductile, and Self-Reinforced Polylactide through Simultaneous Formation of Nanocrystals and an Oriented Amorphous Phase

Tubular Nanoclay-Enhanced Calcium Phosphate Mineralization and Assembly to Impart High Stiffness and Antimicrobial Properties

Insights into the thermomechanical and interfacial behaviors of polymer‐clay nanocomposites via coarse‐grained molecular dynamics simulations

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

Structural design of "straw and clay" based on cellulose nanofiber/polydopamine and its interfacial stress dissipation mechanisms

Bio-inspired nacre-like composites with excellent mechanical properties, gas-barrier function and fire-retardant performances based on self-assembly between hyperbranched poly(amido amine)s and montmorillonite

A Synergistic Interfacial and Topological Strategy for Reinforcing Aramid Nanofiber Films.

Highly Regular Layered Structure via Dual‐Spatially‐Confined Alignment of Nanosheets Enables High‐Performance Nanocomposites

Design and assembly of chain-oriented-crystalline multilayered composite with largely improved mechanical strength

Nanoclay protonation and silane functionalization to enhance mechanical and fracture performance of epoxy nanocomposites