Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Multifunctional nanoclay hybrids of high toughness, thermal, and barrier performances

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

The Morphology and Mechanical Properties of the Hybrid Films of Styrene-Butyl Acrylate Block Copolymer/Mmt from Colloid Blending

High strength, flexible and transparent nanofibrillated cellulose-nanoclay biohybrid films with tunable oxygen and water vapor permeability

Green nanocomposite films based on cellulose acetate and biopolymer-modified nanoclays: studies on morphology and properties

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Bio-inspired nacre-like composites with excellent mechanical properties, gas-barrier function and fire-retardant performances based on self-assembly between hyperbranched poly(amido amine)s and montmorillonite

A Facile Approach to Prepare Self-Assembled, Nacre-Inspired Clay/Polymer Nano-Composites

Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles

Transparent and Flexible Nacre‐Like Hybrid Films of Aminoclays and Carboxylated Cellulose Nanofibrils

Bio-inspired Clay Nanosheets/polymer Matrix/mineral Nanofibers Ternary Composite Films with Optimal Balance of Strength and Toughness

Effects of nanoclay on physical and dimensional stability of Bamboo/Kenaf/nanoclay reinforced epoxy hybrid nanocomposites

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

The effect of clay modification on the structure, dielectric behaviour and mechanical properties of PVDF/PMMA/CTAMag polymer nanocomposites as potential flexible performance materials

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

Morphology, Thermal and Mechanical Properties of Poly (Styrene-Acrylonitrile) (SAN)/Clay Nanocomposites from Organic-Modified Montmorillonite

Synthesis and characterization of novel SEBS-g-MA/OMMT nanocomposites with thermal and mechanical resilience

Morphology, Thermal Stability, and Flammability of Polymer Matrix Composites Coated with Hybrid Nanopapers

Morphology, thermal stability, and flammability of carbon nanofiber-clay based nanocomposites

Thermomechanical properties of multifunctional polymer hybrid nanocomposites based on carbon nanotubes and nanosilica

Physical and mechanical properties of hybrid montmorillonite/zinc oxide reinforced carboxymethyl cellulose nanocomposites