[Secondary biceps brachii muscle (M. biceps brachii secundarius)].

J. Jaśkowski

Folia Morphologica

Abstract:

What problem does this paper attempt to address?

Anisotropic, Transparent Films with Aligned Cellulose Nanofibers

Mingwei Zhu,Yilin Wang,Shuze Zhu,Lisha Xu,Chao Jia,Jiaqi Dai,Jianwei Song,Yonggang Yao,Yanbin Wang,Yongfeng Li,Doug Henderson,Wei Luo,Heng Li,Marilyn L. Minus,Teng Li,Liangbing Hu

DOI: https://doi.org/10.1002/adma.201606284

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Transparent films or substrates are ubiquitously used in photonics and optoelectronics, with glass and plastics as traditional choice of materials. Transparent films made of cellulose nanofibers are reported recently. However, all these films are isotropic in nature. This work, for the first time, reports a remarkably facile and effective approach to fabricating anisotropic transparent films directly from wood. The resulting films exhibit an array of exceptional optical and mechanical properties. The well‐aligned cellulose nanofibers in natural wood are maintained during delignification, leading to an anisotropic film with high transparency (≈90% transmittance) and huge intensity ratio of transmitted light up to 350%. The anisotropic film with well‐aligned cellulose nanofibers has a mechanical tensile strength of up to 350 MPa, nearly three times of that of a film with randomly distributed cellulose nanofibers. Atomistic mechanics modeling further reveals the dependence of the film mechanical properties on the alignment of cellulose nanofibers through the film thickness direction. This study also demonstrates guided liquid transport in a mesoporous, anisotropic wood film and its possible application in enabling new nanoelectronic devices. These unique and highly desirable properties of the anisotropic transparent film can potentially open up a range of green electronics and nanofluidics.
Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Sha Wang,Tian Li,Chaoji Chen,Weiqing Kong,Shuze Zhu,Jiaqi Dai,Alfredo J. Diaz,Emily Hitz,Santiago D. Solares,Teng Li,Liangbing Hu

DOI: https://doi.org/10.1002/adfm.201707491

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:Cellulose nanofibrils are attractive as building blocks for advanced photonic, optoelectronic, microfluidic, and bio-based devices ranging from transistors and solar cells to fluidic and biocompatible injectable devices. For the first time, an ultrastrong and ultratough cellulose film, which is composed of densely packed bacterial cellulose (BC) nanofibrils with hierarchical fibril alignments, is successfully demonstrated. The molecular level alignment stems from the intrinsic parallel orientation of crystalline cellulose molecules produced by Acetobacter xylinum. These aligned long-chain cellulose molecules form subfibrils with a diameter of 2-4 nm, which are further aligned to form nanofibril bundles. The BC film yields a record-high tensile strength (approximate to 1.0 GPa) and toughness (approximate to 25 MJ m(-3)). Being ultrastrong and ultratough, yet the BC film is also highly flexible and can be folded into desirable shapes. The BC film exhibits a controllable manner of alignment and is highly transparent with modulated optical properties, paving the way to enabling new functionalities in mechanical, electrical, fluidic, photonics, and biocompatible applications.
Promising nanocomposites for food packaging based on cellulose – PCL films reinforced by using ZnO nanoparticles in an ionic liquid

Elahe Amini,Cristina Valls,M. Blanca Roncero

DOI: https://doi.org/10.1016/j.indcrop.2023.116246

IF: 6.449

2023-01-12

Industrial Crops and Products

Abstract:The fact that most composites consist of polluting synthetic materials has prompted a search for biodegradable replacements based on cellulose fibers and polycaprolactone as potential packaging materials. In this work, we developed a green, efficient approach to rendering hydrophobic polycaprolactone (PCL) compatible with hydrophilic cellulose fibers by using an ionic liquid as a nanowelding agent in the presence of zinc oxide nanoparticles (ZnONPs). Transparent biobased nanocomposite films were thus directly obtained by in situ ring-opening polymerization (ROP) of ε -caprolactone (CL) monomers onto the dissolved cellulose matrix by using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). [EMIM]Ac and ZnONPs were efficiently catalyzed ε -caprolactone ROP under mild conditions. Cellulose-grafted PCL nanocomposite films were obtained by adding variable amounts of CL and ZnONPs to the cellulose matrix. The maximum grafting of 40% was achieved by using 5▒wt% ZnONPs and 70% CL. FTIR spectra confirmed the presence of PCL in the nanocomposites. Also, FE-SEM revealed uniform dispersion of ZnONPs and PCL in the regenerated cellulose matrix, and trapping of nanoparticles in nanofibrils after the cellulose matrix was regenerated. X-ray diffraction (XRD) spectra showed a decreased apparent crystallinity and crystallite size. The XRD results also confirmed that the crystal properties of the nanocomposite films and an all-cellulose composite (ACC) were almost identical. The mechanical, barrier and optical properties of the nanocomposite films were significantly better than those of the ACC film by effect of the incorporation of ZnONPs and PCL especially with 5▒wt% ZnONPs and 70% CL). The nanocomposite films exhibited acceptable antioxidant activity and UV-light barrier properties, so they hold promise for used in food packaging. Nanocomposite films are in fact multifunctional materials with the potential for use in cellulose-based food packaging by virtue of their being transparent and bio-based, and possessing very good water vapor and oxygen barrier properties.

agronomy,agricultural engineering
Problems of long-term spinal opioid treatment in advanced cancer patients

S. Mercadante

DOI: https://doi.org/10.1016/S0304-3959(98)00118-3

IF: 7.926

1999-01-01

Pain

Abstract:
Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Qian Ma,Ke Wang,Damian Mohawk,Yanlin Chen,Raj Hazra,Long Jiang

DOI: https://doi.org/10.1021/acssuschemeng.1c01222

2021-08-05

Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Transparent Cellulose Films with High Gas Barrier Properties Fabricated from Aqueous Alkali/Urea Solutions

Quanling Yang,Hayaka Fukuzumi,Tsuguyuki Saito,Akira Isogai,Lina Zhang

DOI: https://doi.org/10.1021/bm200766v

2011-06-21

Biomacromolecules

Abstract:Transparent and bendable regenerated cellulose films prepared from aqueous alkali (NaOH or LiOH)/urea (AU) solutions exhibit high oxygen barrier properties, which are superior to those of conventional cellophane, poly(vinylidene chloride), and poly(vinyl alcohol). Series of AU cellulose films are prepared from different cellulose sources (cotton linters, microcrystalline cellulose powder, and softwood bleached kraft pulp) for different dissolution and regeneration conditions. The oxygen permeabilities of these AU cellulose films vary widely from 0.003 to 0.03 mL μm m(-2) day(-1) kPa(-1) at 0% relative humidity depending on the conditions used to prepare the films. The lowest oxygen permeability is achieved for the AU film prepared from 6 wt % cellulose solution by regeneration with acetone at 0 °C. The oxygen permeabilities of the AU cellulose films are negatively correlated with their densities, and AU films prepared from solutions with high cellulose concentrations by regeneration in a solvent at low temperatures generally have low oxygen permeabilities. The AU cellulose films are, therefore, promising biobased packaging materials with high-oxygen barrier properties.

polymer science,biochemistry & molecular biology,chemistry, organic
Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

Fang Li,Hou-Yong Yu,Yan-Yan Wang,Ying Zhou,Heng Zhang,Ju-Ming Yao,Somia Yassin Hussain Abdalkarim,Kam Chiu Tam

DOI: https://doi.org/10.1021/acs.jafc.9b03110

IF: 6.1

2019-01-01

Journal of Agricultural and Food Chemistry

Abstract:High-performance and useful graphene oxide (GO) and cellulose nanocrystals (CNCs) are easily extracted from natural graphite and cellulose raw materials, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is produced by bacterial fermentation from natural plant corn stalks, etc. In this study, novel ternary nanocomposites consisting of PHBV/cellulose nanocrystal-graphene oxide nanohybrids were prepared via a simple solution casting method. The synergistic effect of CNC with GO nanohybrids obtained by chemical grafting (CNC-GO, covalent bonds) and physical blending (CNC/GO, noncovalent bonds) on the physicochemical properties of PHBV nanocomposites was evaluated and the results compared with a single component nanofiller (CNC or GO) in binary nanocomposites. More interestingly, ternary nanocomposites displayed the highest thermal stability and mechanical properties. Compared to neat PHBV, the tensile strength and elongation to break increased by 170.2 and 52.1%, respectively, and maximum degradation temperature (T-max) increment by 26.3 degrees C, were observed for the ternary nanocomposite with 1 wt % covalent bonded CNC-GO. Compared to neat PHBV, binary, and 1:0.5 wt % noncovalent CNC/GO based nanocomposites, the ternary nanocomposites with 1 wt % covalent bonded CNC-GO exhibited excellent barrier properties, good antibacterial activity (antibacterial ratio of 100.0%), reduced barrier properties, and lower migration level for both food simulants. Such a synergistic effect yielded high-performance ternary nanocomposites with great potential for bioactive food packaging materials.
Multifunctional hybrid composite films based on biodegradable cellulose nanofibers, aloe juice, and carboxymethyl cellulose

Cangheng Zhang,Xiaodeng Yang,Yan Li,Shunping Wang,Yongchao Zhang,Huan Yang,Jinling Chai,Tianduo Li

DOI: https://doi.org/10.1007/s10570-021-03838-2

IF: 6.123

2021-03-31

Cellulose

Abstract:Cellulose nanofibers isolated from birch kraft pulp were incorporated into carboxymethyl cellulose-based films as a mechanical strength enhancer, and aloe juice was used as an antibacterial agent. Fourier-transform spectroscopy was performed and indicated the presence of hydrogen bonds that enhance the intermolecular interactions between the carboxymethyl groups and cellulose nanofibers in the prepared film. The incorporation of 5 wt% cellulose nanofibers significantly increased the tensile strength to 21-fold that of films lacking the nanofibers. The addition of aloe juice resulted in films with strong antibacterial activities against E. coli and S. aureus that prolong the shelf life of fresh pork. Cellulose nanofibers and aloe juice both increase the thermal stability and glass transition temperature of the carboxymethyl cellulose-based films, with little effect on the whiteness, transmittance, and wettability of these films. The rheological properties were characterized and revealed competitive interactions between cellulose nanofibers, carboxymethyl cellulose-based films, and aloe juice. The results show that the modified film is a promising material for use in food packaging.

materials science, textiles,polymer science, paper & wood
Physical properties of cellulose nanocrystal/magnesium oxide/chitosan transparent composite films for packaging applications

Mithilesh Yadav,Anil Kumar Maurya,Kartik Behera,Fang-Chyou Chiu,K.Y. Rhee

DOI: https://doi.org/10.1016/j.ijbiomac.2024.130560

IF: 8.2

2024-04-01

International Journal of Biological Macromolecules

Abstract:Hitherto unreported hybrid nanofillers (CNC:MgO) reinforced chitosan (CTS) based composite (CNC:MgO)/CTS films were synthesized using a solution-casting blend technique and synergistic effect of hybrid nanofiller in terms of properties enhancement were investigated. Optical microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) technique, fourier-transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FESEM) were used to characterize the films. The hybrid nanofiller considerably changed the transparency and color of the CTS films. The tensile strengths of (3 wt%) CNC/CTS, (3 wt%) MgO/CTS, (1:1)(CNC:MgO)/CTS, (1:2)(CNC:MgO)/CTS and (2:1)(CNC:MgO)/CTS films were 27.49 %, 35.60 %, 91.62 %, 38.22 %, and 29.32 % higher than pristine CTS films respectively, while the water vapor permeation were 28.21 %, 30.77 %, 34.62 %, 38.46 %, and 37.44 % lower than pristine CTS film, respectively. Moreover, the CTS composite films exhibited an improvement in overall water barrier properties after incorporating hybrid nanofillers. Our observations suggest that chitosan-based hybrid nanofiller composite films are a good replacement for plastic-based packaging materials within the food industry.

polymer science,biochemistry & molecular biology,chemistry, applied
Design of cellulose nanofibre-based composites with high barrier properties

Luís Alves,Ana Ramos,Eduardo Ferraz,Paulo J. T. Ferreira,Maria G. Rasteiro,José A. F. Gamelas

DOI: https://doi.org/10.1007/s10570-023-05495-z

IF: 6.123

2023-09-21

Cellulose

Abstract:Gas barrier properties are very relevant in composite materials for applications so diverse such as food packaging, electronics, or old document restoration. In the present work, four different types of cellulose nanofibres (CNFs), two types of clay minerals used individually (sepiolite) or combined (sepiolite + kaolinite), and the influence of pH, were explored in the production of composite films. Neat CNFs, only mechanically treated or prepared by enzymatic pre-treatment, gave films with good mechanical and barrier properties, but the addition of minerals led to a dramatic loss of these properties. Contrarily, the use of thin and functionalized fibrils (TEMPO-oxidised or cationized CNFs) gave composite films with good mechanical, thermal and barrier properties. Superior oxygen barrier properties (oxygen transmission rate (OTR) < 0.4 cm 3 m −2 day −1 ) were obtained using TEMPO-oxidised CNF and 20% sepiolite, and, in general, for all the composite films containing the TEMPO CNF (OTR ≤ 1.8 cm 3 m −2 day −1 ). The cationic CNF-based composites also showed a very good oxygen barrier (OTR ≤ 8.2 cm 3 m −2 day −1 ). The high oxygen barrier could be explained by the compactness of the films and better entanglement of the more fibrillated nanocelluloses with the mineral particles. A decrease in the pH of the suspensions led to a decrease in the film preparation time, without a major negative impact on the composite film's properties.

materials science, textiles,polymer science, paper & wood
Stellar stability by thermodynamic instability.

H. Posch,W. Thirring

DOI: https://doi.org/10.1103/PHYSREVLETT.95.251101

IF: 8.6

2005-12-13

Physical Review Letters

Abstract:For gravity-dominated systems the three features shrinking <=> energy decrease <=> temperature increase are dynamically linked together. So are their inverses: expansion <=> energy increase <=> temperature decrease. We exhibit these features by one classical particle in a suitable environment, and by many particles with purely attractive interactions. We then show how the ensuing negative heat capacity tames an explosive energy input.
Arabinoxylan/nanofibrillated cellulose composite films

Jasna S. Stevanic,Elina Mabasa Bergström,Paul Gatenholm,Lars Berglund,Lennart Salmén

DOI: https://doi.org/10.1007/s10853-012-6615-8

IF: 4.5

2012-06-16

Journal of Materials Science

Abstract:There is an increasing interest in substituting petroleum based polymer films, for food packaging applications, with films based on renewable resources. In many of these applications, low oxygen permeability and low moisture uptake of films are required, as well as high enough strength and flexibility. For this purpose, rye arabinoxylan films reinforced with nanofibrillated cellulose was prepared and evaluated. A thorough mixing of the components resulted in uniform films. Mechanical, thermal, structural, moisture sorption and oxygen barrier characteristics of such films are reported here. Reinforcement of arabinoxylan with nanofibrillated cellulose affected the properties of the films positively. A decrease in moisture sorption of the films, as well as an increase in stiffness, strength and flexibility of the films were shown. From these results and dynamic FTIR spectra, a strong coupling between reinforcing cellulose and arabinoxylan matrix was concluded. Oxygen barrier properties were equal or better as compared to the neat rye arabinoxylan film. In general, the high nanofibrillated cellulose containing composite film, i.e. 75 % NFC, showed the best properties.

materials science, multidisciplinary
Transparent and Flexible Nacre‐Like Hybrid Films of Aminoclays and Carboxylated Cellulose Nanofibrils

Yingxin Liu,Shu-Hong Yu,Lennart Bergstrom

DOI: https://doi.org/10.1002/adfm.201703277

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:Nacre and other biological composites are important inspirations for the design and fabrication of multifunctional composite materials. Transparent, strong, and flexible hybrid films of aminoclays (AC) and carboxylated cellulose nanofibrils (CNF) with a nacre‐like microstructure at AC contents up to 60 wt% are prepared. The high transmittance of visible light is attributed to the high homogeneity of the hybrid films and to the relatively small refractive index contrast between the CNF‐based matrix and synthetic AC. The strength and strain to failure of the hybrids are significantly higher than biogenic nacre and other nacre‐mimicking nanocellulose‐based materials, e.g., montmorillonite‐CNF and graphene oxide‐CNF composite films. The excellent mechanical properties are related to the ionic bonds between the negatively charged carboxylic groups on the CNF and the positively charged amine groups on the AC nanoparticles. This work illustrates the significance of tailoring the interactions between small clay particles and biopolymers in multifunctional materials with potential applications as printable barrier coatings and substrates for optoelectronics.
Transparent biodegradable composite plastic packaging film from TEMPO-oxidized cellulose nanofibers

Jia-Sheng Tang,Ching-Tai Kuo,Ying-Chih Liao

DOI: https://doi.org/10.1016/j.ijbiomac.2024.129502

IF: 8.2

2024-01-19

International Journal of Biological Macromolecules

Abstract:In this research, we develop a method to create biodegradable food packaging films. Initially, TEMPO-oxidized cellulose nanofiber (TOCNF) undergoes sonication to produce well-dispersed single-strain nanofibers. These nanofibers are then blended with waterborne polyurethane (WPU) to enhance their extensibility. To further enhance compatibility between these two components, a non-ionic surfactant, Tween 80, is introduced into the TOCNF/WPU mixture to improve the dispersion of the WPU within the blend. The addition of Tween 80 significantly increases the transparency of the resulting film (Transmittance: 89.4 %, Haze: 2.2 %). Furthermore, the incorporation of the surfactant effectively reduces the formation of wrinkles and cracks during the film drying process, preventing adverse impacts on the film's barrier properties. The thin film further undergoes esterification crosslinking with citric acid to remove its hydrophilic groups for better water vapor barrier properties. The resulting bio-based packaging film exhibits remarkable transparency, strong biodegradability, and superior gas-barrier properties (water vapor and oxygen) compared to commonly used food packaging.

polymer science,biochemistry & molecular biology,chemistry, applied
Biophysical studies with spatially correlated ions. 4. Analysis of cell survival data for diatomic deuterium.

A. Kellerer,Y. P. Lam,H. Rossi

DOI: https://doi.org/10.2307/3575333

1980-09-01

Radiation Research

Abstract:An analysis is given of previously reported results of experiments in which cells have been irradiated with pairs of ions of variable mean separation. These studies were motivated by the theory of dual radiation action and specifically by the postulate that the lesions responsible for cell impairment by ionizing radiation are formed by the combination of pairs of sublesions that are molecular alterations produced by individual energy transfers in the cell nucleus. It is concluded that the observations are consistent with dual radiation action, and the most striking finding is that there appears to be a bimodal distribution of interaction distances with maxima at less than 0.1 ..mu..m and more than 1 ..mu..m. Single tracks cause primarily the lesions produced in short-range interactions but they also contribute, at least in late S phase, a relatively small proportion of the long-range interactions which are principally due to a two-track mechanism. The experiments suggest that the radiation-sensitive components of the cell are arranged in a highly nonuniform pattern which may take the form of floccules having diameters of less than 100 nm.
Ultra-thin parylene-aluminium hybrid coatings on nanocellulose films to resist water sensitivity

Jatin Sethi,Eric Glowacki,Michael S. Reid,Per A. Larsson,Lars Wågberg

DOI: https://doi.org/10.1016/j.carbpol.2023.121365

IF: 10.723

2024-01-01

Carbohydrate Polymers

Abstract:Non-sustainable single-use plastics used for food packaging needs to be phased out. Films made from cellulose nanofibrils (CNFs) are suitable candidates for biodegradable and recyclable packaging materials as they exhibit good mechanical properties, excellent oxygen barrier properties and high transparency. Yet, their poor water vapour barrier properties have been a major hindrance in their commercialisation. Here, we describe the preparation of 25 μm thick CNF films with significantly improved water vapour barrier properties after deposition of ultrathin polymeric and metallic coatings, parylene C and aluminium, respectively. When first adding a 40 nm aluminium layer followed by an 80 nm parylene layer, i.e. with a combined thickness of less than one percent of the CNF film, a water vapour transmission rate of 2.8 g m−2 d−1 was achieved at 38 °C and 90 % RH, surpassing a 25 μm polypropylene film (4–12 g m−2 d−1). This is an improvement of more than 700 times compared to uncoated CNF films, under some of the harshest possible conditions a packaging material will need to endure in commercial use. The layers showed a good and even coverage, as assessed by atomic force microscopy, and the parylene-coated surfaces were hydrophobic with a contact angle of 110°, providing good water repellency.

polymer science,chemistry, organic, applied
A novel paper-based composite film with enhanced oxygen and water vapor barrier properties

Xiangjie Chen,Bin Xiao,Yutian Yang,Yu Jiang,Xiaoming Song,Fushan Chen,Wentao Wang,Jianqing Wu,Yao Meng

DOI: https://doi.org/10.1016/j.porgcoat.2023.108042

IF: 6.6

2023-11-02

Progress in Organic Coatings

Abstract:Paper-based composite films have demonstrated significant potential in the field of packaging materials. However, the gas barrier properties of these films have been found to be less than satisfactory, primarily due to the inherent porosity and hydrophilic nature of cellulose-based paper. Consequently, the challenge of enhancing the gas barrier performance, particularly in relation to oxygen and water vapor, remains a formidable obstacle. In this study, drawing inspiration from the well-established multilayer composite model, which incorporates both organic and inorganic layers, an efficient strategy has been devised to enhance the gas barrier performance of paper-based packaging materials. The organic barrier layers in this approach utilize polyvinyl alcohol and polyacrylate. Meanwhile, the critical inorganic barrier layer is composed of functionalized SiO 2 @polydopamine nanoparticles (SiO 2 @PDA NPs). Importantly, due to the isotropic nature of the SiO 2 @PDA NPs, concerns related to the orientation control and exfoliation of 2D layered materials are alleviated within this system. The introduction of a crosslinker, 3-aminopropyl triethoxysilane, serves to bridge the gap between SiO 2 @PDA NPs, facilitating the tight concatenation of NPs through Schiff base or Michael addition reactions. Utilizing coating technology, a paper-based multilayer film was fabricated. As a result, the oxygen transmission rate of the composite film was substantially reduced to 0.3077 cm 3 /cm 2 ·24 h·0.1 MPa, and the water vapor transmission rate was lowered to 4.1109 g/m 2 ·24 h. Significantly, these composite films exhibit exceptional water resistance and mechanical properties, rendering them highly suitable for the packaging of a wide range of sensitive products, including food items, pharmaceuticals, electronic devices, and other gas-sensitive products.

materials science, coatings & films,chemistry, applied
Flexible Cellulose Nanofibers/mxene Composite Films for UV-shielding Packaging

Meng He,Yujia Huang,Xinjiang Zhang,Wenyu Zhu,Wenjing Shao,Jinhua Wang,Dingfeng Xu,Wei Yao

DOI: https://doi.org/10.1016/j.ijbiomac.2024.130821

IF: 8.2

2024-01-01

International Journal of Biological Macromolecules

Abstract:Cellulose nanofibers (CNF) based films are promising packaging materials, but the lack of special functions (especially UV-shielding property) usually restrict their further applications. In this work, MXene was incorpo-rated into the CNF film by a direct solvent volatilization induced film forming method to study its UV-shielding property for the first time, which avoided the using of a vacuum filtration equipment. The composite films containing glycerin could be folded repeatedly without breaking, showing good flexibility. The structure and properties of MXene/CNF composite films (CMF) were characterized systematically. The results showed that MXene distributed uniformly in the CNF film matrix and there was strong hydrogen bonding interaction between CNF and MXene. The tensile strength and Young's modulus of the composite films could reach 117.5 MPa and 2.23 GPa, which was 54.1 % and 59.2 % higher than those of pure CNF film, respectively. With the increase of MXene content, both the UVA and UVB shielding percentages increased significantly from 17.2 % and 25.5 % to 100.0 %, showing excellent UV-shielding property. Moreover, CMF exhibited a low oxygen permeability (OP) value of 0.39 cc mu m d(-1) m(-2) kPa(-1), a low water vapor permeability (WVP) value of 5.13 x10(11) g(-1)s(-1)Pa(-1) and a high antibacterial rate against E. coli (94.1 % at 24 h), showing potential application in the packaging field.
Gelatin/Cellulose Nanofiber-Based Functional Nanocomposite Film Incorporated with Zinc Oxide Nanoparticles

Swarup Roy,Deblina Biswas,Jong-Whan Rhim

DOI: https://doi.org/10.3390/jcs6080223

2022-08-04

Journal of Composites Science

Abstract:A novel bio-based nanocomposite film was developed using the combination of gelatine and cellulose nanofiber (CNF) as a polymer matrix and zinc oxide nanoparticles (ZnONP) as nanofillers. The nanocomposite film solution was developed using simple solution mixing and film prepared by the following casting methods. The fabricated nanocomposite film containing 2 wt% of ZnONP shows excellent UV-light barrier properties (>95%) and high transparency (>75%). The presence of ZnONP also improves the mechanical strength of the film by ~30% compared to pristine gelatin/CNF-based film, while the flexibility and rigidity of the nanocomposite film were also slightly improved. The addition of ZnONP slightly increased (~10%) the hydrophobicity while the water vapor barrier properties remain unaltered. The hydrodynamic properties of the bio-based film were also changed in the presence of ZnONP, moisture content and the swelling ratio slightly enhanced, whereas water solubility was decreased. Moreover, the integration of ZnONP introduced antibacterial activity toward foodborne pathogens. The fabricated bio-based nanocomposite film could be useful in active packaging applications.
A Simple Approach for the Synthesis of Cellulose Nanofiber Reinforced Chitosan/PVP Bio Nanocomposite Film for Packaging

Ritesh Kumar,Bhuvneshwar Rai,Gulshan Kumar

DOI: https://doi.org/10.1007/s10924-019-01588-8

IF: 4.705

2019-10-16

Journal of Polymers and the Environment

Abstract:The development of chitosan-based food packaging film has been increasing due to its wider availability, biodegradability, low-cost, and renewability. The purpose of this study was to develop cellulose nanofibers (CNFs) reinforced Chitosan/PVP(CHP) green bio nanocomposite film by solvent casting method with enhanced barrier and mechanical property. CNFs of dimension 9–11 nm and 100–200 nm were extracted from jute fibers by directly treating it with HNO3–NaNO2 mixture. Bio nanocomposite films were synthesized with various concentrations of CNFs and evaluated using SEM, TGA/DTG and XRD to analyze the morphology, thermal behavior and crystallinity of bio nanocomposite films. SEM analysis revealed the uniform dispersion of CNFs in CHP matrix. Thermal stability of prepared bio nanocomposite films was improved with the loading of 5 wt% of cellulose nanofibers. ATR(FT-IR) spectra shows physical interaction between all the components of bio nanocomposite film. The bio nanocomposite films were also characterized for physical property like thickness, mechanical testing and barrier properties. The addition of CNFs significantly enhanced the mechanical property of bio nanocomposite films. Furthermore, water and oxygen transmission rate of bio nanocomposite film decreased with the increase in CNFs concentration. Overall the performed studies confirmed, the use of CNFs in polymer matrix makes it possible to produce a flexible, transparent, thermally stable bio nanocomposite film with enhanced mechanical and barrier properties for food packaging applications.

engineering, environmental,polymer science

[Secondary biceps brachii muscle (M. biceps brachii secundarius)].

Anisotropic, Transparent Films with Aligned Cellulose Nanofibers

Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Promising nanocomposites for food packaging based on cellulose – PCL films reinforced by using ZnO nanoparticles in an ionic liquid

Problems of long-term spinal opioid treatment in advanced cancer patients

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Transparent Cellulose Films with High Gas Barrier Properties Fabricated from Aqueous Alkali/Urea Solutions

Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

Multifunctional hybrid composite films based on biodegradable cellulose nanofibers, aloe juice, and carboxymethyl cellulose

Physical properties of cellulose nanocrystal/magnesium oxide/chitosan transparent composite films for packaging applications

Design of cellulose nanofibre-based composites with high barrier properties

Stellar stability by thermodynamic instability.

Arabinoxylan/nanofibrillated cellulose composite films

Transparent and Flexible Nacre‐Like Hybrid Films of Aminoclays and Carboxylated Cellulose Nanofibrils

Transparent biodegradable composite plastic packaging film from TEMPO-oxidized cellulose nanofibers

Biophysical studies with spatially correlated ions. 4. Analysis of cell survival data for diatomic deuterium.

Ultra-thin parylene-aluminium hybrid coatings on nanocellulose films to resist water sensitivity

A novel paper-based composite film with enhanced oxygen and water vapor barrier properties

Flexible Cellulose Nanofibers/mxene Composite Films for UV-shielding Packaging

Gelatin/Cellulose Nanofiber-Based Functional Nanocomposite Film Incorporated with Zinc Oxide Nanoparticles

A Simple Approach for the Synthesis of Cellulose Nanofiber Reinforced Chitosan/PVP Bio Nanocomposite Film for Packaging