Abstract:Results from the temperature field and thermal deformation simulation of a spindle system are greatly affected by the accuracy of convective heat transfer coefficients (CHTCs). This paper presents a new method based on radial basis function (RBF) neural network to calculate CHTCs. First, the temperature field and thermal deformations of a spindle system were obtained by experimental and finite-element (FE) methods. However, the simulation results are significantly different from the experimental results because boundary conditions used for the FE model were derived empirically. Second, the relationship between the simulated temperature values and CHTCs were established by a RBF neural network. Using the experimental temperature values as an input vector of the RBF neural network, CHTCs of the spindle system can be predicted through an iterative calculation taking 14 cycles. Finally, the effectiveness of the proposed method was proved using steady-state and transient-state analyses of the spindle system. Results from the steady-state simulation show that temperature errors were less than 4 % at the seven thermal-critical points and deformation errors in the three directions were less than 6 %. Results from the transient-state simulation of the spindle system show that the variations for each of the thermal characteristics are in good agreement with the experimental results. The method provides guidance for modifying boundary conditions of a FE model.

Thermal process identification based on differential evolution and RBF neural network

Non-linear Model Predictive Control Based on Neural Network Model with Modified Differential Evolution Adapting Weights

Neural network system identification based on levenberg-marquardt algorithm

A Novel Nonlinear Dynamic System Modeling Approach Using Radial Basis Function Neural Networks

Nonlinear adaptive control based on RBF networks and multi-model method

Online Parameter Identification for Surface-mounted Magnet Synchronous Motors Based on Adaptive RBF Neural Network

Efficient Identification Of Rbf Neural-Net Models For Nonlinear Discrete-Time Multivariable Dynamical-Systems

Variable Selection for Nonlinear Soft Sensor Development with Enhanced Binary Differential Evolution Algorithm

Nonlinear Temperature Modeling and Prediction of MCFC Based on RBF Neural Networks

A neural network based temperature control for air handling unit

Deep Learning Based Closed-loop Identification of Typical Thermal Process Model

Twin-layer Online Identification of Thermal Systems

Identification of Nonlinear Discrete-Time Multivariable Dynamical Systems by RBF Neural Networks

Application of RBF recursion neural network to heat supply decoupling control

Internal thermally coupled distillation column based on RBF neural network of internal model control by hybrid optimization algorithm

Calculation Method of Convective Heat Transfer Coefficients for Thermal Simulation of a Spindle System Based on RBF Neural Network

The Improved Radial Basis Function Neural Network and Its Application

An Identification Model of Nonlinear Dynamic System Based on Process Neural Network and Its Application

A Novel Linear Recurrent Neural Network for Multivariable System Identification

Thermal neural networks: Lumped-parameter thermal modeling with state-space machine learning

Nonlinear modelling of MCFC stack based on RBF neural networks identification | Nelinearno modeliranje MCFC skupa zasnovanog na identifikaciji RBF neuralnih mreža