Abstract:In structural deformation monitoring, traditional methods are mainly based on the deformation data measured at several individual points. As a result, only the discrete deformation, not the overall one, can be obtained, which hinders the researcher from a better and all-round understanding on the structural behavior. At the same time, the surrounding area around the measuring structure is usually complicated, which notably escalates the difficulty in accessing the deformation data. In dealing with the said issues, a digital image-based method is proposed for the overall structural deformation monitoring, utilizing the image perspective transformation and edge detection. Due to the limitation on camera sites, the lens is usually not orthogonal to the measuring structure. As a result, the obtained image cannot be used to extract the deformation data directly. Thus, the perspective transformation algorithm is used to obtain the orthogonal projection image of the test beam under the condition of inclined photography, which enables the direct extraction of deformation data from the original image. Meanwhile, edge detection operators are used to detect the edge of structure’s orthogonal projection image, to further characterize the key feature of structural deformation. Using the operator, the complete deformation data of structural edge are obtained by locating and calibrating the edge pixels. Based on the above, a series of load tests has been carried out using a steel–concrete composite beam to validate the proposed method, with the implementation of traditional dial deformation gauges. It has been found that the extracted edge lines have an obvious sawtooth effect due to the illumination environment. The sawtooth effect makes the extracted edge lines slightly fluctuate around the actual contour of the structure. On this end, the fitting method is applied to minimize the fluctuation and obtain the linear approximation of the actual deflection curve. The deformation data obtained by the proposed method have been compared with the one measured by the dial meters, indicating that the measurement error of the proposed method is less than 5%. However, since the overall deformation data are continuously measured by the proposed method, it can better reflect the overall deformation of the structure, and moreover the structural health state, when compared with the traditional “point” measurements.

Evaluation of feature- and pixel-based methods for deflection measurements in temporary structure monitoring

Image-Based Structural Dynamic Displacement Measurement Using Different Multi-Object Tracking Algorithms

A Three-Step Computer Vision-Based Framework for Concrete Crack Detection and Dimensions Identification

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Experimental Study on Measuring and Tracking Structural Displacement Based on Surveillance Video Image Analysis

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Environmental effect on vision-based structural dynamic displacement monitoring

Computer vision-based real-time deflection monitoring of complex and sizeable steel structures

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Vision-based Structural Displacement Measurement: System Performance Evaluation and Influence Factor Analysis

A remote deflection detection method for long-span bridges using adaptive mask and high-resolution camera

Short-distance and long-distance bridge displacement measurement based on template matching and feature detection methods

Full-Field Bridge Deflection Monitoring with Off-Axis Digital Image Correlation

A non-target structural displacement measurement method using advanced feature matching strategy

Three-dimensional Structural Displacement Measurement Using Monocular Vision and Deep Learning Based Pose Estimation

Real‐time generic target tracking for structural displacement monitoring under environmental uncertainties via deep learning

Comparison of Depth Camera and Terrestrial Laser Scanner in Monitoring Structural Deflections

An Anti-Occlusion Vision-Based Method for Structural Motion Estimation

In-situ observation and calibration for structure safety diagnosis through finite element analysis and mixed reality

An Overall Deformation Monitoring Method of Structure Based on Tracking Deformation Contour

Cost-effective, vision-based multi-target tracking approach for structural health monitoring