Abstract:Blending high-permittivity (εr) ceramic powders or conductive fillers into polymers to form 0-3-type composites has been regarded as one of the most promising processes to achieve high-dielectric-permittivity materials with excellent processing performance. The high dielectric loss and conductivity induced by the interface between the matrix and fillers as well as the leakage current have long been a great challenge of dielectric composites, and the resolution of these challenges is still an open question. In this work, poly(vinylidenefluoride-trifluorethylene with double bonds)/graphene nanosheets (P(VDF-TrFE-DB)/GNS) terpolymer nanocomposites were fabricated via a solution-cast process. GNSs were functionalized with KH550 to improve the dispersion in the terpolymer matrix solution and crosslinked with P(VDF-TrFE-DB) by a free-radical addition reaction in the nanocomposites. Compared with neat terpolymer, significantly increased dielectric permittivity and a low loss were observed for the composites. For instance, at 1 kHz the P(VDF-TrFE-DB)/GNS composites with 4 vol % GNS possessed a dielectric permittivity of 74, which is over seven times larger than that of neat terpolymer. However, a rather low dielectric loss (0.08 at 1 kHz) and conductivity (3.47 × 10(-7) S/m at 1 kHz) are observed in the P(VDF-TrFE-DB)/GNS composites containing up to 12 vol % GNS. The covalent bonding constructed between P(VDF-TrFE-DB) and GNS is responsible for the reduced aspect ratio of the GNS and the crystalline properties of P(VDF-TrFE-DB) as well as the improved compatibility between them. As a result, the high-dielectric-loss conductivity of polymer composites, mainly induced by conduction loss and the interface polarization between the matrix and filler, were effectively restricted. Meanwhile, the 3D network established between P(VDF-TrFE-DB) and GNS endows the P(VDF-TrFE-DB)/GNS composites at high temperature with excellent mechanical and dielectric properties. Besides preparing high-performance dielectric composites, this facile route may also be utilized to fabricate high-performance nanocomposites by inhibiting the poor compatibility between fillers and polymeric matrix.

Green Dielectric Materials Composed of Natural Graphite Minerals and Biodegradable Polymer

High Dielectric Performance Composites with a Hybrid BaTiO3/Graphene As Filler and Poly(vinylidene Fluoride) As Matrix

Polyarylene Ether Nitrile/graphene Oxide Dielectric Nanocomposite Plasticized by Silicone Powder

Investigation on the Dielectric Properties of PVDF-Matrix Composite Films Containing Functionalized Graphene

Advanced Dielectric Polymer Nanocomposites By Constructing A Ternary Continuous Structure In Polymer Blends Containing Poly(Methyl Methacrylate) (Pmma) Modified Carbon Nanotubes

Gradient Dielectric Constant Sandwich-Structured BaTiO3/PMMA Nanocomposites with Strengthened Energy Density and Ultralow-Energy Loss

Fluoro-polymer functionalized graphene for flexible ferroelectric polymer-based high-k nanocomposites with suppressed dielectric loss and low percolation threshold.

Polyarylene Ether Nitrile Dielectric Composites with Good Formability and Processability

Chemical bonding-induced low dielectric loss and low conductivity in high-K poly(vinylidenefluoride-trifluorethylene)/graphene nanosheets nanocomposites.

Gradient-layered Polymer Nanocomposites with Significantly Improved Insulation Performance for Dielectric Energy Storage

High Dielectric Permittivity And Low Dielectric Loss Nanocomposites Based On Poly(Vdf-Trfe-Ctfe) And Graphene Nanosheets

Morphology-controllable Graphene–tio2 Nanorod Hybrid Nanostructures for Polymer Composites with High Dielectric Performance

All-organic Dielectric Nanocomposites Using Conducting Polypyrrole Nanoclips As Filler

Percolative Conductor/Polymer Composite Films with Significant Dielectric Properties

High Dielectric Performance of Polymer Composite Films Induced by a Percolating Interparticle Barrier Layer

Facile green path to interconnected nano-graphite networks to overtake graphene as conductive fillers

Nano-clip Based Composites with a Low Percolation Threshold and High Dielectric Constant

Carbon Nanotube Filled Polymer-Based Dielectric Composites With High Dielectric Constant

Functional Graphene for High Dielectric Performance Polymer Composites

Improving Energy Storage Density and Efficiency of Polymer Dielectrics by Adding Trace Biomimetic Lysozyme-Modified Boron Nitride

Simultaneous enhancement of breakdown strength and discharged energy efficiency of tri-layered polymer nanocomposite films by incorporating modified graphene oxide nanosheets