Enhanced Electrochemical Performance of Li–O2 Battery Based on Modifying the Solid-State Air Cathode with Pd Catalyst

Xiaofei Wang,Shengrong Cai,Ding Zhu,Yungui Chen

DOI: https://doi.org/10.1039/c5ra15206b

IF: 4.036

2015-01-01

RSC Advances

Abstract:A Pd catalyst has a positive effect on the performance of a Li–O2 battery using a solid-state air cathode.

What problem does this paper attempt to address?

Perovskite Sr0.9Y0.1CoO3-delta Nanorods Modified with CoO Nanoparticles as a Bifunctional Catalyst for Rechargeable Li-O-2 Batteries

Jie Wang,Xiaopeng Cheng,Zhaolong Li,Meng Xu,Yao Lu,Shengming Liu,Yuefei Zhang,Chunwen Sun

DOI: https://doi.org/10.1021/acsaem.8b01108

IF: 6.4

2018-01-01

ACS Applied Energy Materials

Abstract:For practical application of lithium-oxygen batteries, one of the challenges is the development of efficient bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in cathode. In this work, perovskite Sr0.9Y0.1CoO3-delta nanorods are synthesized by an electrospinning method. The performance of the Li-O-2 cell with Sr0.9Y0.1CoO3-delta catalysts is better than that of the cell only with Super-P. Furthermore, modification of CoO nanoparticles on the cathode can provide an obviously improved electrochemical performance with a reduced voltage gap (-80-140 mV), which is ascribed to the superior catalytic activity of CoO nanoparticles toward OER. All of these results demonstrate that the perovskite Sr0.9Y0.1CoO3-delta is an efficient bifunctional electrocatalyst for lithium-oxygen batteries, and the incorporation of CoO nanoparticles is an effective approach for improving the cathode performance as well.
Oxygen-enriched carbon material for catalyzing oxygen reduction towards hybrid electrolyte Li-air battery

Shan Wang,Shanmu Dong,Jun Wang,Lixue Zhang,Pengxian Han,Chuanjian Zhang,Xiaogang Wang,Kejun Zhang,Zhenggang Lan,Guanglei Cui

DOI: https://doi.org/10.1039/c2jm34119k

2012-01-01

Journal of Materials Chemistry

Abstract:Graphene oxide, with sufficient oxygen-containing groups, is integrated with electronically conductive carbon nanotubes to be explored as an efficient metal-free catalyst for the oxygen reduction reaction. Preliminary theoretical calculations with the density functional theory method indicate that the existence of graphene oxide is favorable for the adsorption and subsequent four-electron reduction reactions of O-2. Furthermore, this oxygen-enriched hybrid material was tested as a cathode in aprotic/aqueous hybrid electrolyte Li-air batteries. The hybrid material exhibited a very low overpotential (the voltage gap at 0.1 mA cm(-2) is only 0.17 V) and better electrocatalytic performance owing to abundant oxygen containing groups and its excellent electroconductivity. These experimental and theoretical demonstrations should provide an important mechanistic insight into carbon-based metal-free catalysts in fuel cells and metal-air battery applications. We believe that the demonstrations shown in this paper provide a promising strategy to investigate highly efficient metal-free catalysts for advanced energy devices.
Pd Nanoparticles on Zno-Passivated Porous Carbon by Atomic Layer Deposition: an Effective Electrochemical Catalyst for Li-O-2 Battery

Xiangyi Luo,Mar Piernavieja-Hermida,Jun Lu,Tianpin Wu,Jianguo Wen,Yang Ren,Dean Miller,Zhigang Zak Fang,Yu Lei,Khalil Amine

DOI: https://doi.org/10.1088/0957-4484/26/16/164003

IF: 3.5

2015-01-01

Nanotechnology

Abstract:Uniformly dispersed Pd nanoparticles on ZnO-passivated porous carbon were synthesized via an atomic layer deposition (ALD) technique, which was tested as a cathode material in a rechargeable Li-O-2 battery, showing a highly active catalytic effect toward the electrochemical reactions-in particular, the oxygen evolution reaction. Transmission electron microscopy (TEM) showed discrete crystalline nanoparticles decorating the surface of the ZnO-passivated porous carbon support in which the size could be controlled in the range of 3-6 nm, depending on the number of Pd ALD cycles performed. X-ray absorption spectroscopy (XAS) at the Pd Kedge revealed that the carbon-supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The ZnO-passivated layer effectively blocks the defect sites on the carbon surface, minimizing the electrolyte decomposition. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports for Li-O-2 batteries.
Effect of oxygen adsorbability on the control of Li2O2 growth in Li-O2 batteries: Implications for cathode catalyst design

Zhiyang Lyu,Lijun Yang,Yanping Luan,Xiao Renshaw Wang,Liangjun Wang,Zehua Hu,Junpeng Lu,Shuning Xiao,Feng Zhang,Xizhang Wang,Fengwei Huo,Wei Huang,Zheng Hu,Wei Chen

DOI: https://doi.org/10.1016/j.nanoen.2017.04.022

IF: 17.6

2017-01-01

Nano Energy

Abstract:Understanding and controlling the growth of the vital Li2O2 product, which is associated with intrinsic property of cathode surface, is essential to design effective cathode catalysts in Li-O2 batteries. Herein we establish the correlation between the Li2O2 growth model and the O2 adsorbability on cathode surface that determines the pathway of the first electron transfer to O2. The weak O2 adsorbability drives the solution growth model to form Li2O2 toroid, while the strong one drives the surface growth model to thin film. Based on this mechanism, we select the N-doped carbon nanocages as cathode to realize a simultaneous large discharge capacity and low charge overpotential by forming copious thin-film Li2O2, deriving from its high specific surface area and enhanced O2 adsorbability due to N-doping. Our study demonstrates an effective strategy to design advanced cathode catalysts in Li–O2 batteries and potentially other metal-air batteries.
Optimization of Oxygen Electrode Combined with Soluble Catalyst to Enhance the Performance of Lithium–oxygen Battery

Meiling Wang,Ying Yao,Xuanxuan Bi,Tuo Zhao,Guanzhong Zhang,Feng Wu,Khalil Amine,Jun Lu

DOI: https://doi.org/10.1016/j.ensm.2020.02.026

IF: 20.4

2020-01-01

Energy Storage Materials

Abstract:Lithium-air batteries possess a high theoretical energy density among the current battery technologies, and are expected to become the driving power for electric vehicles. However, the practical application of lithium air batteries is handicapped by their poor cycle life, high over-charge potential and low energy efficiency. Numerous studies have performed to improve the kinetics of the electrochemical reaction. Making a good oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalyst system is under intense scrutiny. In this work, we report a rational design of air electrode, which derives from biomass and presents a three-dimensional porous carbon architecture with high specific surface and large volume expansion coefficient. Combining with a soluble catalyst, this oxygen electrode presents an ultrahigh areal specific capacity of 7.95 mAh/cm(2) and a long cycling life up to 1000 cycles with suppressed polarization (about 0.46 V). The greatly improved overall performance is due to the synergetic effect of the novel designed oxygen electrode capable of mediating the redox mediators to trigger the ORR and OER process.
An in Situ Formed Pd Nanolayer As A Bifunctional Catalyst for Li-Air Batteries in Ambient or Simulated Air

Ding Zhu,Lei Zhang,Ming Song,Xiaofei Wang,Yungui Chen

DOI: https://doi.org/10.1039/c3cc45574b

IF: 4.9

2013-01-01

Chemical Communications

Abstract:We demonstrate for the first time that a Pd nanolayer, which is in situ formed on the Ni foam via the galvanic exchange method, greatly improves the energy output, the round-trip efficiency and the cyclability of the aprotic Li-air battery in ambient or simulated air.
Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering

Yuankun Wang,Ruifang Zhang,Jie Chen,Hu Wu,Shiyao Lu,Ke Wang,Huanglong Li,Christopher J. Harris,Kai Xi,Ramachandran Vasant Kumar,Shujiang Ding

DOI: https://doi.org/10.1002/aenm.201900953

IF: 27.8

2019-01-01

Advanced Energy Materials

Abstract:The altering of electronic states of metal oxides offers a promising opportunity to realize high-efficiency surface catalysis, which play a key role in regulating polysulfides (PS) redox in lithium-sulfur (Li-S) batteries. However, little effort has been devoted to understanding the relationship between the electronic state of metal oxides and a catalyst's properties in Li-S cells. Herein, defect-rich heterojunction electrocatalysts composed of ultrathin TiO2-x nanosheets and carbon nanotubes (CNTs) for Li-S batteries are reported. Theoretical simulations indicate that oxygen vacancies and heterojunction can enhance electronic conductivity and chemical adsorption. Spectroscopy and electrochemical techniques further indicate that the rich surface vacancies in TiO2-x nanosheets result in highly activated trapping sites for LiPS and lower energy barriers for fast Li ion mobility. Meanwhile, the redistribution of electrons at the heterojunction interfaces realizes accelerated surface electron exchange. Coupled with a polyacrylate terpolymer (LA132) binder, the CNT@TiO2-x-S electrodes exhibit a long cycle life of more than 300 cycles at 1 C and a high area capacity of 5.4 mAh cm(-2). This work offers a new perspective on understanding catalyst design in energy storage devices through band engineering.
The design of hollow PdO-Co3O4 nano-dodecahedrons with moderate catalytic activity for Li-O2 batteries

Yu Zhang,Jie Ma,Meng-Wei Yuan,Yang Li,Rong-An Shen,Weng-Chon Cheong,Tong Han,Gen-Ban Sun,Chen Chen,Cai-Yun Nan

DOI: https://doi.org/10.1039/c9cc03294k

2019-10-17

Abstract:Hollow PdO-Co3O4 nano-dodecahedrons with moderate catalytic activity were designed as electrocatalysts for Li-O2 batteries, and not only reduce the overpotentials effectively but also improve the reversibility of the ORR and OER, and cycle for more than 90 cycles stably with extremely low overpotentials.
Synthesis Of Porous Carbon Supported Palladium Nanoparticle Catalysts By Atomic Layer Deposition: Application For Rechargeable Lithium-O-2 Battery

Yu Lei,Jun Lu,Xiangyi Luo,Tianpin Wu,Peng Du,Xiaoyi Zhang,Yang Ren,Jianguo Wen,Dean J. Miller,Jeffrey T. Miller,Yang-Kook Sun,Jeffrey W. Elam,Khalil Amine

DOI: https://doi.org/10.1021/nl401833p

IF: 10.8

2013-01-01

Nano Letters

Abstract:In this study, atomic layer deposition (ALD) was used to deposit nanostructured palladium on porous carbon as the cathode material for Li-O-2 cells. Scanning transmission electron microscopy showed discrete crystalline nanoparticles decorating the surface of the porous carbon support, where the size could be controlled in the range of 2-8 nm and depended on the number of Pd ALD cycles performed. X-ray absorption spectroscopy at the Pd K-edge revealed that the carbon supported Pd existed in a mixed phase of metallic palladium and palladium oxide. The conformality of ALD allowed us to uniformly disperse the Pd catalyst onto the carbon support while preserving the initial porous structure. As a result, the charging and discharging performance of the oxygen cathode in a Li-O-2 cell was improved. Our results suggest that ALD is a promising technique for tailoring the surface composition and structure of nanoporous supports in energy storage devices.
In-situ deposition of Pd/Pd4S heterostructure on hollow carbon spheres as efficient electrocatalysts for rechargeable Li-O2 batteries

Xiaomeng Liu,Qishun Huang,Jun Wang,Lanling Zhao,Haoran Xu,Qing Xia,Deyuan Li,Lei Qian,Huaisheng Wang,Jintao Zhang

DOI: https://doi.org/10.1016/j.cclet.2020.11.003

IF: 9.1

2021-06-01

Chinese Chemical Letters

Abstract:The sluggish kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have always restricted the development of lithium oxygen batteries (LOBs). Herein, hollow carbon spheres loaded with Pd/Pd4S heterostructure (Pd/Pd4S@HCS) were successfully prepared via the in-situ deposition to improve the electrocatalytic activities for both ORR and OER in LOBs. With the well-dispersed Pd/Pd4S nanoparticles, the hierarchical composite with large specific surface area offers favorable transport channels for ions, electron and oxygen. Especially, the Pd/Pd4S nanoparticles could exhibit excellent electrochemical performance for ORR and OER due to their intrinsic catalytic property and interfacial effect from the heterostructure. Therefore, the LOBs with Pd/Pd4S@HCS as cathode catalyst show improved specific capacities, good rate ability and stable cycling performance.

chemistry, multidisciplinary
Rationalizing the effect of surface electronic structure on oxygen electrocatalyst for high performance lithium-oxygen battery

Longfei Ren,Li Wang,Dayue Du,Ruixin Zheng,Yu Yan,Miao He,Zhiqun Ran,Minglu Li,Chaozhu Shu

DOI: https://doi.org/10.1016/j.electacta.2022.139891

IF: 6.6

2022-03-01

Electrochimica Acta

Abstract:Lithium-oxygen (Li-O2) batteries show ultrahigh energy density compared with traditional Li-ion batteries. However, the high overpotential and the short cycle life need to be addressed before the practical application of this promising system. In this work, cerium doped cobalt nickel oxide Co2NiO4 (CCNO) is successfully prepared and studied as a high-performance catalyst for Li-O2 cells. The introduction of cerium contributes to form a large number of active sites on the catalyst surface and promotes the kinetics of oxygen redox reactions due to the modified electronic structure on the surface of CCNO nanowire array. Furthermore, the typical three-dimensional (3D) open architecture of CCNO promotes the mass transfer and thus further accelerates the electrochemical reactions. As expected, the cell based on CCNO electrode shows excellent electrochemical performance, including high discharge capacity of 9421.7 mA h g − 1 with a low overpotential of 0.59 V at a current density of 500 mA g − 1 and a long-term cycle life of more than 170 cycles. All these results clearly illustrate that cerium doping strategy provides new insights into the design of electrocatalysts for high-performance metal-air batteries.

electrochemistry
Selective Growth Of A Discontinuous Subnanometer Pd Film On Carbon Defects For Li-O-2 Batteries

Tao Zhang,Binghua Zou,Xuanxuan Bi,Matthew Li,Jianguo Wen,Fengwei Huo,Khalil Amine,Jun Lu

DOI: https://doi.org/10.1021/acsenergylett.9b02202

IF: 22

2019-01-01

ACS Energy Letters

Abstract:A high charge overpotential and poor cycle stability are the limiting factors in lithium-oxygen (Li-O-2) batteries, causing poor round-trip efficiency and cell failure. Many types of electrocatalysts have been explored to facilitate the oxygen evolution reaction (OER). However, even with the application of catalysts, it is still difficult to achieve stable operation as the carbon electrode (especially the defects) easily undergoes side reactions. To achieve high stability and round-trip efficiency, the rational design of OER catalysts and stable carbon electrodes are required. Herein, we employ a wet impregnation chemistry method to form a thin layer of palladium nanoparticles on the surface of carbon, which largely suppresses the side reaction through a selective coating on the carbon defect sites. Simultaneously, the Pd films serve as an electrocatalyst enabling the OER reaction with a very low overpotential. This rational design improves overall cell efficiency and extends the cycle life of the lithium-oxygen battery.
Enhanced electrochemical performance of Li-rich layered cathode materials by surface modification with P 2 O 5

mengyan hou,jinlong liu,shaoshuai guo,jun yang,congxiao wang,yongyao xia

DOI: https://doi.org/10.1016/j.elecom.2014.10.009

IF: 5.443

2014-01-01

Electrochemistry Communications

Abstract:Rate capability and charge/discharge coulombic efficiency of Li-rich layered oxides was greatly improved by surface modification with P2O5 through a gas–solid reaction. The P2O5 treatment results in forming a uniform nanoscale coating layer of ionically conductive Li3PO4 and spinel-like material on Li-rich layered oxide particles. The resulting material delivers a charge/discharge coulombic efficiency of 90% compared with 81% of the pristine sample during the first cycle. The treated electrode also exhibits improved rate capability with a reversible capacity of 148mAhg−1 at 4 C-rate vs. 269mAhg−1 at 0.1 C-rate between 2.0 and 4.8V.
Surface Engineering Donor and Acceptor Sites with Enhanced Charge Transport for Low-Overpotential Lithium–oxygen Batteries

Shu-Mao Xu,Xiao Liang,Xin Liu,Wen-Long Bai,Yu-Si Liu,Zhi-Peng Cai,Qiang Zhang,Chuan Zhao,Kai-Xue Wang,Jie-Sheng Chen

DOI: https://doi.org/10.1016/j.ensm.2019.10.032

IF: 20.4

2019-01-01

Energy Storage Materials

Abstract:Inferior charge transport in discharge products is one of the main factors restricting the technological potential of lithium-oxygen batteries. Here, we propose a strategy to enhance charge transport in discharge products by surface engineering of cathode catalysts with donor and acceptor sites to improve solid-solid interfacial electron transfer properties between catalysts and discharge products. Free-standing layered double oxides loaded with pyrolyzed sodium poly(aminobenzenesulfonate)-derived sulfur-doped carbon nanosheets and carbon nanosheets with sulfoxide groups are synthesized and utilized to investigate donor and acceptor sites effect on the performance of lithium-oxygen batteries. The free-standing cathode with hybrid donor and acceptor sites is capable of operation in oxygen with distinct (dis)charge plateau and superior cycling stability (over 60 cycles at a fixed capacity of 0.53 mAh cm−2). The superior properties are attributed to the enhanced charge transport in lithium peroxide by the formation of hole polarons/Li+ vacancies on acceptor sites and electron polarons/disordered lithium peroxide phase on donor sites. This work provides a promising route to enhance defective charge transport in discharge products by optimization of donor and acceptor sites on cathode catalysts for high-performance lithium-oxygen batteries.
Recent Progress of Transition Metal-Based Catalysts As Cathodes in O2/H2O-involved and Pure Li–CO2batteries

Jian Chen,Xiao-Yang Chen,Yang Liu,Yun Qiao,Shi-You Guan,Li,Shu-Lei Chou

DOI: https://doi.org/10.1039/d2ee03015b

IF: 32.5

2023-01-01

Energy & Environmental Science

Abstract:The composition, structure, reaction mechanism of transition metal-based catalysts and their effects on the electrochemical performance of Li-CO2cells were summarized, and some perspectives for the development of Li-CO2cells were put forward.
Cascaded orbital-oriented hybridization of intermetallic Pd<sub>3</sub>Pb boosts electrocatalysis of Li- O<sub>2</sub> battery

Yin Zhou,Qianfeng Gu,Kun Yin,Lu Tao,Yiju Li,Hao Tan,Yong Yang,Shaojun Guo

DOI: https://doi.org/10.1073/pnas.2301439120

2023-01-01

Abstract:Catalysts with a refined electronic structure are highly desirable for promoting the oxygen evolution reaction (OER) kinetics and reduce the charge overpotentials for lithium-oxy-gen (Li-O-2) batteries. However, bridging the orbital interactions inside the catalyst with external orbital coupling between catalysts and intermediates for reinforcing OER cata-lytic activities remains a grand challenge. Herein, we report a cascaded orbital-oriented hybridization, namely alloying hybridization in intermetallic Pd3Pb followed by intermo-lecular orbital hybridization between low-energy Pd atom and reaction intermediates, for greatly enhancing the OER electrocatalytic activity in Li -O-2 battery. The oriented orbital hybridization in two axes between Pb and Pd first lowers the d band energy level of Pd atoms in the intermetallic Pd3Pb; during the charging process, the low -lying 4d(xz/yz) and 4d(z)(2) orbital of the Pd further hybridizes with 2p* and 5s orbitals of lithium superoxide (LiO2) (key reaction intermediate), eventually leading to lower energy levels of antibonding and, thus, weakened orbital interaction toward LiO2. As a consequence, the cascaded orbital-oriented hybridization in intermetallic Pd3Pb considerably decreases the activation energy and accelerates the OER kinetics. The Pd3Pb-based Li-O-2 batteries exhibit a low OER overpotential of 0.45 V and superior cycle stability of 175 cycles at a fixed capacity of 1,000 mAh g(-1), which is among the best in the reported catalysts. The present work opens up a way for designing sophisticated Li -O-2 batteries at the orbital level.
Principle understanding towards synthesizing Fe/N decorated carbon catalysts with pyridinic-N enriched and agglomeration-free features for lithium-oxygen batteries

Gangning Zhang,Li Zhang,Shangqian Zhao,Shigang Lu,Yan Lu,Haobo Sun,Lve Wang

DOI: https://doi.org/10.1039/c9ra08207g

IF: 4.036

2020-01-01

RSC Advances

Abstract:Metal-N-decorated carbon catalysts are cheap and effective alternatives for replacing the high-priced Pt-based ones in activating the reduction of oxygen for metal-air or fuel cells. The preparation of such heterogeneous catalysts often requires complex synthesis processes, including harsh acid treatment, secondary pyrolysis processes, etching, etc., to make the heteroatoms evenly dispersed in the carbon substrates to obtain enhanced activities. Through combined experimental characterizations, we found that by precise control of the precursors added, a Fe/N uniformly distributed, agglomeration-free Fe/N decorated Super-P carbon material (FNDSP) can be easily obtained by a one-pot synthesis process with distinctly higher pyridinic-N content and elevated catalytic activity. An insight into this phenomenon was carefully demonstrated and also verified in Li-O-2 batteries, which delivered a high discharging platform of 2.85 V and can be fully discharged with a capacity of 5811.5 mA h g(carbon+catalyst)(-1) at the cut-off voltage of 2.5 V by the low-cost Super-P modified catalyst.
Recent advances in charge mechanism of noble metal-based cathodes for Li-O2 batteries

Yong Zhao,Jiahan Wu,Zhengguang Hu,Fengliang Liu,Li Wang,Honggen Peng,Wei Chen

DOI: https://doi.org/10.1016/j.cclet.2022.04.011

IF: 9.1

2022-04-01

Chinese Chemical Letters

Abstract:Lithium-oxygen (Li-O2) batteries are considered as the next generation for energy storages systems due to the higher theoretical energy density than that of Li-ion batteries. However, the high charge overpotential caused by the insulated Li2O2 results in low energy efficiency, side reaction from electrolyte and cathode, and therefore poor battery performance. Designing noble metal-based catalysts can be an effective strategy to develop high-performance Li-O2 batteries with low charge overpotentials and outstanding cycle stability. However, the charge mechanism for noble metal-based catalysts is not clear and even contradictory. Herein, several charge mechanisms of Li2O2 are first discussed. Subsequently, the possible charge processes of Li-O2 batteries with noble metal-based catalysts are illustrated. In addition, the future development for noble metal-based catalysts is outlined.

chemistry, multidisciplinary
Electrocatalytic Oxygen Reduction Reaction by the Pd/Fe-N-C Catalyst and Application in a Zn–Air Battery

Jiabao Chen,Zhongqing Wang,Chunxiang Yang,Guangchao Zou,Shuhua Liu,Zhiran Sun,Lei Wang,Rui Li,Konggang Qu,Wenjun Kang,Haibo Li

DOI: https://doi.org/10.3390/catal12121640

IF: 3.9

2022-12-15

Catalysts

Abstract:Developing a non-platinum catalyst that effectively catalyzes the oxygen reduction reaction (ORR) is highly significant for metal–air batteries. Metal and nitrogen co-doped carbons (M-N-Cs) have emerged as alternative candidates to platinum. In this work, dual-metal Pd/Fe-N-C electrocatalysts were synthesized by the one-step pyrolysis of phytic acid, melamine, and Pd/Fe-based salts. The Pd/Fe-N-C catalyst exhibited a good catalytic ability during the ORR process and outperformed the commercial Pt/C catalyst as regards mass activity, catalytic stability, and methanol tolerance. It was found that Pd-Nx is the active center, and the synergistic effect from the Fe component introduction endowed the Pd/Fe-N-C with an excellent catalytic performance towards the ORR. When assembled into a Zn–air battery, its specific capacity was ~775 mAh gZn−1. Meanwhile, the peak power density could reach 3.85 W mgPd−1, i.e., 3.4 times that of the commercial Pt/C catalyst (1.13 W mgPt−1). This implies that the Pd/Fe-N-C catalyst has potential applications in metal–air batteries.

chemistry, physical
Improved Cyclability of Lithium–Oxygen Batteries by Synergistic Catalytic Effects of Two-Dimensional MoS2 Nanosheets Anchored on Hollow Carbon Spheres

Anjun Hu,Chaozhu Shu,Xuemei Qiu,Minglu Li,Ruixin Zheng,Jianping Long

DOI: https://doi.org/10.1021/acssuschemeng.8b06496

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:The design and development of high-efficient electrocatalysts plays a decisive role in improving the stability of lithium-oxygen (Li-O-2) batteries. Here, two-dimensional (2D) MoS2 nanosheets anchored on hollow carbon spheres (MoS2/HCS) composites is designed and reported as promising cathode catalysts for Li-O-2 batteries. The MoS2/HCS-based Li-O-2 battery shows superior electrochemical performance, in terms of high capacity (4010 mA h g(-1)) and enhanced cycling performance (104 cycles). X-ray photoelectron spectroscopy (XPS) results reveal that the formation of Li2CO3 and other side products can be effectively alleviated when MoS2/HCS electrode is used as the cathode. On the basis of experimental studies, it is found that the synergistic effects, which originated from the superior catalytic property of MoS2 nanosheets and the good electrical conductivity of HCS with high surface area, is the main reason for performance improvement. The synergistic effects induced by the dispersed MoS2 nanosheets anchored on nanostructured HCS cathodes provide a promising strategy for developing catalysts of O-2 electrode for Li-O-2 batteries with excellent performance.

Enhanced Electrochemical Performance of Li–O2 Battery Based on Modifying the Solid-State Air Cathode with Pd Catalyst

Perovskite Sr0.9Y0.1CoO3-delta Nanorods Modified with CoO Nanoparticles as a Bifunctional Catalyst for Rechargeable Li-O-2 Batteries

Oxygen-enriched carbon material for catalyzing oxygen reduction towards hybrid electrolyte Li-air battery

Pd Nanoparticles on Zno-Passivated Porous Carbon by Atomic Layer Deposition: an Effective Electrochemical Catalyst for Li-O-2 Battery

Effect of oxygen adsorbability on the control of Li2O2 growth in Li-O2 batteries: Implications for cathode catalyst design

Optimization of Oxygen Electrode Combined with Soluble Catalyst to Enhance the Performance of Lithium–oxygen Battery

An in Situ Formed Pd Nanolayer As A Bifunctional Catalyst for Li-Air Batteries in Ambient or Simulated Air

Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering

The design of hollow PdO-Co3O4 nano-dodecahedrons with moderate catalytic activity for Li-O2 batteries

Synthesis Of Porous Carbon Supported Palladium Nanoparticle Catalysts By Atomic Layer Deposition: Application For Rechargeable Lithium-O-2 Battery

In-situ deposition of Pd/Pd4S heterostructure on hollow carbon spheres as efficient electrocatalysts for rechargeable Li-O2 batteries

Rationalizing the effect of surface electronic structure on oxygen electrocatalyst for high performance lithium-oxygen battery

Selective Growth Of A Discontinuous Subnanometer Pd Film On Carbon Defects For Li-O-2 Batteries

Enhanced electrochemical performance of Li-rich layered cathode materials by surface modification with P 2 O 5

Surface Engineering Donor and Acceptor Sites with Enhanced Charge Transport for Low-Overpotential Lithium–oxygen Batteries

Recent Progress of Transition Metal-Based Catalysts As Cathodes in O2/H2O-involved and Pure Li–CO2batteries

Cascaded orbital-oriented hybridization of intermetallic Pd<sub>3</sub>Pb boosts electrocatalysis of Li- O<sub>2</sub> battery

Principle understanding towards synthesizing Fe/N decorated carbon catalysts with pyridinic-N enriched and agglomeration-free features for lithium-oxygen batteries

Recent advances in charge mechanism of noble metal-based cathodes for Li-O2 batteries

Electrocatalytic Oxygen Reduction Reaction by the Pd/Fe-N-C Catalyst and Application in a Zn–Air Battery

Improved Cyclability of Lithium–Oxygen Batteries by Synergistic Catalytic Effects of Two-Dimensional MoS2 Nanosheets Anchored on Hollow Carbon Spheres