Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Micro/Nano Gas Sensors: A New Strategy Towards In-Situ Wafer-Level Fabrication of High-Performance Gas Sensing Chips

Wafer-level fabricated high-performance micro/nano gas sensor

Wafer-Level Patterning of SnO Nanosheets for MEMS Gas Sensors

Ultra High Performance Gas Sensor Based on IC Compatible Fusion of Micromachined Hotplatform and Nanostructured Porous Film

Microheater Integrated Nanotube Array Gas Sensor for Parts-Per-Trillion Level Gas Detection and Single Sensor-Based Gas Discrimination

Fast-Response, Sensitivitive and Low-Powered Chemosensors by Fusing Nanostructured Porous Thin Film and IDEs-Microheater Chip

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Controllably Fabricated Single Microwires from Pd-WO3•xH2O Nanoparticles by Femtosecond Laser for Faster Response Ammonia Sensors at Room Temperature

Integration of SnO2 Nanoparticles with Micro-hotplatform for Low-power-consumption Gas Sensors

Design and Fabrication of Micro-Nano Fusion Gas Sensor Based on Two-Beam Micro-Hotplatform

A Novel Approach to Fabricate Metal Oxide Nanowire-Like Networks Based Coplanar Gas Sensors Array for Enhanced Selectivity

Micro-heater Embedded Ni-SnO2 Ordered Nanoporous Films: On-chip Fabrication for Fast, Sensitive, and Selective Gas Sensing Towards Multiple VOCs for Air Quality Monitoring

Micro-heater Embedded Ni-SnO 2 Ordered Nanoporous Films: On-chip Fabrication for Fast, Sensitive, and Selective Gas Sensing towards Multiple VOCs for Air Quality Monitoring

High-performance PANI sensor on silicon nanowire arrays for sub-ppb NH3 detection

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

Scalable fabrication of in-plane microscale self-powered integrated systems for fast-response and highly selective dual-channel gas detection

Rational design of sub-parts per million specific gas sensors array based on metal nanoparticles decorated nanowire enhancement-mode transistors.

An In2O3 Nanowire-Like Network Fabricated on Coplanar Sensor Surface by Sacrificial CNTs for Enhanced Gas Sensing Performance

Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Well-connected ZnO Nanoparticle Network Fabricated by In-Situ Annealing of ZIF-8 for Enhanced Sensitivity in Gas Sensing Application

An Integrated Gas Sensor Technology Using Surface Micro-Machining