Abstract:Thanks to wavelength flexibility, interferometric filters such as Fabry-Perot interferometers (FPIs) and field-widened Michelson interferometers (FWMIs) have shown great convenience for spectrally separating the molecule and aerosol scattering components in the high-spectral-resolution lidar (HSRL) return signal. In this paper, performance comparisons between the FPI and FWMI as a spectroscopic discrimination filter in HSRL are performed. We first present a theoretical method for spectral transmission analysis and quantitative evaluation on the spectral discrimination. Then the process in determining the parameters of the FPI and FWMI for the performance comparisons is described. The influences from the incident field of view (FOV), the cumulative wavefront error induced by practical imperfections, and the frequency locking error on the spectral discrimination performance of the two filters are discussed in detail. Quantitative analyses demonstrate that FPI can produce higher transmittance while the remarkable spectral discrimination is one of the most appealing advantages of FWMI. As a result of the field-widened design, the FWMI still performs well even under the illumination with large FOV while the FPI is only qualified for a small incident angle. The cumulative wavefront error attaches a great effect on the spectral discrimination performance of the interferometric filters. We suggest if a cumulative wavefront error is less than 0.05 waves RMS, it is beneficial to employ the FWMI; otherwise, FPI may be more proper. Although the FWMI shows much more sensitivity to the frequency locking error, it can outperform the FPI given a locking error less than 0.1 GHz is achieved. In summary, the FWMI is very competent in HSRL applications if these practical engineering and control problems can be solved, theoretically. Some other estimations neglected in this paper can also be carried out through the analytical method illustrated herein.

Optical FIR Filter Based on Crystal Birefringence: Theory and Experimental Investigation

Study on Optical Finite Impulse Response Filter

Optical Finite Impulse Response Filter Design Based on Crystal Birefringence

Enhanced superprism effect based on positive/negative lateral shift of reflective beam in a Fabry-Perot filter.

Optical Thin-Film Reflection Filters Based on the Theory of Photonic Crystals.

Particle Swarm Optimization-Based Approach for Optical Finite Impulse Response Filter Design.

The Performance of Optical Low-Pass Filter

Preparation of New Crystal 2-D Optical Low Pass Filter

Analysis of structure design of optical low pass filter

Optimization and Test of Two-Dimensional Birefringent Low-Pass Filter

Study Of Modular Transfer Function-Based Optieal Low-Pass Filter Evaluation Model And Experiment

Application and Research of Harmonic Diffractive/Refractive Optics in Visible Spectrum

Comparisons Between Field-Widen Michelson Interferometer and Fabry-Perot Interferometer As the Spectroscopic Filter in High Spectral Resolution Lidar

High-Q Filters Based on One-Dimensional Photonic Crystals Using Epsilon-Negative Materials

Investigation on Spectra of Prism‐coupled Microdisk Resonator

Free-spectral-range-free Filters with Ultrawide Tunability Across the S + C + L Band

Optimum Design of 2-D Lowpass FIR Filters for Image Processing Based on A New Algorithm

Architecture of High-Order All-Fiber Birefringent Filters by the Use of the Sagnac Interferometer

Tunable Liquid Crystal Fabry-Perot Filter for Dense Wavelength Division Multiplexing System

Bandwidth and Center Wavelength Tunable Micro-Ring Optical Filter with Vernier Effect by Four Spectrum Combination

Design and Implementation of FIR Filter by Reconfigurable FPGAs for the Multiwavelength Optical Storage System