Kinematic Optimal Design of a Spatial 3-DOF Parallel Manipulator

Xin-Jun Liu,Jinsong Wang

DOI: https://doi.org/10.1007/978-3-642-36929-2_9

2013-01-01

Abstract:This chapter provides a case study for the kinematic optimal design of a spatial 3-DOF (two translations and one rotation) parallel manipulator. The final design of the manipulator is used for a module of a five-axis hybrid kinematic machine developed at Tsinghua University.

What problem does this paper attempt to address?

Optimal kinematic design of a three translational DoFs parallel manipulator

LiuXin-Jun

IF: 2.7

2006-01-01

Robotica

Abstract:In this paper, an optimal kinematic design method of a three translational DoFs parallel manipulator is presented. The design is based on the concept of performance chart, which can show the relati...
Optimal Kinematic Design of a 2-DOF Planar Parallel Manipulator

Wu Jun,Li Tiemin,Liu Xinjun,Wang Liping

DOI: https://doi.org/10.1016/s1007-0214(07)70040-8

2007-01-01

Abstract:Closed-form solutions were developed to optimize kinematics design of a 2-degree-of-freedom (2-DOF) planar parallel manipulator. The optimum design based on the workspace was presented. Meanwhile, a global, comprehensive conditioning index was introduced to evaluate the kinematic designs. The optimal parallel manipulator is incorporated into a 5-DOF hybrid machine tool which includes a 2-DOF rotational milling head and a long movement worktable. The results show that the planar parallel manipulator-based machine tool can be successfully used to machine blades and guide vanes for a hydraulic turbine.
Optimal Kinematic Design and Application of a Redundantly Actuated 3DOF Planar Parallel Manipulator

Jun Wu,Jinsong Wang,Liping Wang

DOI: https://doi.org/10.1115/1.2890118

2008-01-01

Journal of Mechanical Design

Abstract:This paper addresses optimal kinematic design and application of a redundantly actuated parallel manipulator with 3DOFs. Based on the kinematic model, the Jacobian matrix is derived and then transferred to a uniform form such that the conditioning index has explicit physical meaning. Based on the task workspace, the width between two columns is determined Then, a comprehensive performance index, which compromises the conflict between workspace utilization performance measure and conditioning index, is proposed for the optimum design. The parallel manipulator is incorporated into a 4DOF hybrid machine tool, which also includes a feed worktable. Furthermore, a 5DOF machine tool is created by combining the parallel manipulator with a 2DOF worktable to machine blades of gas turbines.
Optimal Kinematic Design of a Planar Parallel Manipulator with High Speed and High Precision

Juan Li,Yanjie Liu,Chenqi Wang,Lining Sun

DOI: https://doi.org/10.1109/icma.2006.257523

2008-01-01

Abstract:This paper introduces a novel 2-DOF high speed and high precision planar parallel manipulator. The manipulator consists of a moving platform that is connected to a fixed base by two limbs. Each limb is made up of one prismatic and four revolute joints and the two prismatic axes are arranged orthogonally. In contrast to conventional XY-tables, the manipulator investigated herein doesn't need decoupling structure. In this paper, firstly, the optimal configuration of the manipulator is obtained based on the condition number. Secondly, for the optimal configuration, the forward and inverse kinematic equations are derived, and the singularity of the manipulator is analysed. Then, the optimal shape and position of workspace is obtained based on the global performance index. Finally, the dimension optimization design is performed according to the optimization objective function, which considers the global condition index and workspace
Optimal kinematic design of a new 3-DOF planar parallel manipulator for pick-and-place applications

Liao Bin,Lou Yunjiang

DOI: https://doi.org/10.1109/ICMA.2012.6283261

2012-01-01

Abstract:This paper presents an optimal kinematic design of a new 3-DOF planar parallel manipulator for pick-and-place operations. After reviewing existing architectures of high-speed and high-acceleration parallel manipulators, a new design of 3-DOF parallel manipulator is presented with a co-axis actuated joints arrangement and three subchains in parallel planes. First, the loop-closure equations of the robot are derived. The inverse kinematics and singularity analysis are discussed. After that, the index of the average inverse condition number is used for design. For kinematics, velocities are important for pick-and-place applications. Bounded velocities indices are also used to limit the lengths of the links. Finally, the result of the optimal design has been analyzed. This optimal method can be applied to other manipulators for pick-and-place operations.
Kinematics and Optimal Design of a Novel 3-Dof Parallel Manipulator for Pick-and-place Applications

Bin Liao,Yunjiang Lou,Zexiang Li

DOI: https://doi.org/10.1504/ijma.2013.055614

2013-01-01

International Journal of Mechatronics and Automation

Abstract:In this paper, a novel 3-degree-of-freedom planar parallel manipulator, the V3 robot, is introduced. The manipulator consists of three revolute joint) subchains, which are respectively arranged in three-parallel planes. The three-actuated joints are designed to have a common rotation axis, which contributes the large workspace and unlimited rotational capability of the robot. The kinematics, including the loop-closure equations, the inverse kinematics, singularity, and workspace are briefly analysed. By directly considering the velocity and the accuracy indices for pick and place operations, the optimal design problem is formulated to maximise the good performance workspace, where lower bounds on the average extreme velocity and upper bounds on the average extreme error are applied as constraints. The optimal design shows greatly improved performance in workspace, velocity, and accuracy.
A general approach for optimal kinematic design of parallel manipulators

Lou YJ,Liu GF,Xu JJ,Li ZX

DOI: https://doi.org/10.1109/ROBOT.2004.1308827

2004-01-01

Abstract:This paper deals with the problem of optimal geometry design of parallel manipulators. In order to reduce the main drawbacks of parallel manipulators, relatively small workspace and more singularities, two requirements, workspace and condition number, are considered. The design problem is thus formulated to find a parallel mechanism such that its Cartesian workspace contains a prescribed workspaces with good condition numbers in it. By observing that those requirements can be locally cast into Linear Matrix Inequalities (LMIs), we formulate the design problem locally as a convex optimization problem subject to LMIs with a max-det function as its objective function. Hence, at each node of discretized space of design parameters, there is an LMI-based convex optimization problem. A two-level algorithm can be applied to solve for a set of optimal design parameters: (1) Discretize the space of design parameters into a set of discrete nodes; (2) At each node the Newton algorithm is applied to solve the max-det optimization problem. By comparing all the locally optimal costs, we can obtain a corresponding set of globally optimal design parameters correspondingly. Simulation results verify the effectiveness of the proposed approach.
Design And Kinematics Of A Novel Three Dof Parallel Manipulator

Ketao Zhang,Yuefa Fang,Chuangfeng Huai

2007-01-01

Abstract:A novel 3-DOF parallel manipulator is presented that can be found in a cube paper fold, based on the concept of mechanisms. The parallel manipulator consists of a base plate, a movable platform, and four connecting legs. The moving platform has three degrees of freedom, which are two degrees of rotational freedom and one degree of translational freedom, with respect to the base plate. Each of the connecting leg contains a closed-loop subchain, which is symmetrical six-bar spherical metamorphic mechanism. The new parallel manipulator is very interesting for the reason of only revolute joint architecture, identical limb kinematic chain and symmetrical structure. The configuration design of the new parallel manipulator is introduced. The concept of generalized kinematic pair and screw theory are applied to the mobility analyses of the novel parallel manipulator. And the analysis results provide information on motion characteristics of the parallel manipulator. The inverse and forward kinematics problems are described. The proposed manipulator has a wide application in the fields of industrial robots, simulators, micro-motion manipulators, and parallel kinematics machines.
Optimization Design of a Novel 4-DOF Parallel Manipulator

Tianrui Xu,Jun Wu,Binbin Zhang

DOI: https://doi.org/10.1109/cyber46603.2019.9066638

2019-01-01

Abstract:This paper deals with optimization design of a novel 4-DOF parallel manipulator with 4 chains and 2 moving platforms. The linear motion between the moving platforms can be transformed into the rotary motion of the end effector. Based on the kinematic model, the dynamic model is derived by using the principle of virtual work. The workspace volume, error transfer characteristic, dexterity and stiffness evaluation indexes are investigated. Using univariate search technique, the multi-objective optimization is conducted and the optimal structure size ratio is solved.
Optimal Design of a Novel High Speed and High Precision 3-DOF Manipulator

P Lan,ML Liu,NL Lu,QY Ding

DOI: https://doi.org/10.1109/icmech.2005.1529344

2005-01-01

Abstract:A novel 3-DOF high speed and high precision manipulator, which combines direct driven planar parallel mechanism and linear actuator, is introduced. Through adding some constraints, workspace with well kinematics performance can be generated, and the optimization of geometric parameter is carried out in terms of a new performance index composed of speed and dexterity. Design study then is carried out in the software ADAMS environment to analyze the approximate design sensitivity of the variable; that is, the effects of parameter of each beam cross sectional area and relative position of linear actuator on model performance. Several conclusions are then drawn on the appropriate way of dynamics optimization to get a lightweight and small deformation manipulator. Dynamics simulation of an improved planar parallel mechanism with different cross section and another unrefined one are compared. The stiffness of them is almost equal, but the mass of the improved one decreases 30 percent compared with the initial one. That means this way of optimization is efficient
A New Method for Optimum Design of Parallel Manipulator Based on Kinematics and Dynamics

Jun Wu,Liping Wang,Zheng You

DOI: https://doi.org/10.1007/s11071-010-9682-x

IF: 5.741

2010-01-01

Nonlinear Dynamics

Abstract:This paper presents a new method for the optimum design of parallel manipulators by taking both the kinematics and dynamic characteristics into account. The optimum design of a 3-DOF 4-RRR planar parallel manipulator with actuation redundancy is investigated to demonstrate the method. The kinematic performance indices such as the conditioning index, the velocity index, and workspace area are analyzed. Further, the dynamic dexterity, which is used to evaluate the dynamic characteristics, is investigated. The corresponding atlases are represented graphically in the established design space. Based on these atlases, the geometrical parameters without dimension are determined. Then the optimum dimensional parameters are achieved based on the optimum non-dimensional result. By using the method proposed in this paper, the designer can obtain the optimum result with respect to both kinematic performance indices and dynamic performance indices. Since the dynamic performance is considered in the process of optimum design by using the method proposed in this paper, it is expected to realize the high dynamics of parallel manipulators.
Optimal Kinematic Design of 2-DOF Parallel Manipulators with Well-Shaped Workspace Bounded by a Specified Conditioning Index

T Huang,M Li,ZX Li,DG Chetwynd,DJ Whitehouse

DOI: https://doi.org/10.1109/tra.2004.824690

2004-01-01

IEEE Transactions on Robotics and Automation

Abstract:This paper presents a hybrid method for the optimum kinematic design of two-degree-of-freedom (2-DOF) parallel manipulators with mirror symmetrical geometry. By taking advantage of both local and global approaches, the proposed method can be implemented in two steps. In the first step, the optimal architecture, in terms of isotropy and the behavior of the direct Jacobian matrix, is achieved, resulting in a set of closed-form parametric relationships that enable the number of design variables to be reduced. In the second step, the workspace bounded by the specified conditioning index is generated, which allows only one design parameter to be determined by optimizing a comprehensive index in a rectangular workspace. The kinematic optimization of a revolute-jointed 2-DOF parallel robot has been taken as an example to illustrate the effectiveness of this approach.
Inverse kinematics and dynamics of a 3-DOF spatial parallel manipulator

Jianxin Yang,Ben Zhao,Chunli Li

DOI: https://doi.org/10.4028/www.scientific.net/AMM.229-231.2280

2012-01-01

Applied Mechanics and Materials

Abstract:Recently the parallel manipulator with less DOFs has attracted industry and academia, but the research on its dynamics is still an open problem. In this paper, the inverse dynamic of a spatial parallel manipulator with two translational degrees of freedom and one rotational degree of freedom is studied based on the Newton-Euler approach. The kinematics analysis is firstly performed in a closed form. The inverse dynamic equation of this manipulator is formulated by using the Lagrange multiplier approach and choosing the Cartesian position and orientation as the generalized coordinates. Finally a numerical example is given for the kinematic and dynamic simulation of this manipulator. The model will be useful to improve the design of the mechanical components and the control algorithm. © (2012) Trans Tech Publications, Switzerland.
Determination of the Link Lengths for a Spatial 3-DOF Parallel Manipulator

Xin-Jun Liu,Jinsong Wang,Jongwon Kim

DOI: https://doi.org/10.1115/1.2159028

2006-01-01

Journal of Mechanical Design

Abstract:This paper addresses the issue of determining the optimal geometric parameters of a 3-DOF parallel manipulator One of the advantages of the manipulator is that the moving platform exhibits high tilting capabilities, e.g., as much as +/- 50 deg. The first step of the new optimal methodology proposed in this paper to achieve the optimum design involves developing a design space that includes all possible basic similarity manipulators. The next step deals with the graphical representation of atlases that can illustrate relationships between performance criteria and design parameters. With such atlases, the designer can identify an optimum region with respect to the specification on performances. The region contains the optimum candidates, from which we can select one directly. Finally, the geometric parameters of the manipulator can be reached by comparing the desired workspace and the good-conditioning workspace. The design methodology discussed in this paper has no process to establish the objective function and does not involve any optimization algorithm, which is normally used in traditional optimization. We expect that since each manipulator in the developed design space represents all of its similarity manipulators in terms of performances, this method will guarantee an optimum design result.
A General Approach for Optimal Design of Parallel Manipulators

Y. J. Lou,G. F. Liu,Z. X. Li

2005-01-01

Abstract:This work intends to deal with the optimal kinematic synthesis problem of parallel manipulators. A unified framework is proposed for optimal design of parallel manipulators. By observation that regular (e.g., hyperrectangular) workspaces are desirable for most machines, we propose the concept of effective regular workspace, which reflects both requirements on the workspace shape and quality. Dexterity index is utilized to characterize the effectiveness of the workspace. Other performance indices, such as manipulability, stiffness, and minimal natural frequency, can be readily included. The optimal design problem is then formulated to find a manipulator geometry that maximizes the effective regular workspace. Since the optimal design problem is a constrained nonlinear optimization problem without explicit analytical expression, the controlled random search (CRS) technique, which was reported robust and reliable, is applied to numerically solve the problem. Some typical parallel manipulators, the five-bar parallel linkage, the 3RRR planar parallel manipulator, the rotational DELTA robot, and the Stewart-Gough platform are employed as examples to demonstrated the design procedure.
Kinematics, dynamics and dimensional synthesis of a novel 2-DoF translational manipulator

Xin-Jun Liu,Qi-Ming Wang,Jinsong Wang

DOI: https://doi.org/10.1007/s10846-005-3507-z

2005-01-01

Abstract:In the past few years, parallel manipulators have become increasingly popular in industry, especially, in the field of machine tools. In this paper, a novel 2-degree-of-freedom (DoF) parallel manipulator, which has two translational DoFs, is proposed. It is characterized by the fact that the output of the manipulator is two planar DoFs of a rigid body, while its orientation remains constant. The inverse and forward kinematics can be described in closed form. The velocity equation, singularity, and workspace of the manipulator are presented. In addition the inverse dynamics problem of the device is investigated employing the Lagrange multipliers approach. The dimensional synthesis based on the workspace and conditioning indices is presented. The proposed manipulator can be applied to the field of machine tools or used as the mobile base for a spatial manipulator. The results of the paper are very useful for the design and application of the new manipulator.
A New Spatial Three-Dof Parallel Manipulator with High Rotational Capability

XJ Liu,J Kim

DOI: https://doi.org/10.1109/tmech.2005.856219

2005-01-01

Abstract:This paper concerns the proposal and analysis of a novel spatial parallel manipulator. The parallel manipulator consists of a base plate, a movable platform, and three connecting legs. The moving platform has three degrees of freedom (DoFs), which are two degrees of translational freedom and one degree of rotational freedom, with respect to the base plate. The inverse and forward kinematics problems are described in closed forms and the velocity equation of the new parallel manipulator is given. Three kinds of singularities are presented. The workspace for the manipulator is analyzed systematically. Especially, the indices to evaluate the rotational capability of the moving platform of the manipulator will be defined and discussed in detail. Due to the high rotational capability performance, the proposed manipulator has wide application in the fields of industrial robots, simulators, micromotion manipulators, and parallel kinematic machines.
Analysis and optimal design of a spherical parallel manipulator with three rotational degrees of freedom

Li Bing,Chen Shucan,Zhang Dan

DOI: https://doi.org/10.1007/978-3-642-39223-8_7

2013-01-01

Abstract:Spherical parallel manipulators with three rotational degrees of freedom have been widely researched for a long time, and many mechanisms have been proposed and designed for some specific tasks. In this paper, the concept design of a spherical parallel manipulator with three rotational degrees of freedom is presented. The optimal design of this type of parallel mechanism with a 3SPU-1S kinematic chain is detailed which can act as a haptic device, and the purpose of the optimal design is to find a set of parameters that achieve a relatively good performance in terms of three important indexes, that is, to define the tradeoff among the workspace capabilities, dexterity and stiffness. First, the inverse kinematic equations and Jacobian matrix of the spherical parallel manipulator are formulated, which is the necessary for subsequent analysis. Then, three important performance is analyzed. Finally, the dimensional synthesis based on a compound performance index is introduced and simulation results are obtained. © Springer-Verlag Berlin Heidelberg 2013.
A Novel Spatial Three Degrees of Freedom Parallel Manipulator

Xin-Jun Liu,Jinsong Wang,Li-Ping Wang,Qiming Wang

DOI: https://doi.org/10.1016/S1474-6670(17)34311-2

2001-01-01

IFAC Proceedings Volumes

Abstract:In this paper, a new spatial three degree-of-freedom, that are two degrees of translational freedom and one degree of orientational freedom, parallel manipulator is proposed. The parallel manipulator consists of a base plate, a movable platform, and three connecting legs. The kinematics problems and velocity equation of the new parallel manipulator are given. The three kinds of singularities are presented. The parallel manipulator has wide application in the fields of industrial robots, simulators, micromanipulators, and parallel kinematics machines.

Kinematic Optimal Design of a Spatial 3-DOF Parallel Manipulator

Optimal kinematic design of a three translational DoFs parallel manipulator

Optimal Kinematic Design of a 2-DOF Planar Parallel Manipulator

Optimal Kinematic Design and Application of a Redundantly Actuated 3DOF Planar Parallel Manipulator

Optimal Kinematic Design of a Planar Parallel Manipulator with High Speed and High Precision

Optimal kinematic design of a new 3-DOF planar parallel manipulator for pick-and-place applications

Kinematics and Optimal Design of a Novel 3-Dof Parallel Manipulator for Pick-and-place Applications

A general approach for optimal kinematic design of parallel manipulators

Design And Kinematics Of A Novel Three Dof Parallel Manipulator

Optimization Design of a Novel 4-DOF Parallel Manipulator

Optimal Design of a Novel High Speed and High Precision 3-DOF Manipulator

A New Method for Optimum Design of Parallel Manipulator Based on Kinematics and Dynamics

Optimal Kinematic Design of 2-DOF Parallel Manipulators with Well-Shaped Workspace Bounded by a Specified Conditioning Index

Inverse kinematics and dynamics of a 3-DOF spatial parallel manipulator

Determination of the Link Lengths for a Spatial 3-DOF Parallel Manipulator

A General Approach for Optimal Design of Parallel Manipulators

Kinematics, dynamics and dimensional synthesis of a novel 2-DoF translational manipulator

A New Spatial Three-Dof Parallel Manipulator with High Rotational Capability

Analysis and optimal design of a spherical parallel manipulator with three rotational degrees of freedom

A Novel Spatial Three Degrees of Freedom Parallel Manipulator