Abstract:The global microturbine market will grow at an interesting Compound Annual Growth Rate during the period 2016-2020 and a key driver will be distributed generation also with unconventional fuels. This paper compares the performances of two different microturbine based technologies for biomass micro CHP. One is the Integrated Pyrolysis Regenerated Plant (IPRP), technology developed by the authors by coupling a pyrolyzer to a mGT fuelled by biomass pyrolysis gas. Two IPRP versions are considered: one in which char is burned to provide pyrolysis energy and one in which it is used as a carbon sink. The second technology is the Externally Fired Gas Turbine (EFGT) based on biomass combustion in a dedicated burner and high temperature heat exchangers used to heat up compressed air which expands in the mGT. Hot air at the turbine exhaust is used as combustion air for biomass. The layout and operational conditions considered were optimized by the authors in previous works. The environmental performance of the two technologies when fuelled with the same biomass at the same power output, is assessed through a Life Cycle Assessment (LCA) analysis, calculating impacts on acidification, carbon footprint and Cumulative Energy Demand (CED). Two sensitivity analysis are also performed on different vegetal oils used for scrubbing and different methods of allocation, referred to CHP products.Results show that both technologies have negative carbon footprints, however the IPRP has the worst performance because of the sunflower oil, used for syngas scrubbing, which offsets the additional carbon sink benefit of biochar. If water it used as a scrubbing medium in the IPRP plant, this configuration obtains similar results in terms of environmental impact, compared to IPRP plant using vegetable oil as a scrubbing medium. However, when the effect of a different vegetal oil is considered, namely a waste frying oil, the former introduces extraordinary benefits resulting in the IPRP outperforming the EFmGT in terms of carbon negative technology.

Cfd Simulation Of Biomass Pyrolysis Syngas Vs. Natural Gas In A Microturbine Annular Combustor

Cfd Simulation Of A Microturbine Annular Combustion Chamber Fueled With Methane And Biomass Pyrolysis Syngas - Preliminary Results

Numerical Analysis of a Microturbine Combustion Chamber Modified for Biomass Derived Syngas

Numerical Analysis of Biomass-Derived Gaseous Fuels Fired in A Rql Micro Gas Turbine Combustion Chamber - Preliminary Results.

Cfd Analysis Of An Annular Micro Gas Turbine Combustion Chamber Fuelled With Liquid Biofuels. Preliminary Results With Bioethanol

Gas Turbines Fired with Biomass Pyrolysis Syngas: Analysis of the Overheating of Hot Gas Path Components

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Design and Preliminary Operation of a Gasification Plant for Micro-CHP with Internal Combustion Engine and SOFC

Experimental And Cfd Evaluation Of The Part Load Performance Of A Micro Gas Turbine Fuelled With Ch4-N-2 Mixtures

The Effects of Syngas Composition on Engine Thermal Balance in a Biomass Powered CHP Unit: A 3D CFD Study

Biomass Microturbine Based Efgt And Iprp Cycles: Environmental Impact Analysis And Comparison

Micro Scale Slow-Pyrolysis Rotary Kiln for Syngas and Char Production from Biomass and Waste: Design and Construction of a Reactor Test Bench

Modelling the biomass updraft gasification process using the combination of a pyrolysis kinetic model and a thermodynamic equilibrium model

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Improving Lifetime and Manufacturability of an Rql Combustor for Microturbines: Design and Numerical Validation

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

Geometry Optimization of a Commercial Annular RQL Combustor of a Micro Gas Turbine for Use with Natural Gas and Vegetal Oils

Numerical and experimental investigation of microturbine combustion chamber performance and emissions through biogas consumption with varied component ratios

Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels

Computational analysis of multi-fuel micro-gas turbine annular combustion chamber