Abstract:Regularized ply block shape. This paper designs and optimizes a new structure hybrid material B‐pillar assembly. Establish a finite element analysis model for the side impact test of an electric vehicle to verify the model's accuracy. Construct a finite element model of the hybrid material B‐pillar assembly. Combined with the static performance analysis of the B‐pillar, the laminate design of the carbon fiber composite B‐pillar reinforcement plate and optimization. For the outer and inner panels of the B‐pillar, the surrogate model method and the multiobjective optimization method are combined to set 11 design variables and 13 responses. The optimal Latin hypercube design method was used to randomly sample each design variable and fit the radial basis function (RBF) approximate model. The modified second‐generation non‐dominated sorting genetic algorithm (MNSGA‐II) was used to carry out multiobjective optimization of the mixed material B‐pillar assembly, and the multicriteria decision‐making method was used to obtain the optimal solution for the Pareto solution set. A drop weight impact test was performed on the hybrid material B‐pillar assembly. The results showed that the peak collision force of the hybrid material B‐pillar was reduced by 43.7% compared with the original steel B‐pillar, the specific energy absorption was increased by 17.5%, and the side impact safety performance was better. After optimization, the weight of the mixed material B‐column was reduced by 26.44%. The improvement rates of the intrusion amount at P2 and the intrusion speed at P1 were 23.99% and 0.63%, respectively, and the lightweight effect and side impact safety were significantly improved. Highlights The finite element analysis parameters of carbon fiber composite materials were constructed through experiments, and the basis for simulation analysis under various working conditions of the B‐pillar based on performance‐driven optimization was established. A hybrid material B‐pillar design method is proposed, which consists of a variable‐thickness high‐strength steel B‐pillar outer plate, a variable‐thickness high‐strength steel B‐pillar inner plate, and a carbon fiber composite B‐pillar reinforcement plate. The super layer of the carbon fiber composite B‐pillar reinforcement plate was optimized and the laying plan of the carbon fiber composite B‐pillar reinforcement plate was determined. Performance‐driven optimization is adopted to realize the collaboration of multilevel design and optimization methods such as B‐pillar conceptual design, detailed design, and multiobjective optimization. A modified NSGA‐II algorithm was proposed and combined with the multicriteria decision‐making method and the entropy‐weighted gray relation analysis method to determine the Pareto optimal solution and the optimal design scheme for the mixed material B‐pillar.

A Pillar Structure Optimization Design of Driving Safety

Optimization Design of Body Structure in Offset Crash

Crashworthiness Optimisation of A-pillar in Passenger Car in Rear-End Collision with Truck

Lightweight Design of Patch Plate on Car-body B-pillar based on Side Impact Safety

Multi-objective optimization design of B-pillar and rocker sub-systems of battery electric vehicle

Research on the lightweight design and multilevel optimization method of B‐pillar of hybrid material based on side‐impact safety and multicriteria decision‐making

Multi-objective optimization of vehicle body B-pillar lower joints based on crashworthiness analysis

Optimal design of automotive body B-pillar using simplified finite element model of body-in-prime combined with an optimization procedure

Ultra High Strength Steel B Pillar Reinforcement Structure to Enhance Side Impact and Roof Crash as Reducing Weight

Design optimization of hybrid material B-pillar under crush loading

Conceptual Design of B-Pillar Load Path for Reducing Vehicle Side Impact Intrusion

An optimisation approach to choose thickness of three members to improve IIHS small-overlap structural rating

Multidisciplinary design optimization of a generic b-pillar under package and design constraints

Optimization of excessive pedal intrusion in 40% offset crash on a specific vehicle

Vehicle safety optimization design under double standards

Body Structure Optimization of a Car in the Frontal Crash

Crashworthiness Design Optimization for an Evtol Aircraft.

Innovative Electric Vehicle Body Design Based on Insurance Institute for Highway Safety Side Impact Conditions

Improved Design of the Main Energy-Absorbing Automotive Parts Based on Traffic Accident Analysis

Simulation of Automobile Offset Frontal Impact and Structure Improvement

Improving Design for Crashworthiness of a Minibus