Fabrication of a high-strength lithium disilicate glass-ceramic in a complex glass system

Saifang Huang,Peng Cao,Chenfei Wang,Zhaohui Huang,Wei Gao
DOI: https://doi.org/10.1016/j.jascer.2013.02.007
2013-01-01
Journal of Asian Ceramic Societies
Abstract:The aim of this work was to develop a high-strength lithium disilicate glass-ceramic for dental restorative applications. A complex lithium disilicate glass composition was designed in the SiO2–Li2O–CaO–P2O5–ZrO2 glass system. Three sets of samples were employed to investigate the effects of heating profile, crystallization annealing temperature and holding time on the phase evolution, microstructure and mechanical properties. The results show that no lithium metasilicate was detected during the crystallization process. Semi-quantitative analysis reveals that the lithium disilicate glass-ceramics consist of 57–62wt% of rod-like lithium disilicate crystallites. A high flexural strength of 439±93MPa was observed in the glass-ceramic when it was subjected to two-stage annealing at 674°C. Additional higher temperature annealing stages were of little help for the improvement of bending strength, but did enhance the Vickers indentation fracture toughness (VIF) from 0.93 to 1.29MPa·m1/2. It is found that both the crystallization temperature and the holding time affect the phase transformation, morphology, and crystallite size of these glass-ceramics, but the crystallization temperature has a more profound effect than the holding time. The glass-ceramic developed in this study could be a good candidate for dental restorative applications, especially for posterior three-unit bridges.
What problem does this paper attempt to address?