Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

10.4% Power Conversion Efficiency of Ito-Free Organic Photovoltaics Through Enhanced Light Trapping Configuration

Single‐Junction Organic Photovoltaic Cell with 19% Efficiency

Flexible ITO‐Free Organic Photovoltaics on Ultra‐Thin Flexible Glass Substrates with High Efficiency and Improved Stability

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

High‐Efficiency ITO‐Free Organic Photovoltaics with Superior Flexibility and Upscalability

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Boosting Organic Photovoltaic Performance over 11% Efficiency with Photoconductive Fullerene Interfacial Modifier

A micro-cavity forming electrode with high thermal stability for semi-transparent colorful organic photovoltaics exceeding 13% power conversion efficiency

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Enhancing the Efficiency of Flexible, Large‐Area, ITO‐Free Organic Photovoltaic Devices

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

High Efficiency Semi-Transparent Organic Photovoltaics

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method

Constructing High‐Performance Organic Photovoltaics Via Emerging Non‐Fullerene Acceptors and Tandem‐Junction Structure

Ambient Condition, Three‐Layer Slot‐Die Coated Organic Photovoltaics with PCE of 10%

Organic Photovoltaics Incorporating Electron Conducting Exciton Blocking Layers

Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

Over 31% Efficient Indoor Organic Photovoltaics Enabled by Simultaneously Reduced Trap-assisted Recombination and Non-radiative Recombination Voltage Loss

Highly efficient ITO-free organic solar cells with a column-patterned microcavity