Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

Development of A Corrosion-Resistant Amorphous Silicon Carbide Photoelectrode for Solar-To-Hydrogen Photovoltaic/Photoelectrochemical Devices

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Demonstration of Irradiation-Resistant 4H-Sic Based Photoelectrochemical Water Splitting

A Thin-Film Silicon Based Photocathode with A Hydrogen Doped Tio2 Protection Layer for Solar Hydrogen Evolution

Inverted Pyramid Textured P-Silicon Covered with Co2P As an Efficient and Stable Solar Hydrogen Evolution Photocathode

Security Properties in Virtual Organizations

(Invited) Si/NiCoSex Nanorods Photocathode for Enhanced Photoelectrochemical Hydrogen Production

A synergetic strategy to construct anti-reflective and anti-corrosive Co-P/WSx/Si photocathode for durable hydrogen evolution in alkaline condition

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Surface/Interface Engineering of Si-Based Photocathodes for Efficient Hydrogen Evolution

Single-Crystal Integrated Photoanodes Based on 4 H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity

Improving Silicon Photocathode Performance for Water Reduction through Dual Interface Engineering and Integrating ReS 2 Photocatalyst

Progress in Promising Semiconductor Materials for Efficient Photoelectrocatalytic Hydrogen Production

Ultrathin MoS2-coated Ag@Si Nanosphere Arrays As an Efficient and Stable Photocathode for Solar-Driven Hydrogen Production.

High Performance N + P-Si/ti/nis X O Y Photocathode for Photoelectrochemical Hydrogen Evolution in Alkaline Solution

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

Nickel-coated Silicon Photocathode for Water Splitting in Alkaline Electrolytes

Metal–insulator–semiconductor photoelectrodes for enhanced photoelectrochemical water splitting

Conductive Layer Protected and Oxide Catalyst-Coated Thin-Film Silicon Solar Cell As an Efficient Photoanode

Achieving 12.0% Solar-to-Hydrogen Efficiency with a Trimetallic-Layer-Protected and Catalyzed Silicon Photoanode Coupled with an Inexpensive Silicon Solar Cell