Abstract:Magnesium (Mg) is a promising biodegradable implant material because of its appropriate mechanical properties and safe degradation products. However, in vivo corrosion speed and hydrogen gas production need to be controlled for uses in biomedical applications. Here we report the development of a conducting polymer 3,4-ethylenedioxythiphene (PEDOT) and graphene oxide (GO) composite coating as a corrosion control layer. PEDOT/GO was electropolymerized on Mg samples in ethanol media. The coated Mg samples were subjected to various corrosion tests. The PEDOT/GO coating significantly reduced the rate of corrosion as evidenced by lower Mg ion concentration and pH of the corrosion media. In addition, the coating decreased the evolved hydrogen. Electrochemical analysis of the corroding samples showed more positive corrosion potential, a decreased corrosion current, and an increase in the polarization resistance. PEDOT/GO corrosion protection is attributed to three factors; an initial passive layer preventing solution ingress, buildup of negative charges in the film, and formation of corrosion protective Mg phosphate layer through redox coupling with Mg corrosion. To explore the biocompatibility of the coated implants in vitro, corrosion media from PEDOT/GO coated or uncoated Mg samples were exposed to cultured neurons where PEDOT/GO coated samples showed decreased toxicity. These results suggest that PEDOT/GO coating will be an effective treatment for controlling corrosion of Mg based medical implants. Statement of significance: Coating Mg substrates with a PEDOT/GO composite coating showed a significant decrease in corrosion rate. While conducting polymer coatings have been used to prevent corrosion on various metals, there has been little work on the use of these coatings for Mg. Additionally, to our knowledge, there has not been a report of the combined used of conducting polymer and GO as a corrosion control layer. Corrosion control is attributed to an initial barrier layer followed by electrochemical coupling of the PEDOT/GO coating with the substrate to facilitate the formation of a protective phosphate layer. This coupling also resulted in a decrease in hydrogen produced during corrosion, which could further improve the host tissue integration of Mg implants. This work elaborates on the potential for electroactive polymers to serve as corrosion control methods.

Electrochemical Deposition of Mg(OH)2/GO Composite Films for Corrosion Protection of Magnesium Alloys

Microstructure and Corrosion Resistance of Electrophoretic Deposited Carbonated Hydroxyapatite-Graphene Oxide Composite Coatings on AZ91 Magnesium Alloy

One-step in situ synthesis of graphene oxide/MgAl-layered double hydroxide coating on a micro-arc oxidation coating for enhanced corrosion protection of magnesium alloys

Corrosion resistance and anti-soiling performance of micro-arc oxidation/graphene oxide/stearic acid superhydrophobic composite coating on magnesium alloys

Growth behavior and corrosion resistance of graphene oxide/MgAl Layered double hydroxide coating grown on micro-arc oxidation film of magnesium alloys

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Poly (3,4-ethylenedioxythiophene) graphene oxide composite coatings for controlling magnesium implant corrosion

Bio‐inspired graphene oxide/epoxy coating with ordered stacking for anticorrosion/wear protection of Mg alloy

Fabrication of Electroactive Poly(γ‐glutamic Acid) Coating for Improving Corrosion Resistance and Cytocompatibility of Magnesium Alloy

Graphene Oxide Film As a Protective Barrier for Mg Alloy: Worse or Better is Dependent on a Chemical Reduction Process

Graphene oxide as a corrosion-inhibitive coating on magnesium alloys

Construction of Superhydrophobic GO/Ca Coating on AZ31 Magnesium Alloy for Enhanced Anti-corrosion Performance

In Situ Synthesis of Graphene Oxide-Sealed LDHs Coatings: A Novel Approach to Enhancing Corrosion Resistance and Tribological Performance on Magnesium Alloys

A self-healing corrosion protection coating with graphene oxide carrying 8-hydroxyquinoline doped in layered double hydroxide on a micro-arc oxidation coating

Improved corrosion resistance of EP coating on Mg alloy through GO hybridization and silica-based superhydrophobic surface

Fabricating a corrosion-protective Li2CO3/Mg(OH)2 composite film on LA141 magnesium‐lithium alloy by hydrothermal method

Improving the corrosion resistance and osteogenic differentiation of ZK60 magnesium alloys by hydroxyapatite/graphene/graphene oxide composite coating

Corrosion Resistance Enhancement of Magnesium Alloy by N-doped Graphene Quantum Dots and Polymethyltrimethoxysilane Composite Coating

Preparation of corrosion-resistant hydrophobic composite films on magnesium alloy

Effect of Al2O3 Thin Film on Corrosion Resistance of Pure Mg and Its Anodic Coating

Simultaneously Improved Corrosion/wear Resistances of Mg Alloy Through an Ultra-Thin Mg(OH)2/graphene-APTES Coating