Abstract:In view of the insufficiency of bidirectional seismic control of long-span cable-stayed bridges as well as the limitations of existing schemes, a multi-direction damping system (MDDS) was proposed and investigated in this manuscript, which can provide seismic resistance bidirectionally. The new damping system owned a unique middle connecting structure, which overcomes the disadvantages that axial instability caused of excessive long rod and the demand of large installing space of traditional dampers. Both the performance stability and constitutive relationship of MDDS were verified by engineering tests, and the equivalent design method was then proposed and proved to be applicable. A detailed finite element numerical model of a super-long (main span over 800 m) column-type pylon cable-stayed bridge which equipped with MDDS in practice was established, the fragility curves of critical components were obtained by non-linear time history analysis, which exhibited the high efficiency of MDDS seismic performance in both transversal and longitudinal directions. Through extracting the median fragility value of 35 sections of the pylon under four damping cases, i.e. setting dampers transversely (TDS), longitudinally (LDS), bidirectionally (BDS), and MDDS, it can be concluded that MDDS performed far better on seismic resistance than LDS and TDS, and made the similar contribution with BDS. On account of half number of damper setting and the reduction in installing space demand, MDDS becomes the optimal choice in practical application for its economic efficiency and superiority. Furthermore, the optimal horizontal installing angle of MDDS was derived through six angle cases which was based on the system-level fragility curves comparison.

Passive Control System for Seismic Protection of A Multi-Tower Cable-Stayed Bridge

Multiobjective Optimal Control of Longitudinal Seismic Response of A Multitower Cable-Stayed Bridge

Passive Control System for Mitigation of Longitudinal Buffeting Responses of a Six-Tower Cable-Stayed Bridge

Seismic Response Control of Double-deck Long-span Cable-stayed Bridges

Passive Hybrid System for Seismic Failure Mode Improvement of a Long-Span Cable-Stayed Bridges in the Transverse Direction

An Innovative Isolation System for Lateral Seismic Control of a Cable- Stayed Bridge with Heavy Deck

Research on Seismic Response Control for Long Span Cable-Stayed Bridge

Seismic Response Mitigation of a Long-Span Tower Bridge with Two Types of Constraint System

System-based probabilistic evaluation of longitudinal seismic control for a cable-stayed bridge with three super-tall towers

Seismic control of long-span triple-tower suspension bridge under travelling wave action

Investigation on damage control with layer dissipation mechanism for cable-stayed bridges in longitudinal direction

A Case Study on the Seismic Performance of an Asymmetric Single-Tower Cable-stayed Bridge with A Hybrid Seismic Mitigation System

Semi-active control of a cable-stayed bridge under multiple-support excitations

Applications of Some Semiactive Control Systems to Benchmark Cable-Stayed Bridge

Probabilistic Seismic Evaluation and Experimental Tests of Multi-Direction Damping System on a Super-Long Column-Pylon Cable-Stayed Bridge

Compositive Optimal Control for the Seismic Response of a Long-Span Triple-Tower Suspension Bridge

Seismic Response Analysis and Shock Absorption Control of Self-anchored Cable-stayed Suspension Bridge

Experimental study on a cable-stayed bridge isolated with the combination of elastoplastic cables and fluid viscous dampers in the transverse direction

Numerical Simulation of a multi-span Extradosed Cable-stayed Bridge Employing Cable-Sliding Aseismic Friction Bearing for Seismic Protection

Shake Table Studies on Viscous Dampers in Seismic Control of a Single-Tower Cable-Stayed Bridge Model under Near-Field Ground Motions

Influences of Structural System on Seismic Performance of Multi-pylon Cable-stayed Bridge