Abstract:Niobium-based oxides are considered to be promising anode materials for lithium-ion batteries (LIBs) due to their high capacity, excellent cycling performance and desirable safety. However, the poor intrinsic conductivity and relatively sluggish reaction kinetics limit its broad applications. Herein, V 5+ was in situ doped into W 3 Nb 14 O 44 by solution combustion method. It was found that V 5+ doping did not destroy the intrinsic Wadsley-Roth crystal structure of W 3 Nb 14 O 44 . Instead, it led to a reduction in both cell volume and material size, which was convenient to the contact between the electrode material and the electrolyte, increased the number of reaction sites and shortened the Li + transport path. Meanwhile, the EIS and CV results demonstrate that the doping of V 5+ is beneficial to improve the electronic conductivity and Li + diffusion coefficient of the materials. Consequently, microsized W 3 V 0.28 Nb 13.72 O 44 exhibits superior electrochemical properties, including an outstanding rate capability of 144.17 mAh g-1 at 100 C and excellent cyclic stability with a capacity retention of 80.29% after 500 cycles at 5 C. In addition, the LiFePO 4 // W 3 V 0.28 Nb 13.72 O 44 full cell also exhibits good cycling stability over 800 cycles at 10 C with tiny capacity loss of only 0.02% per cycle. This work provides a general approach for the design and development of low-conductivity electrode materials for fast Li + storage.

W6+ & Br− Codoped Li4Ti5O12 Anode with Super Rate Performance for Li-ion Batteries

Doping the Li4Ti5O12 lattice with extra-large anions

Preparation and characterization of W-doped Li4Ti 5O12 anode material for enhancing the high rate performance

W6+-doped Nb2O5 as high-rate anode materials for lithium-ion batteries

Enhanced high-rate performance of Br-doping Li4Ti5O12 microspheres as anode materials for lithium-ion batteries

Nitridation Br-doped Li 4 Ti 5 O 12 anode for high rate lithium ion batteries

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Endowing LiTi2(PO4)3/C with excellent electrochemical performances through rational crystal doping

Structural and Electrochemical Characteristics of Li4−xAlxTi5O12 As Anode Material for Lithium-Ion Batteries

Enabling ultrafast ionic conductivity in Br-based lithium argyrodite electrolytes for solid-state batteries with different anodes

Ag/Br dual-doped Li6PS5Br electrolyte with superior conductivity for all-solid-state batteries

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Doping with W6+ ions enhances the performance of TiNb2O7 as an anode material for lithium-ion batteries

Enhanced Rate Performance of Li4Ti5O12 Anode for Advanced Lithium Batteries

A V-Doped W 3 Nb 14 O 44 Anode in Wadsley-Roth Structure for Ultra-Fast Lithium-Ion Half/Full Batteries

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Research Progress in Li4Ti5O12 As Anode Material for Li-ion Battery

Recent Developments in the Doped-Li4Ti5O12 Anode Materials of Lithium-Ion Batteries for Improving the Rate Capability

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Lithiation mechanism of W18O49 anode material for lithium-ion batteries: Experiment and first-principles calculations