Abstract:In this work, (Ag, In)-co-doped Cu2SnSe3-based compounds are prepared using a self-propagating high-temperature synthesis process. Ag2Se and as-synthesized (Ag, In)-co-doped Cu2SnSe3-based powders are mixed in a proportion according to the formula of Cu1.85Ag0.15Sn0.91In0.09Se3/x Ag2Se (x = 0, 3, 4, and 5%), which is followed by a subsequent plasma-activated sintering (PAS) to obtain consolidated composite bulks. A sandwich experiment is designed to reveal the evolution of the microstructure and phase composition of the composite samples during the PAS process. We investigate the reaction mechanism between Ag2Se and Cu2SnSe3-based matrix as well as the influence of Ag2Se on the phase composition, microstructure, and thermoelectric transport properties of the composites. Ag2Se addition is proven to be effective to improve Ag solubility in the Cu1.85Ag0.15Sn0.91In0.09Se3 matrix and introduce a CuSe secondary phase and an Ag-rich phase at grain boundaries. The electrical conductivity of Cu1.85Ag0.15Sn0.91In0.09Se3/x Ag2Se (x = 0, 3, 4, and 5%) composites decreases while the Seebeck coefficient increases with increasing Ag2Se addition, resulting in an optimized power factor. Moreover, benefiting from the collective phonon scattering at various defects induced by Ag2Se addition, the composite samples exhibit significantly suppressed lattice thermal conductivity, which reaches as low as 0.11 W m-1 K-1 at 700 K for the x = 5% sample. A peak figure-of-merit (ZT) of 1.26 at 750 K and an average ZT of 0.75 at 300-800 K are obtained for Cu1.85Ag0.15Sn0.91In0.09Se3/5% Ag2Se. This work provides an efficient way to improve average ZT values of Cu2SnSe3-based compounds for promising power generation at intermediate temperatures.

Chemical Synthesis of Nanostructured Cu2se with High Thermoelectric Performance

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Solution-Processed Cu2Se Nanocrystal Films with Bulk-Like Thermoelectric Performance.

Co-precipitation synthesis of nanostructured Cu3SbSe4 and its Sn-doped sample with high thermoelectric performance

One-step Rapid Synthesis of Cu2Se with Enhanced Thermoelectric Properties

High-performance thermoelectric Cu 2 Se nanoplates through nanostructure engineering

Remarkably high thermoelectric performance of Cu2-xLixSe bulks with nanopores

High thermoelectric performance and low thermal conductivity in Cu 2- x Na x Se bulk materials with micro-pores

Co-precipitation Synthesis of Sn And/or S Doped Nanostructured Cu3Sb1−xSnxSe4−ySy with a High Thermoelectric Performance

Compositing effects for high thermoelectric performance of Cu2Se-based materials

Enhanced Thermoelectric Properties of Cu2SnSe3-Based Materials with Ag2Se Addition

Colloidal Synthesis of Cu2−xAgxCdSnSe4 Nanocrystals: Microstructures Facilitate High Performance Thermoelectricity

Enhancing Thermoelectric Performance of (Cu1-Xagx)(2)se Via CuAgSe Secondary Phase and Porous Design

I-doped Cu2Se nanocrystals for high-performance thermoelectric applications

Colloidal Synthesis of Cu2CdSnSe4 Nanocrystals and Hot-Pressing to Enhance the Thermoelectric Figure-of-merit.

Ultrahigh thermoelectric performance in Cu2−ySe0.5S0.5 liquid-like materials

High thermoelectric performance of Cu3SbSe4 nanocrystals with Cu2-xSe in situ inclusions synthesized by a microwave-assisted solvothermal method

Precise Synthesis of Copper Selenide Nanowires with Tailored Cu Vacancies through Photo-Induced Reduction for Thermoelectric Applications

Large-Scale Colloidal Synthesis of Co-doped Cu 2 SnSe 3 Nanocrystals for Thermoelectric Applications

Low thermal conductivity and high thermoelectric performance in Cu2Se/CuAgSe composite materials

Facile Synthesis of Copper Selenides with Different Stoichiometric Compositions and Their Thermoelectric Performance at a Low Temperature Range