Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Energy Efficient Machining of Titanium Alloys by Controlling Cutting Temperature and Vibration

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Tough-brittle transition mechanism and specific cutting energy analysis during cryogenic machining of Ti–6Al–4V alloy

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Modelling and Optimization of Machining of Ti-6Al-4V Titanium Alloy Using Machine Learning and Design of Experiments Methods

Molecular dynamics simulation for temperature assisted machining of a polycrystalline γ-TiAl alloy

Predicting The High Speed Cutting Process Of Titanium Alloy By Finite Element Method

Investigation of Cutting Force in Longitudinal-Torsional Ultrasonic-Assisted Milling of Ti-6Al-4V

Advance in experimental research on cutting temperature of titanium alloys

Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions

Machining mechanism and stress model in cutting Ti6Al4V

Cutting tool wear minimization in drilling operations of titanium alloy Ti-6Al-4V

Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools

Temperature modeling analysis for milling of titanium alloy

Study of different cutting fluids effect on the coupling characteristics of milling noise-vibration and surface roughness of TA2 pure titanium

Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V

A Novel Finite Element Model for Thermally Induced Machining of Ti6Al4V

Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V

Microstructure alteration in the high-speed machining of titanium alloy involved with tool wear and cryogenic condition

Stability Research Considering Non-Linear Change in the Machining of Titanium Thin-Walled Parts