Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Investigation On Multi-Objective Optimal Design Of A Two Pass Condenser

Multi-Objective Constructal Optimization for Marine Condensers

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Multi-objective optimal design for the coolant system of a pressurized power reactor and its validation by the RELAP5/MOD3.2 code

Multi-objective optimal design of vertical natural circulation steam generator

Performance Optimization of a Condenser in Ocean Thermal Energy Conversion (OTEC) System Based on Constructal Theory and a Multi-Objective Genetic Algorithm

Multi-objective optimization of a steam generator

Investigations On Optimal Design Of A U-Tube Steam Generator

Multi-objective Thermo-Economic Optimization of Collins Cycle

NUMERICAL STUDY OF DIFFERENTIAL AND OPTIMAL DESIGN FOR MULTI2STREAM PLATE 2FIN HEAT EXCHANGER

Multi-Objective Optimization of the Microchannel Heat Sink Used for Combustor of the Gas Turbine

Multi-objective optimization of a hybrid microchannel heat sink combining manifold concept with secondary channels

Research on fluid flow and heat transfer characteristics in a three-dimensional condenser

Multi-objective Optimization of an Organic Rankine Cycle (ORC) for Low Grade Waste Heat Recovery Using Evolutionary Algorithm

Single/Multi-Objective Optimization Design and Numerical Studies for Lead-to-Supercritical Carbon Dioxide Heat Exchanger Based on Genetic Algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Multi-objective optimization design of internal cooling structure of a sensor probe

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

NUMERICAL STUDY OF DIFFERENTIAL AND OPTIMAL DESIGN FOR MULTI-STREAM PLATE-FIN HEAT EXCHANGER

Multi-objective Optimization Design and Strength Analysis of Printed Circuit Heat Exchangers for Supercritical CO2 Brayton Cycle

A Novel Optimization Framework for Designing Multi-Stream Compact Heat Exchangers and Associated Network