Abstract:Using pyromelliticdianhydride (PMDA) and polyfunctional epoxy ether (PFE) as branching agent, long chain branching stereocomplex poly(L‐lactide)s and poly(D‐lactide)s was prepared by reactive processing, respectably. Then stereocomplex poly(lactide)s of long chain branching PLLA and PDLA (sc‐PLA/BA) was prepared by solution blending and its fabricated the vascular stents via 3D‐printing.The effects of branching structure on melt crystallization behavior of sc‐PLA/BA investigated by DSC. The influence of the branching agent content on the crystallization ability of samples shows a bell‐shaped relationship, there is a maximum point when the branching agent content is1.5 wt%. When the branching agent content is less than 1.5 wt%, the crystallization ability of the sample increased with the increasing of branching agent content. When the branching agent content exceeded than 1.5 wt%, the crystallization ability of the samples decreased with branching agent content increasing. Such behavior is as the linear PLA branched to dendrite configuration, the enrichment of segments around branching structure within branched chains promoted its nucleation. But the high degree of branching caused inter‐ or intrachians entanglement which obstructed the segments movement and growth into the crystals. The half‐time of crystallization (t1/2) of the samples decreased from 6 minutes for initial sc‐PLA/BA‐0 to 3 minutes of sc‐PLA/BA‐1.5 wt% at 163°C. POM results indicated that nucleation density of sc‐PLA/BA significantly increased with the branching agent increasing. Moreover, mechanical testing demonstrated that forming branching structure could be an effective modification of the mechanical properties for sc‐PLA, its tensile strength and modulus increases from 57.3 MPa and 2.02 GPa to 70.4 MPa and 3.31 GPa, respectively. TGA results analyzed by FWO method and Kissinger method, indicated the apparent activation energy of sc‐PLA/BA samples increases from 96.8 to 113.3 kJ/mol, suggesting the improvement of heat resistance. The CCK‐8 assay, ALP assay and cell Live/Dead assay results indicated that sc‐PLA with branching structure presented very low cell cytotoxicity. Therefore, the long chain branching sc‐PLA matrix with branching agent could effectively improve its crystallization abilities, mechanical properties, heat resistance and biocompatibilities.

Biodegradable Polylactide Based Materials with Improved Crystallinity, Mechanical Properties and Rheological Behaviour by Introducing A Long-Chain Branched Copolymer

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Fully Biodegradable Long-Chain Branched Polylactic Acid with High Crystallization Performance and Heat Resistance

Robust biaxially stretchable polylactic acid films based on the highly oriented chain network and "nano-walls" containing zinc phenylphosphonate and calcium sulfate whisker: Superior mechanical, barrier, and optical properties

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness

Synthesis and investigation of sustainable long-chain branched poly(lactic acid-r-malic acid) copolymer as toughening agent for PLA blends

Enhancement of the properties of biodegradable poly(L-lactide)/poly(butylene carbonate) blends by introducing stereocomplex polylactide crystals

Poly(L-lactide)-b-poly(-caprolactone)-b-poly(D,L-lactide) Copolymers with Enhanced Toughness and Strength by Regulating Crystallization and Phase Separation

Construction of fully biodegradable poly(L-lactic acid)/poly(D-lactic acid)-poly(lactide-co-caprolactone) block polymer films: Viscoelasticity, processability and flexibility

Long chain branching polylactide: Structures and properties

Stereocomplex Poly(lactic Acid) Vascular Stents by 3d‐printing with Long Chain Branching Structures: Toward Desirable Crystallization Properties and Mechanical Performance

Enhanced Rheological Properties of PLLA with a Purpose-Designed PDLA-b-PEG-b-PDLA Triblock Copolymer and the Application in the Film Blowing Process to Acquire Biodegradable PLLA Films

Poly(L‐lactide)‐b‐poly(ε‐caprolactone)‐b‐poly(D,L‐lactide) copolymers with enhanced toughness and strength by regulating crystallization and phase separation

Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure Through Γ-Radiation-induced Chemical Reactions

High Melt Performance Poly (lactic acid) with Dual Hybrid Long Branching Chains Prepared by Chain Degradation and Restructuring

Synthesis and Characterization of Biodegradable Lactic Acid-Based Polymers by Chain Extension

Bionic structure and biocompatibilities of long chain branched poly(L-lactic acid) oriented microcellular foaming material

Biocompatibility Improvement and Controlled in Vitro Degradation of Poly (lactic Acid)-B-poly(lactide-co-caprolactone) by Formation of Highly Oriented Structure for Orthopedic Application.

Morphological, thermal, rheological and mechanical properties of poly (butylene carbonate) reinforced by stereocomplex polylactide

SYNTHESIS AND CHARACTERIZATION OF COPOLYMER LACTIDE AND ETHYLENE CARBONATE