Abstract:Spinel structure ZnMn2O4 anode materials were synthesized via an inexpensive microwave-assisted hydrothermally route from metal acetate raw material in an aqueous solution. The effects of reaction temperature and time, compactness, and pH on the synthesis conditions were systematically studied by designing four-factor and three-level orthogonal test method. The reaction temperature has the most significant influence on the experiment. X-ray diffraction structure study shows that all nine groups of ZnMn2O4 contain different contents of ZnO impurities. Rhombus-type ZnMn2O4 micro sheets were identified by scanning electron microscopy. Among them, the Li/ZnMn2O4 cells delivered an initial discharge capacity of 1057.3 mAh·g-1 and the capacity of 337.3 mAh·g-1 remains after 40 cycles for the as-synthesized sample under the optimized conditions of the reaction temperature at 200 ℃, the compactness of 60 vol%, the reaction time of 35 min and the pH value of 10. It is surprising to note that ZnMn2O4 prepared under this condition exhibits more stable and superior cyclic performance than other samples, which is due to its unique morphology. Finally, the reaction mechanism of ZnMn2O4 electrode material was studied by electrochemical test combined with the capacity differential curve. This research makes a step forward to the zinc manganese spinel oxide and shows that ZnMn2O4 is a promising anode material for lithium-ion batteries.

Rapid Synthesis of Rod-Like Pyrolucite MnO 2 by Microwave-Assisted Hydrothermal Method

Modifying High-Voltage Olivine-Type LiMnPO4 Cathode Via Mg Substitution in High-Orientation Crystal

Microwave Sintering and In-Situ Transmission Electron Microscopy Heating Study of Li1·2(Mn0·53Co0.27)O2 with Improved Electrochemical Performance

Microwave-Hydrothermal Synthesis of Mn 3 O 4 as Electrode Materials for Lithium-Ion Batteries and Supercapacitors

Hydrothermal Synthesis and Electrochemical Behavior of Nanosized Orthorhombic Limno2

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Rapid Synthesis of Hollow Structured MnO2 Microspheres and Their Capacitance

Facile microwave-assisted hydrothermal synthesis and improved electrochemical performance of micro rhombus ZnMn2O4 anodes for Li-ion batteries

A facile hydrothermal approach to synthesize nanosized single-crystal LiMn2O4 with high rate capability

Microwave Synthesis of LiMg 0.05 Mn 1.95 O 4 and Electrochemical Performance at Elevated Temperature for Lithium-Ion Batteries

An effective, facile, and rapid synthesis of nanosized Mn3O4 using a microwave route

Controllable preparation of nanosized LiMnPO4/C with rod‐like morphology by hydrothermal method with excellent electrochemical performance

Facile Synthesis of Α-Mno2 Nanorods and Their Electrochemical Performances

Structural and Electrochemical Study of Dandelion-Like Manganese Dioxide Synthesized by a New Microwave Hydrothermal Method

Rapid Hydrothermal and Post-Calcination Synthesis of Well-Shaped LiNi0.5Mn1.5O4 Cathode Materials for Lithium Ion Batteries

Structure and Performance of Dual-doped LiMn2O4 Cathode Materials Prepared Via Microwave Synthesis Method

Highly crystalline macroporous β-MnO2: Hydrothermal synthesis and application in lithium battery

Facile and large-scale synthesis of single-crystalline manganese oxyhydroxide/oxide nanostructures

Synthesis of Nano Cubic Microstructure LiNi0.8Co0.1Mn0.1O2 Cathode Materials Via Rapid Precipitation Assisted with Hydrothermal Treatment

Low-cost and eco-friendly synthesis of octahedral LiMn2O4 cathode material with excellent electrochemical performance

Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage