CONTINUOUS SIZE-BASED SEPARATION OF MICROPARTICLES IN STRAIGHT CHANNELS

jian zhou,ian papautsky
2010-01-01
Abstract:This work describes the use of a rectangular straight microchannel for separation of microparticles with a diameter difference of as little as 2 μm. Inertial microfluidics is exploited to achieve separation of particles. Inertial lift forces acting on particles in a straight channel causes them to equilibrate at a position near the channel sidewall. The inertial force is dependent on the particle size which facilitates in the formation of separate streams of particles. With a proper design for the outlet system, these particle streams can be collected to achieve a complete separation. This principle was demonstrated by fabricating straight channels in PDMS using soft lithography. The focusing region was 15 μm x 50 μm (W x H) with an opening angle of 28o connecting to the separation region. The separation region was a low aspect ratio segment with the dimension of 1200 μm x 50 μm which connected to a 5 outlet collection region. This device was used to demonstrate the separation of 2 μm and 4.16 μm diameter particles from a homogeneous mixture. Separation efficiency of 75~85% was achieved. This simple, planar device can be easily integrated with any lab-on-a-chip system for particle separation.
What problem does this paper attempt to address?