Abstract:Because minimally invasive surgery is increasingly used to target small lesions, demand is growing for miniaturized tools-such as microcatheters, articulated microforceps, or tweezers-that incorporate sensing and actuation for precision surgery. Although existing microfabrication techniques have addressed the construction of these devices, accurate integration and functionalization of chemical and physical sensors represent major challenges. This paper presents a microrobotic platform for the functionalization of fibers of diameters from 140 to 830 micrometers, with a patterning precision of 5 micrometers and an orientation error below 0.4°. To achieve this, we developed two 2 millimeter-by-3 millimeter, 200-micrometer-thick microrobots to align floating electronic circuits on a fiber during a wet transfer process. The position and orientation of the microrobots were controlled at the air/water interface by a permanent magnet. The stiffness of the position controlled was 0.2 newton millimeter, leading to an average force of 0.5 newton. The nonhomogeneous magnetic field of the magnet, associated with different preferred magnetization directions recorded in the microrobots, allowed the distance between the two microrobots to be precisely controlled. This extra degree of freedom was used to control the microrobot pair as a tweezer to grab and release floating electronic patterns, whereas the others were used to align the pattern position and orientation with the fiber. A model of this control, as well as the microrobots' interaction through surface tension, is proposed. Detailed performance validation is provided, and various exemplar sensor embodiments on a 200-micrometer-diameter fiber and three-dimensional devices are demonstrated.

Miniaturized stereo fiber devices based on the wrapon-a-rod technology

Recent Progress in Optical Micro/Nanofiber Technology

Theoretical study of microfiber resonator devices exploiting a phase shift

Microfiber Resonator in Polymer Matrix.

Optical microfibers and their applications

On-Chip Integration of Optical Nanofibers and Nanowires

Microfiber Resonators in the Linear and the Nonlinear Regimes

Brief Introduction to Optical Microfibers and Nanofibers

Splicing Optical Microfibers Via Polymer Nanowires

Mnf-Based Photonic Components And Devices

Miniaturized Broadband Highly Birefringent Device with Stereo Rod-Microfiber-air Structure

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Multifunctional Optical Nanofiber Polarization Devices With 3d Geometry

Miniature Function-Integrated Devices Based on Optical Microfibers

Platform for Enhanced Light-Graphene Interaction Length and Miniaturizing Fiber Stereo Devices

Parallel Fabrication of Silica Optical Microfibers and Nanofibers

A Microfiber Bragg Grating Based On A Microstructured Rod

Floating magnetic microrobots for fiber functionalization

D-Shaped Optical Fiber Microwire Devices

Recent progress of in-fiber WGM microsphere resonator

Submillimeter Multifunctional Ferromagnetic Fiber Robots for Navigation, Sensing, And Modulation