Selectively Filled Photonic Crystal Fibers with High-index Ionic Liquids

Jing Wang,Zhi Wang,Yange Liu,Tingting Han

DOI: https://doi.org/10.1364/acpc.2013.ath3c.6

2013-01-01

Abstract:The selectively filled photonic crystal fibers (PCFs) with high-index ionic liquids (ILs) are realized. Resonant coupling and thermal-tunning properties of these PCFs are theoretically and experimentally investigated.

What problem does this paper attempt to address?

Propagation Characteristics of Photonic Crystal Fibers Selectively Filled with Ionic Liquid

Xiaoqi Liu,Yange Liu,Zhi Wang

DOI: https://doi.org/10.1063/10.0002950

2021-01-01

Nanotechnology and Precision Engineering

Abstract:We present a numerical and experimental study of the propagation characteristics of photonic crystal fibers (PCFs) selectively filled with ionic liquid (IL; 1-butyl-3-methylimidazolium iodine). Three types of IL-filled PCF are investigated: one with all air holes filled, one with an IL-filled air hole in the second ring, and one with an IL-filled air hole in the third ring. The results show that the third type of IL-filled PCF is the most sensitive to temperature; the sensitivity of resonant dips between the LP01 and LP21 modes is ∼−2.9 nm/°C. Moreover, the intensity of the resonant dips changes with the polarization angle of the light source; the sensitivity is ∼−0.79 dB per unit polarization angle. Based on this property, IL-filled PCFs with different utilities can be realized by changing the filling position flexibly. Consequently, IL-filled PCFs can be used under flexible conditions and controllable temperatures to create a compact polarization-angle sensor.
Improved Bending Property of Half-Filled Photonic Crystal Fiber.

Yiping Wang,Xiaoling Tan,Wei Jin,Shujing Liu,Diqing Ying,Yeuk Lai Hoo

DOI: https://doi.org/10.1364/oe.18.012197

IF: 3.8

2010-01-01

Optics Express

Abstract:A half-filling technique was demonstrated to improve the bending properties of a fluid-filled photonic crystal fiber. Such a technique can realize to fill selectively a fluid into half of air holes in a PCF. The bending properties of the half-filled PCF are quite different from those of the fully-filled PCF. Distinct bending properties were observed when the half-filled PCF was bent toward different fiber orientations. Especially, the transmission spectrum of the half-filled PCF was hardly affected while the fiber was bent toward the filled-hole orientation.
Theoretical Research On The Strain Characteristics Of The Selective-Filling Birefringent Photonic Crystal Fiber

Jin Zuo,Tingting Han,Jingping Yang

DOI: https://doi.org/10.1007/978-981-13-6508-9_46

2020-01-01

Abstract:In this paper, the detailed strain characteristics of a selective-filling birefringent photonic crystal fiber (SF-PCF) were analyzed theoretically. The SF-PCF was achieved by selectively filling two symmetrical air holes around the fiber core of a PCF with a high index liquid. The group birefringence and phase birefringence presented unique characteristics different from the traditional index-guiding birefringence fiber. Hence, the transmission and sensing characteristics of the Sagnac interferometer based on the SF-PCF presented diversity and high sensitivity. Finally, the highest strain sensitivity of -9.56 pm/mu epsilon was theoretically achieved.
Control and design of fiber birefringence characteristics based on selective-filled hybrid photonic crystal fibers.

Tingting Han,Yan-Ge Liu,Zhi Wang,Junqi Guo,Zhifang Wu,Mingming Luo,Shuo Li,Jing Wang,Wei Wang

DOI: https://doi.org/10.1364/OE.22.015002

IF: 3.8

2014-01-01

Optics Express

Abstract:We demonstrated a kind of birefringence-controllable hybrid photonic crystal fibers (HPCFs) by selectively infiltrating air holes of PCFs with index-tunable liquids processing higher index than silica background. Detailed theoretical investigations on mode couplings from fundamental core mode to high-index-liquid-rod modes and birefringence properties of several HPCFs were presented. Strong wavelength dependence of phase and group birefringence was found, and HPCFs with different arrangements of high index liquid rods possess distinct birefringence characteristics. Then, the Sagnac interferometers (SIs) based on two typical HPCFs with different liquid-rod arrangements were theoretically and experimentally studied. The results indicated the SIs exhibit different transmission spectra and temperature responses due to the distinct birefringence features of HPCFs. A temperature sensitivity of -45.8 nm/degrees C at 56.5 degrees C was achieved using one HPCF, and a sensitivity of -11.6 nm/degrees C from 65 degrees C to 85 degrees C was achieved using the other HPCF. The thermal tunable HPCFs with birefringence-controllable properties will provide great potential for a variety of tunable optical devices and sensors. (C)2014 Optical Society of America
Elliptical-hole photonic crystal fiber with squeezed lattice

Yang Yue,Guiyun Kai,Zhi Wang,Jianguo Liu,Long Jin,Tingting Sun,Yunfei Lu,Chunshu Zhang,Yan Li,Yange Liu,Shuzhong Yuan,Xiaoyi Dong

2006-01-01

Abstract:A novel polarization-maintaining index-guiding photonic crystal fiber (PM-IG-PCF) was proposed. It is composed of a solid silica core and a cladding with squeezed-hexagonal-lattice elliptical air holes. Using a full-vector finite-element method (FEM), the modal birefringence of the fundamental mode in such a PCF was investigated. Numerical results show that a very high phase modal birefringence with magnitude of order of 10-3 has been obtained. By squeezing the air hole lattice, the phase modal birefringence of elliptical-hole PCF can be further enhanced. The phase modal birefringence of such a PCF can reach 3.0 × 10-3 at 1550 nm and even higher at longer wavelength.
Liquid-filled Simplified Hollow-Core Photonic Crystal Fiber

Shengnan Liu,Wei Gao,Hongwei Li,Yongkang Dong,Hongying Zhang

DOI: https://doi.org/10.1016/j.optlastec.2014.05.018

IF: 4.939

2014-01-01

Optics & Laser Technology

Abstract:We report on a novel type of liquid-filled simplified hollow-core photonic crystal fibers (HC-PCFs), and investigate their transmission properties with various filling liquids, including water, ethanol and FC-40. The loss and dispersion characterizations are calculated for different fiber parameters including strut thickness and core diameter. The results show that there are still low-loss windows existing for liquid-filled simplified HC-PCFs, and the low-loss windows and dispersions can be easily tailored by filling different liquids. Such liquid-filled simplified HC-PCFs open up many possibilities for nonlinear fiber optics, optical, biochemical and medical sensing.
Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Liang Wang,Dongxiao Yang,Yin Chen,Zhineng Li

DOI: https://doi.org/10.1109/icimw.2006.368774

2006-01-01

Abstract:A new type of highly birefringent polyethylene rectangular lattice photonic crystal fiber (RLPCF) was investigated. This PCF can operate at single-polarization single-mode (SPSM). By changing the structure parameters of the RLPCF, the mode index of the two linearly polarized principal states can be designed. Results show that the PCF has higher birefringence than regular RLPCF. Furthermore, the polyethylene material that is transparent to terahertz wave is inexpensive and easy to operate. This PCF is an effective component for some THz systems.
Highly birefringent elliptical-hole photonic crystal fiber with squeezed hexagonal lattice.

Yang Yue,Guiyun Kai,Zhi Wang,Tingting Sun,Long Jin,Yunfei Lu,Chunshu Zhang,Jianguo Liu,Yan Li,Yange Liu,Shuzhong Yuan,Xiaoyi Dong

DOI: https://doi.org/10.1364/OL.32.000469

IF: 3.6

2007-01-01

Optics Letters

Abstract:We propose a novel polarization-maintaining index-guiding photonic crystal fiber (PCF). It is composed of a solid silica core and a cladding with squeezed-hexagonal-lattice elliptical air holes. Using a full-vector finite-element method, we study the modal birefringence of the fundamental modes in such PCFs. Numerical result shows that very high modal birefringence with a magnitude of the order of 10(-2) around 1550 nm has been obtained. Furthermore, large normal dispersion appears over a wide range of wavelengths in both orthogonal polarizations. (c) 2007 Optical Society of America.
Photonic Crystal Fibers with Squeezed Hexagonal Lattice.

L Zhang,CX Yang

DOI: https://doi.org/10.1364/opex.12.002371

IF: 3.8

2004-01-01

Optics Express

Abstract:We study the birefringence and polarization coupling in the index-guiding photonic crystal fibers (PCFs) with squeezed hexagonal crystal lattice. The sign of form birefringence in such photonic crystal fibers can be changed as the wavelength changes, which is reported for the first time to our knowledge. A PCF-based polarization splitter with squeezed hexagonal lattice is proposed to achieve excellent extinction ratio and a simpler structure than those reported previously.
An All-Optical Controlled Attenuation Effect in an All-Fiber System Based on Ionic Liquid-Filled Photonic Bandgap Fiber

Junqi Guo,Min Zhou,Yan-Ge Liu,Ke Li,Wei Cui,Yu Liu,Renpu Li

DOI: https://doi.org/10.1088/1402-4896/ab2079

2019-01-01

Physica Scripta

Abstract:An all-optical controlled attenuation effect in an all-fiber system based on ionic liquid-filled photonic bandgap fiber (ILF-PBGF) is observed and demonstrated. The ILF-PBGF is formed by infusing a temperature-sensitive high-index ionic liquid into the cladding holes of the microstructured optical fiber. With the interactions between the controlling light and the high-index liquid columns, the bandgap drift of ILF-PBGF was observed, and an extinction ratio of about 8 dB was obtained at 1540 nm. Experimental investigations reveal that the attenuation is arose from the refractive index changes induced by thermal effect of the functional material.
Compact Tunable Multibandpass Filters Based on Liquid-Filled Photonic Crystal Fibers.

Yingjie Liu,Yiping Wang,Bing Sun,Changrui Liao,Jun Song,Kaiming Yang,Guanjun Wang,Qiao Wang,Guolu Yin,Jiangtao Zhou

DOI: https://doi.org/10.1364/ol.39.002148

IF: 3.6

2014-01-01

Optics Letters

Abstract:We demonstrated a compact tunable multibandpass filter with a short size of about 9 mm and a high wavelength-tuning sensitivity of up to -2.194 nm/°C by means of filling a liquid with a high refractive index of 1.700 into the air holes of a photonic crystal fiber (PCF). Such a PCF-based filter maintains an almost constant bandwidth and a large extinction ratio of more than 40 dB within the whole wavelength tuning range of more than 100 nm. Moreover, the transmission spectrum of the PCF-based filter is insensitive to the stretch force and the curvature of the fiber.
Simultaneous Measurement of Temperature and Force with High Sensitivities Based on Filling Different Index Liquids into Photonic Crystal Fiber.

Hu Liang,Weigang Zhang,Pengcheng Geng,Yange Liu,Zhi Wang,Junqi Guo,Shecheng Gao,Suyuan Yan

DOI: https://doi.org/10.1364/ol.38.001071

IF: 3.6

2013-01-01

Optics Letters

Abstract:A double-filled photonic crystal fiber (PCF) was fabricated by filling liquids of different indexes into two air holes in the cladding. The core mode coupled to the local cladding modes LP(01) and LP(11) in the 1310 and 1550 nm wavebands, respectively. Due to the unique characteristics of the mode coupling, the resonant peaks in different resonance areas shifted to the opposite directions with the variations of the temperature or the force. The double-filled PCFs achieved in this work showed useful applications in the simultaneous measurement of both the temperature and the force.
Photonic Crystal Fibers Confining Light by Both Index-Guiding and Bandgap-Guiding: Hybrid PCFs.

Limin Xiao,Wei Jin,M. S. Demokan

DOI: https://doi.org/10.1364/oe.15.015637

IF: 3.8

2007-01-01

Optics Express

Abstract:We propose two kinds of hybrid photonic crystal fiber (PCF) structures and investigate the properties of such PCFs in detail. The modal effective index, mode field area, confinement loss, group velocity dispersion, and birefringence are numerically simulated and compared with those of the corresponding index-guiding and bandgap PCFs, which allows for a deeper understanding of the guiding mechanism of the hybrid PCFs. The advantages of hybrid PCFs and potential applications are also discussed.
Effect of Filling High Index Materail on Polarization Mode Dispersion in Photonic Crystal Fibers

Chunshu Zhang,Guiyun Kai,Zhi Wang,Tingting Sun,Yange Liu,Jianfei Liu,Shuzhong Yuan,Xiaoyi Dong

DOI: https://doi.org/10.1117/12.693425

2006-01-01

Abstract:Novel highly birefringent photonic bandgap fibers (PBGFs) are obtained by filling high index material ill the air holes of total internal reflection birefringent photonic crystal fibers. The effect of filling high-index material on the transmission characteristics has been theoretically investigated. The photonic bandgap has been achieved by using the plane-wave method. Moreover, the polarization mode dispersion (PMD) has been studied by a full-vector finite-element method. Numerical results show that very high PMD with magnitude of order of 10(-10) has been respectively acquired, which is much higher than those of the non-filled fibers. Furthermore, strong coupling between surface modes and the fundamental modes has been found in the bandgap of the birefringent PBGFs.
Hybrid photonic-crystal fiber

Christos Markos,John C. Travers,Amir Abdolvand,Benjamin J. Eggleton,Ole Bang

DOI: https://doi.org/10.1103/RevModPhys.89.045003

2019-03-11

Abstract:This article offers an extensive survey of results obtained using hybrid photonic crystal fibers (PCFs) which constitute one of the most active research fields in contemporary fiber optics. The ability to integrate novel and functional materials in solid- and hollow-core PCFs through various post-processing methods has enabled new directions towards understanding fundamental linear and nonlinear phenomena as well as novel application aspects, within the fields of optoelectronics, material and laser science, remote sensing and spectroscopy. Here the recent progress in the field of hybrid PCFs is reviewed from scientific and technological perspectives, focusing on how different fluids, solids and gases can significantly extend the functionality of PCFs. In the first part of this review we discuss the most important efforts by research groups around the globe to develop tunable linear and nonlinear fiber-optic devices using PCFs infiltrated with various liquids, glasses, semiconductors and metals. The second part is concentrated on the most recent and state-of-the-art advances in the field of gas-filled hollow-core PCFs. Extreme ultrafast gas-based nonlinear optics towards light generation in the extreme wavelength regions of vacuum ultraviolet (VUV), pulse propagation and compression dynamics in both atomic and molecular gases, and novel soliton - plasma interactions are reviewed. A discussion of future prospects and directions is also included.

Optics,Applied Physics
Introduction of Birefringence into Photonic Crystal Fibers

Jian Ju,Wei Jin,Yuanhong Yang

DOI: https://doi.org/10.1117/12.885098

2011-01-01

Abstract:Selective opening and closing of air-holes in photonic crystal fibers (PCFs) are realized by using a femtosecond infrared laser and a CO2 laser. By heating/tapering the PCFs while pressurizing those opened holes, the birefringent properties of the PCFs can be modified. High birefringence of 3.6×10-4 and 1.5×10-3 were obtained by post-processing commercial LMA-10 and HC-1550-02 fibers.
Transmission Characteristics of Photonic Crystal Fibers Based on Filling Different Kinds of Liquid Crystals

Wang Jia-Lu,Du Mu-Qing,Zhang Ling-Li,Liu Yong-Jun,Sun Wei-Min

DOI: https://doi.org/10.7498/aps.64.120702

2015-01-01

Abstract:The transmission characteristics of full-filled photonic liquid crystal fibers (PLCFs) which are filled with five kinds of liquid crystals (LCs) are experimentally studied and theoretically analyzed. The influences of temperature and external electric field on the transmission characteristics of PLCFs are also discussed in this paper. The transmission spectra of PLCFs show obvious bandgaps, and the number and the central wavelengths of the bandgaps depend on the average value of the refractive indices of LCs. By changing the temperature from 20 ℃ to 80 ℃, a blue shift in the bandgap is observed, and the maximum tuning range of the bandgap is 41 nm. Then, with the voltage turning from 0 V to 250 V, the output power of the transmission spectrum decreases, while the central wavelength of the bandgap is almost unchanged. Finally, the transmission spectrum keeps a good stability, even if the polarization state of the input light changes.
Hybrid Photonic Crystal Fiber Coupler Infiltrated with Liquid Crystals

Juan,Ping Shum,Chao Lu,Xiwen Sun,Guoben Ren,Xia Yu,Guanghui Wang

DOI: https://doi.org/10.1109/leoswt.2009.4771657

2009-01-01

Abstract:We theoretically investigate the thermally tunable photonic crystal fiber (PCF) coupler infiltrated with nematic liquid crystals. The thermo-optical responsive NLC offers thermal tunability of the fiber coupler. The proposed design can find promising sensor applications.
The Leaky Spectrum of Bandgap Photonic Crystal Fibers

Liu Jianguo,Kai Guiyun,Xue Lifang,Zhang Chunshu,Li Yan,Sun Tingting,Liu Yange,Dong Xiaoyi

IF: 0.6

2006-01-01

ACTA PHOTONICA SINICA

Abstract:The leaky spectrum of Photonic crystal fibers(PCF) was simulated with beam propagation method.The results showed that the leaky spectrum usually had several bandgaps,which would provide theoretical reference for designing a novel multi-band filter.Furthermore,the leaky spectrum was very sensitive to the PCF structure,the spectrum was affected not only by the period of the air hole but also by its dimension.Finally,the liquid crystal(LC) could be infiltrated in the air holes of the PCF,because the refractive index of LC could be tuned by controlling the voltage and the temperature.The peak leaky wavelength and bandgap wavelength would red shift with the LC refractive index increasing,which would provide reference for designing a novel tunable filter and optical switch by controlling the voltage or tune the LC temperature.
Design and Analysis of Thermally Tunable Liquid Crystal Filled Hybrid Photonic Crystal Fiber Coupler

Juan,Ping Shum,Chao Lu,Xiwen Sun,Guobin Ren,Xia Yu,Guanghui Wang

DOI: https://doi.org/10.1016/j.optcom.2009.03.023

IF: 2.4

2009-01-01

Optics Communications

Abstract:We propose a novel tunable photonic crystal fiber (PCF) coupler scheme, that the light is coupled between a total internal reflection (TIR) guiding core and a photonic bandgap (PBG) guiding core. By introducing the thermo-optic responsive nematic liquid crystals (NLC) into the air holes around the PBG core, the hybrid PCF based coupler exhibits enhanced thermal tunability. The thermo-optical characteristics of the proposed coupler are numerically studied using finite element method (FEM) and beam propagation method (BPM). The proposed design can find promising applications in filtering and sensing devices.

Selectively Filled Photonic Crystal Fibers with High-index Ionic Liquids

Propagation Characteristics of Photonic Crystal Fibers Selectively Filled with Ionic Liquid

Improved Bending Property of Half-Filled Photonic Crystal Fiber.

Theoretical Research On The Strain Characteristics Of The Selective-Filling Birefringent Photonic Crystal Fiber

Control and design of fiber birefringence characteristics based on selective-filled hybrid photonic crystal fibers.

Elliptical-hole photonic crystal fiber with squeezed lattice

Liquid-filled Simplified Hollow-Core Photonic Crystal Fiber

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Highly birefringent elliptical-hole photonic crystal fiber with squeezed hexagonal lattice.

Photonic Crystal Fibers with Squeezed Hexagonal Lattice.

An All-Optical Controlled Attenuation Effect in an All-Fiber System Based on Ionic Liquid-Filled Photonic Bandgap Fiber

Compact Tunable Multibandpass Filters Based on Liquid-Filled Photonic Crystal Fibers.

Simultaneous Measurement of Temperature and Force with High Sensitivities Based on Filling Different Index Liquids into Photonic Crystal Fiber.

Photonic Crystal Fibers Confining Light by Both Index-Guiding and Bandgap-Guiding: Hybrid PCFs.

Effect of Filling High Index Materail on Polarization Mode Dispersion in Photonic Crystal Fibers

Hybrid photonic-crystal fiber

Introduction of Birefringence into Photonic Crystal Fibers

Transmission Characteristics of Photonic Crystal Fibers Based on Filling Different Kinds of Liquid Crystals

Hybrid Photonic Crystal Fiber Coupler Infiltrated with Liquid Crystals

The Leaky Spectrum of Bandgap Photonic Crystal Fibers

Design and Analysis of Thermally Tunable Liquid Crystal Filled Hybrid Photonic Crystal Fiber Coupler