Abstract:The use of superhydrophobic surfaces in a broad range of applications is receiving a great deal of attention due to their numerous functionalities. However, fabricating these surfaces using low-cost raw materials through green and fluorine-free routes has been a bottleneck in their industrial deployment. This work presents a facile and environmentally friendly strategy to prepare mechanically robust superhydrophobic surfaces with engineered lotus leaf mimetic multiscale hierarchical structures via a hybrid route combining soft imprinting and spin-coating. Direct soft-imprinting lithography onto starch/polyhydroxyurethane/cellulose nanocrystal (SPC) films formed micro-scaled features resembling the pillar architecture of lotus leaf. Spin-coating was then used to assemble a thin layer of low-surface-energy poly(dimethylsiloxane) (PDMS) over these microstructures. Silica nanoparticles (SNPs) were grafted with vinyltriethoxysilane (VTES) to form functional silica nanoparticles (V-SNPs) and subsequently used for the fabrication of superhydrophobic coatings. A further modification of PDMS@SPC film with V-SNPs enabled the interlocking of V-SNPs microparticles within the cross-linked PDMS network. The simultaneous introduction of hierarchical microscale surface topography, the low surface tension of the PDMS layer, and the nanoscale roughness induced by V-SNPs contributed to the fabrication of a superhydrophobic interface with a water contact angle (WCA) of ∼150° and a sliding angle (SA) of <10°. The PDMS/V-SNP@SPC films showed an ∼52% reduction in water vapor transmission rate compared to that of uncoated films. These results indicated that the coating served as an excellent moisture barrier and imparted good hydrophobicity to the film substrate. The coated film surfaces were able to withstand extensive knife scratches, finger-rubbing, jet-water impact, a sandpaper-abrasion test for 20 cycles, and a tape-peeling test for ∼10 repetitions without losing superhydrophobicity, suggesting superior mechanical durability. Self-cleaning behavior was also demonstrated when the surfaces were cleared of artificial dust and various food liquids. The green and innovative approach presented in the current study can potentially serve as an attractive new tool for the development of robust superhydrophobic surfaces without adverse environmental consequences.

Flexible superhydrophobic paper with a large and stable floating capacity

Superhydrophobicity of polyvinylidene fluoride membrane fabricated by chemical vapor deposition from solution

Facile preparation of pliable superamphiphobic papers with high and durable liquid repellency for anti-corrosion and open surface microfluidics

Synergistic reinforced superhydrophobic paper with green, durability, and antifouling function

Design and Synthesis of a Robust and Multifunctional Superhydrophobic Coating with a Three-Dimensional Network Structure on a Paper-Based Material

Flexible biomimetic materials with excellent photothermal performance and superhydrophobicity

Facile preparation of economical, eco-friendly superhydrophobic surface on paper substrate with excellent mechanical durability

Fabrication and research of superhydrophobic paper for oil-water separation

Facile Strategy for the Fabrication of Superhydrophobic Coatings on the Surface of Paper

Robust and Eco-Friendly Superhydrophobic Starch Nanohybrid Materials with Engineered Lotus Leaf Mimetic Multiscale Hierarchical Structures

Large-Scale Fabrication of Graded Convex Structure for Superhydrophobic Coating Inspired by Nature

One-Step Methods to Fabricate Durable Superhydrophobic Coatings for Flexible Electronic Sensors

Superefficient and robust polymer coating for bionic manufacturing of superwetting surfaces with “rose petal effect” and “lotus leaf effect”

A superhydrophobic coating to create multi-functional materials with mechanical/chemical/physical robustness

Hybrid Topography of Lotus Leaf under Hydrostatic/Hydrodynamic Pressure

Construction of super hydrophobic paper by modified nano-SiO2 hybrid medium fluoro-epoxy polymer and its properties

Fabrication of durable and sustainable superhydrophobic‐superoleophilic paper for efficient oil/water separation

Multiple Liquid Manipulations on Patterned Surfaces with Tunable Adhesive Property

Flexible bioinspired PDMS-paper based surface with hybrid wettability for droplet collection and detection

Mass Fabrication Of Flexible Pieces With Hydrophobic Surface For Underwater Vehicle Coating

Superhydrophobic Surfaces Fabricated by Femtosecond Laser with Tunable Water Adhesion From Lotus Leaf to Rose Petal.