Abstract:Cold cathode is a compelling candidate for compact and high-frequency vacuum electronic devices (VEDs) due to its superior electron emission characteristics, and sheet electron beam is more suitable for planar high-frequency VEDs. To combine cold cathode with sheet electron beam to manufacture a high-performance electron gun is a promising strategy. This article presents the design and fabrication of a sheet beam electron gun based on carbon nanotube (CNT) cold cathode and carries out the experiments to validate its performance. The designed electron gun with a sheet-shaped CNT cathode and an asymmetric focusing electrode can effectively generate and transmit a sheet electron beam. A sheet-shaped CNT cathode was fabricated using thermal chemical vapor deposition (CVD) for CNT growth and laser etching technique for sheet CNT pattern. An asymmetric focusing electrode utilized in the electron gun can effectively eliminate edge emission effect and achieve uniform sheet electron beam focusing. In the experiments, the sheet electron beam with dimensions of 2.86 $\times$ 0.41 mm is uniform and maintains the desired shape generated by the CNT cold cathode. The electron gun can operate in the pulse mode at a maximum beam current of 1.92 mA, corresponding to a beam current density of 0.23 A/cm $^{\text{2}}$ . This work establishes a solid foundation for further research on sheet beam generation by using CNT cold cathodes and expands their applicability in microwave VEDs.

Design of Low Current Density Elliptical Sheet Beam Gun

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

High Emission Current Density Electron Gun for a 263 GHz Sheet Beam Traveling Wave Tube

Design of a Sheet-Beam Electron Gun for a Ka-band Microfabricated Traveling-Wave Tube

Design of planar distributed three beam electron gun with narrow beam separation for W band staggered double vane TWT

A Sheet Beam Electron Gun Based on Carbon Nanotube Cold Cathode

Design and Analysis of Electron Beam of 0.67 THz Traveling Wave Tube

Development of an electron gun based on CNT-cathode for traveling wave tube application

Structure design and optimization of a compact C-band photocathode RF GUN

Optimized Design of a Low Perveance and High Current Density Pierce Gun for Ka-Band TWT

Design of Dual-Anode Electron Gun for Ka-Band Space Traveling Wave Tube

An Ultrahigh Compression Ratio Sheet Beam Electron-Optical System for 0.66-THz Traveling-Wave Tubes

Design of a Pierce electron gun for travelling wave tube

Optimized Design for High-Current, Low-Emmittance Photocathode RF Gun

A narrow sheet beam electron gun designed by approximate Pierce method for the millimeter wave TWT

Design and Experiment of a Sheet Beam Gun for Extended Interaction Oscillator

Tailoring Beam Shape Using a Coplanar Quadrupole Focusing Structure in Carbon Nanotube Cold Cathode Electron Gun

0.2-Thz Dual Mode Sheet Beam Traveling Wave Tube

Confined Focused Sheet Beam Flow of a Thermionic Linear Electron Source

Design of a Photocathode DC-gun for Generating Train of Sheet-Shaped Electron Bunches

Multi-beam gun design for an S-band klystron