Abstract:A coherent microwave and millimeter wave generation from fast-wave gyro-devices are attractive due to their high power handing capability. They have many applications such as plasma generation and heating, high gradient particle accelerators, and material processing. In the fast-wave gyro-devices, since the beam-wave interaction takes place between a transverse electric field of a guided wave and an electron transverse momentum, producing a high quality gyrating electron beam with a low velocity spread is a critical issue in the design of high performance gyro-devices. Different types of electron guns producing the gyrating electron beam with a large transverse momentum have been studied in many countries. The double-anode and single-anode magnetron-injection-guns (MIG) are commonly used. Due to the mechanical complexity of the double-anode MIG , however, the single-anode MIG which does not include the modulating anode seems attractive for use in practical devices. This paper describes studying on a single-anode MIG which produce a high quality gyrating electron beam. The design is based on analytic trade-off equations. And computer simulation uses the electron trajectory code-EGUN. The electron gun is used for a W-band, TE01 gyro-TWT amplifier which required to producing a small orbit electron beam. The electron gun parameters for the gyro-amplifier are listed in Table 1. The initial electron gun design starts with analytic trade-off equations developed by Baird and Lawson. The trade-off equations derived from adiabatic assumption and conservation of canonical angular momentum provide a useful guideline for setting up basic design parameters such as a cathode angle tilted with respect to a gun axis, a beam emitting surface radius, and an anode-cathode gap for a given beam voltage and solenoid magnetic fields at the cathode and the beam-wave interaction region. Fig. 1 shows a cathode magnetic field (Bc) and a magnetic field compression ratio as a function of a beam emitting radius (rc).It is well to known that the conservation law remains valid in a space charge dominated electron gun and in a non-adiabatic condition as well. Then we use the electron trajectory code-EGUN to obtain the final optimal parameters. Fig.2, 3, 4 shows the effect of the beam current, the anode-cathode gap and the anode voltage on the ratio of the transverse velocity to the axial velocity spread α and the axial velocity spread Δvz/vz respectively. © 2006 IEEE.

Design of Dual-Anode Electron Gun for Ka-Band Space Traveling Wave Tube

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Design of a Sheet-Beam Electron Gun for a Ka-band Microfabricated Traveling-Wave Tube

Design of a Pierce electron gun for travelling wave tube

Optimized Design of a Low Perveance and High Current Density Pierce Gun for Ka-Band TWT

Design and Analysis of Electron Beam of 0.67 THz Traveling Wave Tube

Numerical Simulation of Large Orbit Gyrotron Electron Beam Double CUSP Gun

A Finite Element Analysis for Vacuum Amplifier Electron Gun of Fine Pencil Beam

Consideration of Optimized Design for Photocathode RF Gun

Design and Analysis of a Diode Magnetron Injection Gun for a G-Band Gyro-TWT

Design and Experimental Demonstration of a Circular Beam Electron Gun and a PPM System for D-Band TWTs

W-Band Single-Anode Mig For Gyro-Twt

An Ultrahigh-Vacuum S-band Photocathode Radio-Frequency Electron Gun

RF design and high power tests of a new tsinghua photocathode RF GUN

Multi-beam gun design for an S-band klystron

Structure design and optimization of a compact C-band photocathode RF GUN

Design of Electron Gun and Focusing System for W-Band Folded Waveguide TWT

0.2-Thz Dual Mode Sheet Beam Traveling Wave Tube

Generation and Stable Transmission of Miniature Electron Beams for 0.65-THz Traveling Wave Tubes

Development of an L-band Photocathode RF Gun at Tsinghua University

Development of 1.3 GHz Medium-β (β = 0.634) Disk-Loaded Deflecting Cavity for 150 Kev Electron Beam