Abstract:Due to the volume expansion effect during charge and discharge processes, the application of transition metal oxide anode materials in lithium-ion batteries is limited. Composite materials and carbon coating are often considered feasible improvement methods. In this study, three types of TiO2@Fe3O4@C microspheres with a core–double-shell structure, namely TFCS (TiO2@Fe3O4@C with 0.0119 g PVP), TFCM (TiO2@Fe3O4@C with 0.0238 g PVP), and TFCL (TiO2@Fe3O4@C with 0.0476 g PVP), were prepared using PVP (polyvinylpyrrolidone) as the carbon source through homogeneous precipitation and high-temperature carbonization methods. After 500 cycles at a current density of 2 C, the specific capacities of these three microspheres are all higher than that of TiO2@Fe2O3 with significantly improved cycling stability. Among them, TFCM exhibits the highest specific capacity of 328.3 mAh·g−1, which was attributed to the amorphous carbon layer effectively mitigating the capacity decay caused by the volume expansion of iron oxide during charge and discharge processes. Additionally, the carbon coating layer enhances the electrical conductivity of the TiO2@Fe3O4@C materials, thereby improving their rate performance. Within the range of 100 to 1600 mA·g−1, the capacity retention rates for TiO2@Fe2O3, TFCS, TFCM, and TFCL are 27.2%, 35.2%, 35.9%, and 36.9%, respectively. This study provides insights into the development of new lithium-ion battery anode materials based on Ti and Fe oxides with the abundance and environmental friendliness of iron, titanium, and carbon resources in TiO2@Fe3O4@C microsphere anode materials, making this strategy potentially applicable.

Hollow Titanium Dioxide Spheres As Anode Material for Lithium Ion Battery with Largely Improved Rate Stability and Cycle Performance by Suppressing the Formation of Solid Electrolyte Interface Layer

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Hierarchical Nanosheet-Constructed Yolk-Shell TiO₂ Porous Microspheres for Lithium Batteries with High Capacity, Superior Rate and Long Cycle Capability.

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Preparation and electrochemical properties of TiO2 hollow spheres as an anode material for lithium-ion batteries

Controllable Synthesis of Mesostructures from TiO2 Hollow to Porous Nanospheres with Superior Rate Performance for Lithium Ion Batteries.

Hollow TiO2–X Porous Microspheres Composed of Well-Crystalline Nanocrystals for High-Performance Lithium-Ion Batteries

Hollow Tinb2o7@C Spheres With Superior Rate Capability And Excellent Cycle Performance As Anode Material For Lithium-Ion Batteries

Improved electrochemical performance for lithium-ion battery through titanium dissolving synthesis of diphase Li4Ti5O12 -TiO2 nanocomposite with prominent specific surface area

Hollow Si nanospheres with amorphous TiO2 layer used as anode for high-performance Li-ion battery

Li‐ion Reaction to Improve the Rate Performance of Nanoporous Anatase TiO2 Anodes

Graphitic Carbon Conformal Coating of Mesoporous TiO2 Hollow Spheres for High-Performance Lithium Ion Battery Anodes

Long-life SnS/TiO2/C stemming from nano-TiO2 @C complex hull as Li-ion battery anode

Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

TiO 2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Core–Double-Shell TiO2@Fe3O4@C Microspheres with Enhanced Cycling Performance as Anode Materials for Lithium-Ion Batteries

Porous Tinb24o62 Microspheres As High-Performance Anode Materials for Lithium-Ion Batteries of Electric Vehicles

TiO2 Hollow Spheres Composed of Highly Crystalline Nanocrystals Exhibit Superior Lithium Storage Properties.

Lychee-like TiO2@Fe2O3 Core-Shell Nanostructures with Improved Lithium Storage Properties as Anode Materials for Lithium-Ion Batteries

High-rate and high conductivity mesoporous TiO2 nano hollow spheres: Synergetic effect of structure and oxygen vacancies

High-rate lithiation-induced reactivation of mesoporous hollow spheres for long-lived lithium-ion batteries