Abstract:Abstract The widespread threat posed by slope structure failures to human lives and property safety is widely acknowledged. Additionally, natural soil often displays spatial variability due to geological deposition and other factors. Therefore, predicting the seismic response of slopes subjected to ground motions and inversely analyzing the spatial distribution of soils remains an unresolved issue. In the present work, a shaking table experimental test is first designed and carried out, in which a soft‐soil slope dynamic system is established. To capture the seismic response of the soft‐soil slope, specifically the experimental characteristic of acceleration and soil pressure response in both spatial domain and time domain, a series of sensors were pre‐embedded in the slope. Subsequently, a model updating approach is proposed for slope seismic analysis that incorporates spatial variability of soil. In addition, to enhance computational efficiency, the dimensionality reduction of Karhunen–Loève expansion method is introduced to reduce inverse analysis parameters. On the basis of 34 samples collected from experimental data, it is shown that near‐fault pulse‐like ground motions deliver greater concentrated energy, causing more severe damage to slope structures, especially the topsoil layer. Furthermore, using data obtained from a shaking table test subjected to ground motion Recorded Sequence Number 158H1 from the Pacific Earthquake Engineering Research Center NGA‐West2 database as an example, it is also shown that the proposed approach demonstrates high accuracy in predicting the spatial distribution of the maximum shear modulus in soil slope dynamic systems. The present work not only addresses the challenges posed by mainshock–aftershock effects but also highlights the potential of model updating approaches to enhance the understanding of slope behavior under seismic loading conditions.

Dynamic Model for Landsliding Monitoring under Rigid Body Assumption

Physically-based Approach to Analyze Rainfall-Triggered Landslide Using Hydraulic Gradient As Slide Direction

Prediction and application for rain induced shallow landslides in natural catchments

Dynamic Modeling of Meiping Landslide Process

A Displacement-Based Method for Evaluating the Stability of a Pile-Stabilized Slope

Synthetic Study Method of Dynamic Deformation Process of Landslide

Physically Based Modeling and Animation of Landslides with MPM

Improved Kalman filter method considering multiple factors and its application in landslide prediction

Experimental model updating of slope considering spatially varying soil properties and dynamic loading

Modeling of rapid evaluation for seismic stability of soil slope by finite element limit analysis

Field investigation of force and displacement within a strata slope using a real-time remote monitoring system

A Physical and Numerical Based Model for Early Prediction of Landslides Using Wireless Sensor Network

Spring-block friction model for landslides: Application to Vaiont and Maoxian landslides

A Physically Based Model for the Sequential Evolution Analysis of Rainfall‐Induced Shallow Landslides in a Catchment

Three dimensional simulation of landslide motion and the determination of geotechnical parameters

Modeling rainfall-induced landslide using the concept of local factor of safety: Uncertainty propagation and sensitivity analysis

A thermo-poro-mechanical model for catastrophic landslides under unsaturated conditions

Tilt Deformation and Instability of the Slope for Predicting Rainfall-Induced Landslide

Probabilistic Calibration of a Coupled Hydro-Mechanical Slope Stability Model with Integration of Multiple Observations

Modelling rainfall-induced landslides from initiation of instability to post-failure

Modeling of soil–rock mixture landslides with the generalized interpolation material point method