Copper Nanowire Based Transparent Conductive Films with High Stability and Superior Stretchability

Yin Cheng,Shouling Wang,Ranran Wang,Jing Sun,Lian Gao

DOI: https://doi.org/10.1039/c4tc00375f

IF: 6.4

2014-01-01

Journal of Materials Chemistry C

Abstract:The unique partly-embedding structure makes the copper nanowire-based film a transparent conductive electrode, with mechanical robustness and great anti-oxidation stability.

What problem does this paper attempt to address?

Fabrication of Stabilized and Dispersive Copper Nanowires Ink

Meng Yuan,Jing Xu,Qiang Chen,Dongsheng Li,Deren Yang

DOI: https://doi.org/10.1007/s10854-018-9637-4

2018-01-01

Journal of Materials Science Materials in Electronics

Abstract:In this paper, an organic stabilized and dispersive Cu nanowires (NWs) ink was proposed. We investigated and determined the recipe of the expectant ink framework and proved its usage as flexible transparent conductive films. The influences of main solutes on stability and dispersity of the ink were discussed detailedly. The stability was evaluated by the sedimentation time of the ink and the dispersity was weighed by the morphology of the freely-dispersed Cu NWs ink on substrates. The electric properties of the following conductive films were obatained by Hall effect measurement system. A simple and efficient method has carried out for fabricating the transparent electrodes from the prepared Cu NWs ink. These electrodes possessed a good performance in both conductivity and transmittance, which verified the pragmaticality of suggested Cu NWs ink as well. Typically, the sheet resistances of the processed electrodes made by the plasma enhanced chemical vapor deposition technique were about 80 Ω·sq−1, and the light transmittances at 550 nm were over 80%. The figures of merit of them were over 10−3 Ω−1.
Electrodeposition Fabrication of Cu@Ni Core Shell Nanowire Network for Highly Stable Transparent Conductive Films

He Zhang,Shang Wang,Yanhong Tian,Yubin Liu,Jiayue Wen,Yilong Huang,Chunjin Hang,Zhen Zheng,Chenxi Wang

DOI: https://doi.org/10.1016/j.cej.2020.124495

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:Copper nanowire (CuNW) is one of the most promising candidates for next-generation transparent conductive film (TCF). However, practical applications of CuNW are still limited by several drawbacks, including loose wire to wire junctions, poor resistance against oxidation, chemical and thermal damage. To concurrently address these urgent issues, highly conductive and stable TCF is prepared based on Cu@Ni core-shell NW networks by electrodeposition. The coated Ni shell can weld stacked NWs tightly, which decreases the sheet resistance from 513 to 15.8 Ohm/sq (at a transmittance of 88%), as well as improves the mechanical stability (1.03-fold resistance increase after 2000 cyclic bending). The Cu@Ni NW TCF exhibits excellent antioxidation performance after storing in atmospheric environment for 168 h. The passivation Ni shell also improvs the chemical and thermal stability. The Cu@Ni NW network keeps intact after 450 s H2O2 corrosion and heating at 400 degrees C for 30 min. Moreover, a flexible transparent heater was fabricated based on these TCFs, which shows excellent uniform heating performance and high response speed.
Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Wenwen Wang,Zhonglin Yang,Yujia Gu,Zelei Wu,Guixin Wang,Guinan Chen,Minchu Huang,Chenhui Xu,Cui Ye,Wang Zhang,Jianwei Nai,Yongwu Peng,Jun Pan,Changhui Ye

DOI: https://doi.org/10.1088/1361-6528/abc1a0

IF: 3.5

2020-11-11

Nanotechnology

Abstract:Abstract Silver nanowires are susceptible to degradation under ultraviolet (UV) light illumination. Encapsulating silver nanowire transparent conductive films (AgNW TCFs) with UV shielding materials usually result in the increasing of the sheet resistance or the decrease of the visible light transparency. Herein, we combine a reducing species (FeSO 4 ) and a thin layer (overcoating) of UV shielding material to solve the stability and the optical performance issues simultaneously. The AgNW TCFs show excellent stability under continuous UV light illumination for 14 h, and their sheet resistance varies only 6%. The dramatic enhancement of the stability against UV light illumination for as-obtained TCFs will make them viable for real-world applications in touch panels and displays.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Highly conductive and stretching-insensitive transparent electrodes based on CuNWs

Shihui Yu,Huibo Zhang,Pan Yang,Le Zhao,Chao Wu,Lingxia Li

DOI: https://doi.org/10.1016/j.matlet.2022.132023

IF: 3

2022-06-01

Materials Letters

Abstract:Flexible transparent electrode is attracting a lot of attention for various applications due to their versatile ability. However, it is still challenging to apply transparent electrode in stretchable application, because the conductivity will be degraded even lost when the electrode is stretched. Here, a high-performance transparent electrode with stretching-insensitivity is reported. The electrode is obtained by embedding copper nanowires into wrinkled polydimethylsiloxane elastomers via using simple sol-gel transition. The resulting electrode exhibits low sheet resistance of 16 Ω/sq. at an acceptable transmittance of ∼74% at visible region, and tensile stability under below 210% strain. In particular, the resistance is almost unchanged after 2500 stretching cycles with a strain of 70%, indicating excellent stretching-insensitively.

materials science, multidisciplinary,physics, applied
Copper Nanowire/Polydopamine-Modified Sodium Alginate Composite Films with Enhanced Long-Term Stability and Adhesion for Flexible Organic Light-Emitting Diodes

Yu Zhao,Jiachen Kang,Wenzhe Huang,Peng Kong,Di An,Gufeng He

DOI: https://doi.org/10.1021/acsami.3c13443

IF: 9.5

2023-11-03

ACS Applied Materials & Interfaces

Abstract:Copper nanowire (CuNW), with combined advantages of high conductivity and cost-effectiveness, is considered a promising material for the development of next-generation transparent conductive films (TCFs) in the field of flexible optoelectronics. However, the practical application of CuNW TCFs is hindered by some limitations, such as conductivity degradation and poor adhesion. Here, we demonstrate a stable CuNW composite film by embedding CuNWs into a polydopamine (PDA)-modified sodium alginate...

materials science, multidisciplinary,nanoscience & nanotechnology
The Growth Mechanism of Copper Nanowires and Their Properties in Flexible, Transparent Conducting Films

Aaron R. Rathmell,Stephen M. Bergin,Yi‐Lei Hua,Zhi‐Yuan Li,Benjamin J. Wiley,Yi-Lei Hua,Zhi-Yuan Li

DOI: https://doi.org/10.1002/adma.201000775

IF: 29.4

2010-06-04

Advanced Materials

Abstract:Copper nanowires grow from spherical copper seeds in an aqueous solution. Conductive films of copper nanowires have a transmittance of 65% (∼15% more than the best values reported for carbon nanotubes), and remain conductive after 1000 bending cycles or one month in air.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Self-assembled Growth of SnO 2 Nanoshells on Copper Nanowires for Stable and Transparent Conductors

Le Zhao,Junjun Li,Zichen Song,Xiuyu Wang,Shihui Yu

DOI: https://doi.org/10.1021/acsanm.3c01608

IF: 6.14

2023-06-02

ACS Applied Nano Materials

Abstract:Despite a century of research, the inability to design flexible transparent electrodes with low cost and high stability has been the greatest obstacle in realizing flexible electronics. Herein, we report the growth of self-assembled SnO2 nanoshells on thin copper nanowire (Cu NW) networks using a simple and effective solution method. In addition, the SnO2–Cu NW flexible films exhibit an extremely low sheet resistance of ∼13.6 Ω/sq, with ∼83.5% optical transparency. In harsh environments (such as strong oxidation, heat, and humidity conditions), the films demonstrate excellent resistance stability, which can compete with the resistance stability of noble silver nanowire films. Particularly, the films are robust and able to withstand a high temperature of 210 °C without any deterioration of performance. Employing the outstanding stability of SnO2–Cu NWs, we also demonstrate the macroscopic use of a transparent conductor in a flexible transparent heater.

materials science, multidisciplinary,nanoscience & nanotechnology
Synthesis of Ultralong Copper Nanowires for High-Performance Transparent Electrodes

Dieqing Zhang,Ranran Wang,Meicheng Wen,Ding Weng,Xia Cui,Jing Sun,Hexing Li,Yunfeng Lu

DOI: https://doi.org/10.1021/ja3050184

IF: 15

2012-01-01

Journal of the American Chemical Society

Abstract:Cu nanowires hold great promise for the fabrication of low-cost transparent electrodes. However, their current synthesis is mainly performed in aqueous media with poor nanowire dispersibility. We report herein the novel synthesis of ultralong single-crystalline Cu nanowires with excellent dispersibility, providing an excellent candidate material for high-performance transparent electrode fabrication.
Electrospun metal nanofiber webs as high-performance transparent electrode.

Hui Wu,Liangbing Hu,Michael W Rowell,Desheng Kong,Judy J Cha,James R McDonough,Jia Zhu,Yuan Yang,Michael D McGehee,Yi Cui

DOI: https://doi.org/10.1021/nl102725k

IF: 10.8

2010-01-01

Nano Letters

Abstract:Transparent electrodes, indespensible in displays and solar cells, are currently dominated by indium tin oxide (ITO) Films although the high price of indium, brittleness of Films, and high vacuum deposition are limiting their applications Recently, solution-processed networks of nanostructures such as carbon nanotubes (CNTs), graphene, and silver nanowires have attracted great attention as replacements A low junction resistance between nanostructures is important for decreasing the sheet resistance However, the junction resistances between CNTs and boundry resistances between graphene nanostructures are too high The aspect ratios of silver nanowires are limited to similar to 100, and silver is relatively expensive Here, we show high-performance transparent electrodes with copper nanofiber networks by a low-cost and scalable electrospinning process Copper nanofibers have ultrahigh aspect ratios of up to 100000 and fused crossing points with ultralow junction resistances, which result in high transmitance at low sheet resistance, e g, 90% at 50 Omega/sq The copper nanofiber networks also show great flexibility and stretchabilty Organic solar cells using copper nanowire networks as transparent electrodes have a power efficiency of 3 0%, comparable to devices made with ITO electrodes
Copper nanowires in recent electronic applications: progress and perspectives

Xingsheng Li,Yumeng Wang,Chengri Yin,Zhenxing Yin

DOI: https://doi.org/10.1039/c9tc04744a

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:This article outlines the latest advances of copper nanowires in electronic applications, including flexible transparent electrodes for optical devices, current collectors for lithium-ion batteries, and stretchable electrodes for wearable devices.

materials science, multidisciplinary,physics, applied
Superstable Copper Nanowire Network Electrodes by Single-Crystal Graphene Covering and Their Applications in Flexible Nanogenerator and Light-Emitting Diode

Jianwei Wang,Zhihong Zhang,Shujie Wang,Ruifeng Zhang,Yi Guo,Gang Cheng,Yuzong Gu,Kaihui Liu,Ke Chen

DOI: https://doi.org/10.1016/j.nanoen.2020.104638

IF: 17.6

2020-01-01

Nano Energy

Abstract:Copper nanowires (CuNWs), with excellent electronic properties and high cost-effectiveness, have tremendous potential in the field of transparent conductive electrodes for flexible electronics, large touch screen display and triboelectric energy harvesters, while their vulnerability to oxidation in air has impeded possible practical applications. Fortunately, it has been recognized that graphene encapsulation of CuNWs is capable of protecting CuNWs. However, neither self-assembled reduced graphene oxide nor chemical vapor deposition-grown polycrystalline graphene coatings can guarantee full protection to CuNWs, due to their ubiquitous voids, grain boundaries and wrinkles that allow water and oxygen molecules to pass through and result in the accelerated electrochemical corrosion at the graphene-copper interface, especially under folding conditions. Herein, we demonstrate a sandwich-structured single-crystal graphene/copper nanowire network/UV-curable resin (SCG/CuNW/UVR) composite film with ultrahigh electronic performance stability. The SCG/CuNW/UVR electrode exhibits a good optical and electrical performance (~19 Ω sq−1 under 84.3% transmittance), excellent mechanical robust and remarkably high oxidation resistance (ΔR/R0 < 0.2 within 180 days), in sharp contrast with the bare CuNWs (ΔR/R0 > 1 after 1 day) and polycrystalline graphene-covered CuNWs counterparts (ΔR/R0 > 1 after 7 days). Furthermore, the SCG/CuNW/UVR electrodes can replace indium tin oxide (ITO) electrodes to construct the triboelectric nanogenerators (TENG) and quantum dot light emitting diodes (QLED), comparable to the flexible commercial ITO counterparts. The fabrication of such high-performance SCG/CuNW/UVR electrode is facile to be scaled-up with low cost, providing the feasibility for industrial applications of flexible ITO-free electronic and optoelectronic devices.
Stretchable Transparent Conductors Based on Copper Nanowires and Polyurethane

Su Ding,Jinting Jiu,Katsuaki Suganuma,Yanhong Tian,Hiroshi Uchida

DOI: https://doi.org/10.1109/nano.2015.7388968

2015-01-01

Abstract:Transparent conductors (TCs) based on metal nanowires have emerged as an outstanding alternative of indium tin oxide (ITO) film in particular for wearable sensors, solar cells and other flexible devices. Copper nanowire (CuNW) TCs featured by low-cost and high conductivity have attracted much attention in these days. The fabrication of CuNW TCs is usually complicated by sintering process involving high temperature and reducing atmosphere, and multi-step transfer methods. Here, a fast high intensity pulse light sintering technique was applied to achieve CuNW TCs with high conductivity of 2.54 ohm/sq on polyurethane (PU) substrates. Importantly, the CuNWs-PU TCs exhibited excellent stretchability with resistance increase of only 4.3 times after 20% strain for 100 cycles.
Passivation coating on electrospun copper nanofibers for stable transparent electrodes.

Po-Chun Hsu,Hui Wu,Thomas J Carney,Matthew T McDowell,Yuan Yang,Erik C Garnett,Michael Li,Liangbing Hu,Yi Cui

DOI: https://doi.org/10.1021/nn300844g

IF: 17.1

2012-01-01

ACS Nano

Abstract:Copper nanofiber networks, which possess the advantages of low cost, moderate flexibility, small sheet resistance, and high transmittance, are one of the most promising candidates to replace indium tin oxide films as the premier transparent electrode. However, the chemical activity of copper nanofibers causes a substantial increase in the sheet resistance after thermal oxidation or chemical corrosion of the nanofibers. In this work, we utilize atomic layer deposition to coat a passivation layer of aluminum-doped zinc oxide (AZO) and aluminum oxide onto electrospun copper nanofibers and remarkably enhance their durability. Our AZO-copper nanofibers show resistance increase of remarkably only 10% after thermal oxidation at 160 °C in dry air and 80 °C in humid air with 80% relative humidity, whereas bare copper nanofibers quickly become insulating. In addition, the coating and baking of the acidic PEDOT:PSS layer on our fibers increases the sheet resistance of bare copper nanofibers by 6 orders of magnitude, while the AZO-Cu nanofibers show an 18% increase.
Fast Fabrication Of Copper Nanowire Transparent Electrodes By A High Intensity Pulsed Light Sintering Technique In Air

Su Ding,Jinting Jiu,Yanhong Tian,Tohru Sugahara,Shijo Nagao,Katsuaki Suganuma

DOI: https://doi.org/10.1039/c5cp04582g

IF: 3.3

2015-01-01

Physical Chemistry Chemical Physics

Abstract:Copper nanowire transparent electrodes have received increasing interest due to the low price and nearly equal electrical conductivity compared with other TEs based on silver nanowires and indium tin oxide (ITO). However, a post- treatment at high temperature in an inert atmosphere or a vacuum environment was necessary to improve the conductivity of Cu NW TEs due to the easy oxidation of copper in air atmosphere, which greatly cancelled out the low price advantage of Cu NWs. Here, a high intensity pulsed light technique was introduced to sinter and simultaneously deoxygenate these Cu NWs into a highly conductive network at room temperature in air. The strong light absorption capacity of Cu NWs enabled the welding of the nanowires at contact spots, as well as the removal of the thin layer of residual organic compounds, oxides and hydroxide of copper even in air. The Cu NW TE with a sheet resistance of 22.9 Ohm sq(-1) and a transparency of 81.8% at 550 nm has been successfully fabricated within only 6 milliseconds exposure treatment, which is superior to other films treated at high temperature in a hydrogen atmosphere. The HIPL process was simple, convenient and fast to fabricate easily oxidized Cu NW TEs in large scale in an air atmosphere, which will largely extend the application of cheap Cu NW TEs.
Purification of Copper Nanowires to Prepare Flexible Transparent Conductive Films with High Performance

Chenxia Kang,Sanjun Yang,Min Tan,Chenhuinan Wei,Qiming Liu,Ju Fang,Gang Liu

DOI: https://doi.org/10.1021/acsanm.8b00326

IF: 6.14

2018-01-01

ACS Applied Nano Materials

Abstract:Copper nanowire (Cu NW) films have been widely studied due to their potential applications in optoelectronic devices, but there are rare reports of high-performance NW films without nanoparticles (NPs). In this paper, a water-hydrophobic organic solvent system was used to efficiently separate NPs from NWs. As a result, the transmittance of the purified Cu NW/PET films improved approximately 3% compared with the unpurified Cu NW/PET films at a given sheet resistance. And the high-quality Cu NW/PET films have a transmittance of 97.61% at 102.9 Ω sq–1. A detailed mechanism of purification is also proposed. This facile purification method is highly efficient and widely applicable to improve the performance of flexible transparent conductive films, which will meet the need of commercial applications of NW films with excellent optoelectronic performance.
Silver‐Nanowire Mesh‐Structured Transparent Conductive Film with Improved Transparent Conductive Properties and Mechanical Performance

Shaowei Hu,Jiahui Gu,Weiwei Zhao,Hongjun Ji,Xing Ma,Jun Wei,Mingyu Li

DOI: https://doi.org/10.1002/admt.201900194

IF: 6.8

2019-05-20

Advanced Materials Technologies

Abstract:<p>Silver nanowires (AgNWs) are an optimum material for fabricating flexible transparent conductive films (TCFs), which are the primary materials in flexible optoelectronic devices. In most studies, TCFs are produced by coating AgNW onto a substrate to form a random network. However, according to some reports, a mesh‐structured network may allow superior performance. The effects of a mesh structure are quantitatively studied, a simple calculation method to derive property curves of mesh‐structured networks from those of random networks is presented, and a rule to fabricate mesh‐structured TCFs with improved performance is determined. Different networks are then fabricated using a template method and transferred onto a polyethylene terephthalate substrate to produce flexible TCFs. Through a series of experiments, it is verified that the mesh structure makes a positive contribution to both the transparent conductive properties and the flexibility. The transmittance of the film is 95.2% when the sheet resistance is 36.0 Ω sq<sup>−1</sup>, and the properties of the film are well maintained after 5000 bending cycles at a bending curvature of 5 mm.</p>

materials science, multidisciplinary
Highly robust, transparent, and conductive films based on AgNW-C nanowires for flexible smart windows

Tingting Hao,Shen Wang,Hongbo Xu,Xiang Zhang,Junying Xue,Shikun Liu,Ying Song,Yao Li,Jiupeng Zhao

DOI: https://doi.org/10.1016/j.apsusc.2021.149846

IF: 6.7

2021-09-01

Applied Surface Science

Abstract:Flexible transparent conductive films (FTCFs) have attracted tremendous concern because it is a key component of next generation electronics and optoelectronic devices. Silver nanowires (AgNWs) random networks have become the most promising candidates for FTCFs, with high transmittance, low sheet resistance, and excellent mechanical flexibility. However, there are many barriers to the application of FTCFs based on AgNWs, such as easy oxidization and weak adhesion to the substrates. Here, we developed a facile approach to fabricate AgNW-C core–shell nanowires derived from the carbonization of glucose by a one-pot solvothermal method. A uniform amorphous carbon shell coating improves the chemical stability of AgNWs and the hydroxyls on the surface of the nanowires enhance the adhesion to the substrate. The AgNW-C/poly(ethylene terephthalate) (PET) transparent conductive film shows excellent robustness when subjected to bending (ΔR/R0 ≈ 2.8% after bending 2000 times). Besides, the conductivity of AgNW-C/PET film remains relatively stable after 100 peeling-off cycles by a 3 M tape test. A flexible electrochromic device (FCD) has also been constructed based on the AgNW-C/PET film, which shows promising stability and mechanical flexibility due to the remarkable electrochemical stability and mechanical strength of the AgNW-C/PET films. The results present the significant potential applications of the flexible transparent device based on AgNW-C/PET film for many fields in the future.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Zinc Oxide-Encapsulated Copper Nanowires for Stable Transparent Conductors

Bo Wang,Shihui Yu,Liang Huang

DOI: https://doi.org/10.3390/nano13192659

IF: 5.3

2023-09-28

Nanomaterials

Abstract:Cu nanowire (NW)-based transparent conductors are considered to be highly promising constituents of next-generation flexible transparent electronics. However, the fast oxidation of copper under ambient conditions hinders the use of Cu NWs. Herein, we demonstrate a low-cost and scalable approach for preparing a ZnO shell on the surface of Cu NWs under ambient conditions. The covered ZnO shells enhance the oxidative stability of Cu NWs. The optical and electrical properties of ZnO@Cu NWs remain similar to the original performance of the Cu NWs (for example, before encapsulating: 13.5 Ω/sq. at 84.3%, after encapsulating: 19.2 Ω/sq. at 86.7%), which indicates that encapsulation with a ZnO shell enables the preservation of the transparency and conductivity of Cu NW networks. More importantly, the ZnO@Cu NWs exhibit excellent stability in terms of long-term storage, hot/humid environments, and strong oxidizing atmosphere/solution.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
The Fabrication of Cu Nanowire/graphene/al Doped ZnO Transparent Conductive Film on PET Substrate with High Flexibility and Air Stability

Liqiang Zhang,Rui Yang,Kai Chen,Xin Wang,Yushu Tang,Fan Yang,Rui Liu,Zhizhen Ye,Yongfeng Li

DOI: https://doi.org/10.1016/j.matlet.2017.07.048

IF: 3

2017-01-01

Materials Letters

Abstract:The fabricating of transparent conductive films with low resistance, high transparency, flexibility and air stability is significant in the study of flexible electronics. In this work, Cu nanowire/Graphene/Al doped ZnO (Cu/Gra/AZO) composite transparent conductive films were fabricated on PET substrate at room temperature. It is found that this composite film has a high transmittance of 74% at 550 nm, a low sheet resistance of 9.40 X/sq and good air stability. In this sandwich structure electrode, Cu nanowires (NWs) play an important role for ensuring the low resistance of the composite film, and the addition of graphene further reduces the resistance plus protects Cu NWs from oxidation. Moreover, the top layer AZO can protect the graphene layer from external damage and improve its stability. (C) 2017 Elsevier B.V. All rights reserved.
Highly Transparent, Conductive, Flexible Resin Films Embedded with Silver Nanowires.

Yaqiu Jiang,Jun Xi,Zhaoxin Wu,Hua Dong,Zhixu Zhao,Bo Jiao,Xun Hou

DOI: https://doi.org/10.1021/acs.langmuir.5b00384

IF: 3.9

2015-01-01

Langmuir

Abstract:In this article, a low sheet resistance and highly transparent silver nanowire (AgNW) resin composite film was demonstrated, which was prepared by a simple and efficacious two-step spin-coating method. By burying the AgNWs below the surface of the transparent resin matrix which was cured at 150 °C in air, we achieved a uniform, highly transparent, conductive, flexible film. Compared to the reported transparent electrodes, this composite transparent and conductive film showed 10 Ω/□ sheet resistance and nearly 90% mean optical transmittance over the UV-visible range simultaneously. Undergoing hundreds of cycles of tensile and compression folding, the composite film slightly increased its sheet resistance by less than 5%, displaying good electromechanical flexibility. These characteristics of the composite AgNW-resin films were expected to be used in applications of flexible optoelectronics.

Copper Nanowire Based Transparent Conductive Films with High Stability and Superior Stretchability

Fabrication of Stabilized and Dispersive Copper Nanowires Ink

Electrodeposition Fabrication of Cu@Ni Core Shell Nanowire Network for Highly Stable Transparent Conductive Films

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Highly conductive and stretching-insensitive transparent electrodes based on CuNWs

Copper Nanowire/Polydopamine-Modified Sodium Alginate Composite Films with Enhanced Long-Term Stability and Adhesion for Flexible Organic Light-Emitting Diodes

The Growth Mechanism of Copper Nanowires and Their Properties in Flexible, Transparent Conducting Films

Self-assembled Growth of SnO 2 Nanoshells on Copper Nanowires for Stable and Transparent Conductors

Synthesis of Ultralong Copper Nanowires for High-Performance Transparent Electrodes

Electrospun metal nanofiber webs as high-performance transparent electrode.

Copper nanowires in recent electronic applications: progress and perspectives

Superstable Copper Nanowire Network Electrodes by Single-Crystal Graphene Covering and Their Applications in Flexible Nanogenerator and Light-Emitting Diode

Stretchable Transparent Conductors Based on Copper Nanowires and Polyurethane

Passivation coating on electrospun copper nanofibers for stable transparent electrodes.

Fast Fabrication Of Copper Nanowire Transparent Electrodes By A High Intensity Pulsed Light Sintering Technique In Air

Purification of Copper Nanowires to Prepare Flexible Transparent Conductive Films with High Performance

Silver‐Nanowire Mesh‐Structured Transparent Conductive Film with Improved Transparent Conductive Properties and Mechanical Performance

Highly robust, transparent, and conductive films based on AgNW-C nanowires for flexible smart windows

Zinc Oxide-Encapsulated Copper Nanowires for Stable Transparent Conductors

The Fabrication of Cu Nanowire/graphene/al Doped ZnO Transparent Conductive Film on PET Substrate with High Flexibility and Air Stability

Highly Transparent, Conductive, Flexible Resin Films Embedded with Silver Nanowires.