Abstract:Stainless steel monolith was chosen as catalyst support to overcome the drawbacks of poor thermal stability with catalysts using traditional gamma-Al2O3 and cordierite honeycomb as the substrate. During the catalyst preparation process, anodic oxidation technique was used to produce a porous membrane over the support surface, leading to effective dispersion of platinum and palladium on stainless steel monolith. The results show that the temperature for the total oxidation of acetone is 160, 160 and 200 degrees C, respectively, with the catalyst calcined at 500, 800 and 1 000 degrees C. The role of porous membrane over the stainless steel monolith surface is important for fixing active components of platinum and palladium particles, which leads to the enhanced catalytic activity for total acetone oxidation. This 0.1% Pt-0.02% Pd/stainless steel monolith catalyst exhibits the following advantages: a) high temperature stability in the whole temperature range investigated (500 similar to 1 000 degrees C), b) better catalytic activity than those platinum and palladium supported catalysts over gamma-Al2O3 and cordierite honeycomb support previously reported, c) low metal loading of platinum and palladium components (0.1wt% Pt and 0.02wt% Pd). The microstructures, surface dispersion condition of platinum and palladium active components were studied by means of scanning electron microscopy(SEM) and energy- dispersive X-ray spectroscopy(EDX).

Combustion of Volatile Organic Compounds over Pt-Pd/catalyst Supported on Stainless Steel Pretreated by Anodic Oxidation

Optimizing Alkyne Hydrogenation Performance of Pd on Carbon in Situ Decorated with Oxygen-Deficient TiO2 by Integrating the Reaction and Diffusion

Preparation and Performance of Cu Based Catalyst on Stainless Steel Wire Mesh

Support Effect, Thermal Stability, and Structure Feature of Toluene Combustion Catalyst

Catalytic Oxidation of Toluene, Acetone and Ethyl Acetate on a New Pt-Pd/Stainless Steel Wire Mesh Catalyst

Pd-Y/Stainless Steel Wire Mesh Catalyst for Combustion of Volatile Organic Compounds

Novel metallic electrically heated monolithic catalysts towards VOC combustion

Boosting Toluene Combustion in Pt-Co3O4 Catalysts by Directional Tuning Strong Metal-Support Interactions Through Metal-Organic Template Pyrolysis

Preparation Process and Characterization of New Pt/stainless Steel Wire Mesh Catalyst Designed for Volatile Organic Compounds Elimination

A Novel Catalyst Supported on Stainless Steel Pretreated by Anodic Oxidation for Control of Volatile Organic Compound Emissions

Preparation and Performance of Ce-Pt-Pd/Stainless Steel Wire Meshes Catalyst

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Pd‐Mn/Stainless Steel Wire Mesh Catalyst for Catalytic Oxidation of Toluene, Acetone and Ethyl Acetate

Pd-Mn/Stainless Steel Wire Mesh Catalyst for Catalytic Oxidation of Toluene, Acetone and Ethyl Acetate (vol 27, pg 1903, 2009)

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Efficient catalytic oxidation of VOCs by a Pd-Pt/SiO 2 catalyst: The cooperative catalysis of dual metal sites

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

0.1%Pt-0.02%Pd/stainless steel monolith catalyst: Catalytic oxidation of acetone and thermal stability

Removal of toluene over bi-metallic Pt–Pd-SBA-15 catalysts: Kinetic and mechanistic study

Study on the combustion of toluene by acid etching assisted ultrasonic supported low content Pt catalyst

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO 2 -Promoted C 3 H 8 Combustion over a Pt/TiO 2 Catalyst