Abstract:Voltage sags have become one of the most important power quality issues in recent years. According to survey results across the US, voltage sags and short duration power outages account for 92% of power quality problems encountered by industrial customers. Voltage sags often causes undervoltage faults in various sensitive loads and subsequently interrupt manufacturing processes. Such interruptions often inflict severe losses for industries. The existing sag compensation systems accomplish fast response within small fraction of a fundamental cycle by tracking the line voltages closely, and switch on the compensator whenever the voltage waveforms deviate from the normal values. However, utility voltages often contain surges and spikes with amplitudes up to 200% resulting from the switching of power factor correction capacitors and lightning strikes. Such transient disturbances may trigger the sag compensator into operation if the controller is very sensitive. The switching frequency of the compensation inverter is insufficient to compensate the narrow pulses of voltage spikes. Furthermore, the power semiconductors of the inverter may also be damaged by the surges. In this paper, a synchronous reference frame (SRF) based sag compensation scheme are presented. A sag detection mechanism is included in the controller for correct and prompt identification of voltage sags. Disturbances like voltage spikes are attenuated to avoid any false triggering of the compensator. The overall system responds to voltage sags and restore the voltage back to balanced 1.0 pu. for the critical loads within one-eighth to one-fourth of a cycle, which meet the requirement of ITI standard and SEMI-F47 standard. Simulation and laboratory test results will be presented to verify the functionality of the proposed controller.

A Series Voltage Compensator Based on Thyristor-Controlled Transformer

A Hybrid Static Compensator for Dynamic Reactive Power Compensation and Harmonic Suppression

Investigation on Voltage Source Series Resonant Converter with Series Compensation for CEET

Analyses of Static and Dynamic Reactive Power Allocation Between Synchronous Compensators and Shunt Capacitors to Counter Commutation Failures

A Novel Transformer-Less Series Voltage Sag Compensator Without Energy Storage Capacitors and Its New Time Optimal Control Strategy

A Novel Comprehensive Compensator for Electrified Railway System

A novel AC-AC series voltage compensator without large energy storage elements and using partial power conversion

An Improved Hybrid Static Synchronous Compensator

Design and Implementation of a Series Voltage Sag Compensator under Practical Utility Conditions

A Transformer Inrush Mitigation Method for Series Voltage Sag Compensators

A Novel STATCOM Based on Cascaded Three-phases Voltage Source Inverter

CONTROL METHOD OF SINGLE PHASE SERIES VOLTAGE QUALITY COMPENSATOR

A Dynamic Series Voltage Compensator for the Mitigation of LCC-HVDC Commutation Failure

Modeling, Simulation and Control Strategy of a Novel 10 Kv 15-Level M-STATCOM under SVG Condition

Application of Virtual Instrument to SVC Control System

Modeling of static var compensator-high voltage direct current to provide power and improve voltage profile

A Transformerless Compensator Used in Traction Substation for Load Balancing

Research of new controlled series compensation using variable structure control based on TCT

Investigation on Different Compensation Topologies in Inductively Coupled Power Transfer System

STATIC VAR COMPENSATOR BASED ON THE METHOD OF SYNCHRONOUS SYMMETRICAL COMPONENT

An Inrush Mitigation Technique of Load Transformers for the Series Voltage Sag Compensator