Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Fire Resistance Analysis And Damage Grade Evaluation Of A Structure

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

Effect of fire on concrete and concrete structures

Study on Membrane Damage and Collapse of Air-Supported Structures under Fire Conditions

NUMERICAL ANALYSIS OF FIRE?INDUCED PROGRESSIVE COLLAPSE OF A MULTI?STOREY REINFORCED CONCRETE FRAME

The mechanical response analysis of a super tall concrete structure under fire

Behaviour of Endplate Joints Subjected to Elevated Temperature after Cyclic Loads

Analysis of Fire Resistance of Square-Cased Square Steel Tube Reinforced Concrete (ST-RC) Columns

When Fire Attacks: How does Concrete Stand up to Heat ?

Development of the Research on Fire-Resistance of Structures

Numerical Analysis on Fire Induced Structure Failure of Gymnasium

Research on Mechanical Behavior of the Steel-Concrete-Steel Composite Structures Subjected to High Temperature of Fire

Full-range Analysis of Steel Reinforced Concrete Column Subjected to Fire

Fire Resistant Design of Steel Structure

Performance of Concrete-Filled Steel Tubular Column-Wall Structure Subjected to ISO-834 Standard Fire: Analytical Behaviour

Preliminary Research on Mechanical Behavior of Composite Frame with Concrete-filled Steel Tubular Columns after Exposure to Overall Stage of Fire

A Case Study on a Fire-Induced Collapse Accident of a Reinforced Concrete Frame-Supported Masonry Structure

Experimental Study on Fire Resistance of Reinforced Concrete Frame Structure

Structure Behavior of Concrete Filled Double-Steel-plate Composite Walls under Fire

Effect of Force-Temperature Paths on Behaviors of Reinforced Concrete Flexural Members

Impact performance and damage assessment of GFRP-RC columns at high temperatures: a numerical insight